Advance Testing Company Inc.

NVLAP Lab Code: 200514-0

Address and Contact Information:

3348 Route 208
Campbell Hall, NY 10916-3508
Contact: Mr. Brian Schutz, P.E.
Phone: 845-496-1600
Fax: 845-496-1398
Send E-Mail to Laboratory: Advance Testing Company Inc.

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of April 18, 2014. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at:

Construction Materials Testing

Accreditation Valid From: April 1, 2014 Through: March 31, 2015

  • Aggregates

[02/A03] ASTM C29
Unit Weight and Voids in Aggregates

[02/A04] ASTM C40
Organic Impurities in Fine Aggregate

[02/A05] ASTM C87
Effect of Organic Impurities in Fine Aggregates on Strength of Mortar

[02/A06] ASTM C88
Soundness of Aggregates by Use of Sodium Sulfate

[02/A07] ASTM C117
Materials Finer than No. 200 Sieve in Mineral Aggregates by Washing

[02/A08] ASTM C123
Lightweight Pieces in Aggregate

[02/A09] ASTM C127
Specific Gravity and Absorption of Coarse Aggregate

[02/A10] ASTM C128
Specific Gravity and Absorption of Fine Aggregate

[02/A11] ASTM C131
Resistance to Degradation of Small-Size Coarse Aggregate in the Los Angeles Machine

[02/A12] ASTM C136
Sieve Analysis of Fine and Coarse Aggregates

[02/A13] ASTM C142
Clay Lumps and Friable Particles in Aggregates

[02/A15] ASTM D75
Practice for Sampling Aggregates

[02/A16] ASTM D2419
Sand Equivalent Value of Soils and Fine Aggregate

[02/A44] ASTM C566
Total Moisture Content of Aggregate by Drying

  • Cement

[02/A17] ASTM C109
Compressive Strength of Hydraulic Cement

[02/A21] ASTM C157
Length Change of Hardened Cement Mortar and Concrete

[02/A23] ASTM C185
Air Content of Hydraulic Cement Mortar

[02/A28] ASTM C227
Alkali Reactivity of Cement-Aggregate Combinations (Mortar Bar Method)

[02/A31] ASTM C305
Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

[02/A51] ASTM C780 (Annex A7)
Compressive Strength of Molded Masonry Mortar Cylinders and Cubes

[02/A52] ASTM C1019
Sampling and Testing Grout

  • Concrete

[02/A01] ASTM C39
Compressive Strength of Cylindrical Specimens

[02/A02] ASTM C617
Capping Cylindrical Specimens

[02/A40] ASTM C78
Flexural Strength of Concrete Simple Beam with Third Point Loading

[02/A41] ASTM C192
Making and Curing Concrete Specimens in the Laboratory (requires C173, C231, C138, C143, C136, C127, C128, C566, C1064, C29, C40, C117)

[02/A43] ASTM C1064
Temperature of Freshly Mixed Portland Cement Concrete

[02/A45] ASTM C42
Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

[02/A53] ASTM C1231
Determination of Compressive Strength of Hardened Concrete Using Unbonded Caps

[02/A55] ASTM C140
Sampling and Testing Concrete Masonry Units and Related Units

[02/A56] ASTM C1314
Compressive Strength Of Masonry Prisms

[02/G01] ASTM C31/C172/C143/C138/C231
Making and Curing Test Specimens/Sampling Freshly Mixed Concrete/Slump of Portland Cement Concrete/Unit Weight, Yield and Air Content/Air Content-Pressure Method

  • Geotextiles

[02/L48] ASTM D5321
Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method

[02/L49] ASTM D6243
Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by Direct Shear Method

  • Road and Paving Materials

[02/M01] ASTM D5
Penetration of Bituminous Materials

[02/M03] ASTM D140
Sampling Bituminous Materials

[02/M07] ASTM D546
Sieve Analysis of Mineral Filler

[02/M08] ASTM D979
Sampling Bituminous Paving Mixtures

[02/M15] ASTM D1856
Recovery of Asphalt by the Abson Method

[02/M19] ASTM D2172
Quantitative Extraction of Bitumen from Bituminous Paving Mixtures

