Global Testing Laboratories, LLC
NVLAP Lab Code: 200409-0
Address and Contact Information:
3029 Gov. John Sevier Hwy.Knoxville, TN 37914-6424
Contact: Ms. Deborah Walker Sharp
Phone: 865-523-9972 x106
Fax: 865-637-7598
E-Mail: DWalker@globaltestinglabs.com
Send E-Mail to Laboratory: Global Testing Laboratories, LLC
URL: http://www.globaltestinglabs.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.Send E-Mail to NVLAP at: NVLAP@nist.gov
Electromagnetic Compatibility & Telecommunications
Accreditation Valid From: July 1, 2011 Through: June 30, 2012
- Emissions Test Methods
[12/12895] EN 12895 (2000)
Industrial trucks - Electromagnetic compatibility
[12/13309] BS EN 13309 (2000-09)
Construction machinery. Electromagnetic compatibility of machines with internal electrical power supply
[12/13766] ISO 13766 (1999)
Earth-moving machinery -- Electromagnetic compatibility
[12/14982] EN ISO 14982 (1998)
Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982: 1998)
[12/CIS11m] EN 55011 (2007)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11p] IEC/CISPR 11 Ed. 5 (2009-05)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[12/CIS14a4] EN 55014-1 (2006)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14f] AS/NZS 1044 (2001) and A1 (2001)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14g] CNS 13783-1 (2001) and A1 (2001)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14gg] CNS 13783-1 (2004)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14h] AS/NZS CISPR 14.1 (2003)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission
[12/CIS14x2] IEC/CISPR 14-1, Ed. 5.1 (2009)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission
[12/CIS22f] CNS 13438 (2006)
LImits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
[12/CIS22j] EN 55022 (2006)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22j1] EN 55022 (2006) + A1 (2007)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22k] IEC/CISPR 22 (2008-09)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/EM02ii] IEC 61000-3-2, Ed. 3.0 (2005) +A1 (2008) +A2 (2009)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)
[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
[12/EM03ii] IEC 61000-3-3, Edition 1.2 (2005-10)
EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
[12/EM03m] EN 61000-3-3, Ed. 2.0 (2008-09)
EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
[12/EM03n] IEC 61000-3-3 Ed. 2.0 (2008)
EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current =16 A per phase and not subject to conditional connection
[12/EM12] IEC 61000-3-12, Rev 04, November 2004
Electromagnetic Compatibility (EMC) - PART 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A
[12/EN11] EN 61000-3-11, Rev 01, Feb 2001
Electromagnetic Compatibility (EMC) Limits, Limitation of Voltage Changes, Voltage Fluctuations and Flicker in public low-voltage supply systems - Equipment with rated voltage current < 75 A and subject to conditional connection
[12/F18] FCC OST/MP-5 (1986)
FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment)
[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators
[12/FCC15bb] ANSI C63.4 (2009) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators
[12/KN11d] KN11 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11
[12/KN11d1] KN11 (Annex 3) with RRA Announce 2008-11 (Dec. 16, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3)
[12/KN14b] KN 14-1 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission
[12/KN22e] KN22 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22
- Immunity Test Methods
[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/61326j] IEC 61326-2-6, Ed. 1.0 (2005-12)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
[12/CIS20] IEC/CISPR 20 (2002-02) and EN 55020 (1994)
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
[12/CIS24e] IEC/CISPR 24 (1997) and EN 55024 (1998) + A1(2001), A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/I01d] IEC 61000-4-2, Ed. 2.0 (2008-12)
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
[12/I02g] IEC 61000-4-3, Ed. 3.0 (2006-02)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I02gg] IEC 61000-4-3, Ed. 3.0 (2006-02) + A1 (2007)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I02h] EN 61000-4-3 (2006)
Radiated, radio-frequency, electromagnetic field immunity test
[12/I02hh] EN 61000-4-3 (2006) +A1 (2008)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio- Frequency, electromagnetic field immunity test
[12/I02i] IEC 61000-4-3, Ed. 3.1 (2008-04)
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I03d] IEC 61000-4-4, Ed. 2.0; Corr1:2006
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I03d1] IEC 61000-4-4, Ed. 2.0; Corr1:2006 + Corr2:2007
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I03d2] IEC 61000-4-4, Ed. 2.0; Corr2:2007
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I03e] EN 61000-4-4 (2004)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I04c] IEC 61000-4-5, Ed 1.1 (2005-11)
EMC - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I04c1] IEC 61000-4-5, Ed 2 (2005-11)
EMC - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I04d] BS EN 61000-4-5 (2006)
[12/I05f1] IEC 61000-4-6 Ed. 3.0 (2008)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I05j] EN 61000-4-6 (2009)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I06e] IEC 61000-4-8 (2009)
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[12/I07g] IEC 61000-4-11 (2004)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
- Product Safety Test Methods
[12/60601a] IEC 60601-1-2, Ed1(1993);Ed2(2001-09); JIS T0601-1-2(2002.7)
Medical electrical equipment - Part 1 and Part 1-2: General requirements for safety: Collateral standard: EMC - Requirements and tests
[12/60601aa] IEC 60601-1-2, Ed 2.1 (2004-11) & EN 60601-1-2 (2002)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
Return to NVLAP Program Listing