Northwest EMC - New York Lab

NVLAP Lab Code: 200761-0

Address and Contact Information:

4939 Jordan Road
Elbridge, NY 13060
Contact: Mrs. Vicki Albertson
Phone: 503-844-4066
Fax:
E-Mail: valbertson@nwemc.com
Send E-Mail to Laboratory: Northwest EMC
URL: http://www.nwemc.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

Electromagnetic Compatibility & Telecommunications

Accreditation Valid From: October 1, 2011 Through: September 30, 2012

Emissions Test Methods

[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

[12/610006p] IEC 61000-6-3 (2006-06)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

[12/61000g] EN 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments

[12/61326a5] BS EN 61326-2-2 (2006-06)
EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

[12/61326a6] EN 61326-2-1 (2006-05)
EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for EMC unprotected applications

[12/61326a7] EN 61326-2-3 (2006-08)
EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

[12/CIS11ii] IEC/CISPR 11, Ed. 4.1 (2004-06) + A2 (2006)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11jj] EN 55011 (2007) + A2 (2007)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11p] IEC/CISPR 11 Ed. 5 (2009-05)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

[12/CIS11pp] IEC/CISPR 11 Ed 5 (2009-05) + A1 (2010)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

[12/CIS22L] EN 55022 (2006) + A1 (2007)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS22c4] EN 55022 (1998) + A1(2000) + A2(2003)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS22c5] IEC/CISPR 22, Edition 5 (2005) + A1(2005) + A2 (2006)
Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement

[12/CIS22g] IEC/CISPR 22, Edition 5 (2005-04) and EN 55022 (2006)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

[12/EM02i] IEC 61000-3-2, Ed. 3.0 (2005-11)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)

[12/EM02ii] IEC 61000-3-2, Ed. 3.0 (2005) +A1 (2008) +A2 (2009)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)

[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)

[12/EM03h] IEC/EN 61000-3-3 (1995) + A1 (2001) + A2 (2005)
Conducted Emissions, Voltage Flicker

[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators

Immunity Test Methods

[12/610006h] IEC 61000-6-1, 2nd edition (2005-03)
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments

[12/610006i] IEC 61000-6-2, Edition 2.0 (2005-01)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/61000k] EN 61000-6-1 (2007)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments

[12/CIS24e] IEC/CISPR 24 (1997) and EN 55024 (1998) + A1(2001), A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/I01d] IEC 61000-4-2, Ed. 2.0 (2008-12)
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

[12/I02ggg] IEC 61000-4-3, Ed. 3.0 (2006-02) + A1 (2007) + A2 (2010)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

[12/I02i] IEC 61000-4-3, Ed. 3.1 (2008-04)
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

[12/I04c] IEC 61000-4-5, Ed 1.1 (2005-11)
EMC - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I05f1] IEC 61000-4-6 Ed. 3.0 (2008)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I07c] IEC 61000-4-11, Ed. 2 (2004-03) & EN 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

Product Safety Test Methods

[12/60601ab] IEC 60601-1-2, Ed. 3.0 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests

[12/60601e] IEC 60601-1-1 (2000-12), 2nd edition
Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems

[12/60601h] EN 60601-1-2 (2001)
Medical electrical equipment - Part 1 and Part 1-2: General requirements for safety: Collateral standard: EMC - Requirements and tests

[12/60601h1] EN 60601-1-2 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: EMC - Requirements and tests

Return to NVLAP Program Listing