[02/M24] ASTM D2041
Theoretical Maximum Density (Rice Method)

[02/M25] ASTM D2726
Bulk Density of Cores (SSD)

[02/M27] ASTM D6307
Asphalt Content of Hot-Mix Asphalt by Ignition Method

[02/M30] ASTM D6927
Marshall Stability and Flow of Bituminous Mixtures

[02/M31] ASTM D6925
Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

[02/M33] ASTM D2950
Density of Bituminous Concrete in Place by Nuclear Methods

  • Soil and Rock

[02/L02] ASTM D422
Particle Size Analysis of Soils

[02/L04] ASTM D698
Moisture Density Relations of Soils and Soil-Aggregate Mixtures Using 5.5-lb Rammer and 12-inch Drop

[02/L05] ASTM D854
Specific Gravity of Soils

[02/L06] ASTM D1140
Amount of Material in Soils Finer Than the #200 Sieve

[02/L07] ASTM D1556
Density of Soil by the Sand Cone Method

[02/L08] ASTM D1557
Moisture Density Relations of Soils and Soil-Aggregate Mixtures Using 10-lb Rammer and 18-inch Drop

[02/L10] ASTM D1883
Bearing Ratio of Laboratory Compacted Soils

[02/L11] ASTM D2166
Unconfined Compr. Strength of Cohesive Soil

[02/L12] ASTM D2168
Calibration of Laboratory Mechanical Rammer Soil Compactors

[02/L13] ASTM D2216
Determination of Water (Moisture) Content of Soil, Rock, and Soil-Aggregate Mixtures

[02/L15] ASTM D2435
One-Dimensional Consolidation Properties of Soils

[02/L16] ASTM D2487
Classification of Soils for Engr. Purposes

[02/L18] ASTM D3080
Direct Shear Tests of Soils Under Consolidated Drained Conditions

[02/L19] ASTM D4254
Minimum Index Density of Soils and Calculation of Relative Density

[02/L20] ASTM D4318
Liquid Limit, Plastic Limit, and Plasticity Index of Soils

[02/L21] ASTM D2434
Permeability of Granular Soils (Constant Head)

[02/L22] ASTM D2850
Unconsolidated, Undrained Strength of Cohesive Soils in Triaxial Compression

[02/L24] ASTM D2974
Moisture, Ash, and Organic Matter of Peat Material

[02/L26] ASTM D4221
Dispersive Characteristics of Clay Soil by Double Hydrometer

[02/L27] ASTM D4253
Max. Index Density of Soils - Vibratory Table

[02/L46] ASTM D5084
Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

[02/L60] ASTM D6938
In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

  • Standard Practices and Specifications

[02/A38] ASTM E329
Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction

[02/A39] ASTM C1077
Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation (requires ASTM C31, C39, C40, C117, C127, C128, C136, C138, C143, C172, C173)

[02/A50] ASTM C1093
Standard Practice for the Accreditation of Testing Agencies for Unit Masonry

[02/L32] ASTM D3740
Standard Practice for Minimum Requirement for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

[02/L59] ASTM D4718
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

[02/M26] ASTM D3666
Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Bituminous Paving Materials

[02/M29] ASTM D6926
Standard Practice for Preparation of Bituminous Specimens Using the Marshall Apparatus

[02/S07] ASTM E709
Standard Recommended Practice for Magnetic Particle Examination

[02/S08] ASTM E165
Standard Recommended Practice for Liquid Penetrant Inspection Method

  • Steel Materials

[02/S10] AWS D1.1, Sec. 6, Part F
Structural Welding Code-Steel: Sec. 6, Part F, Ultrasonic Testing

Return to NVLAP Program Listing