Fong Prean Industrial Co., Ltd.

NVLAP Lab Code: 200288-0

Address and Contact Information:

No. 6 Kung-Wei St. Tzu Hsin T'Sun
Tzu Kuan Hsiang
Kaohsiung Hsien
TAIWAN
Contact: Mr. Lee Yueh Lin
Phone: 886-7-6170526
Fax: 886-7-6107365
E-Mail: arnold@ms.fongprean.com.tw
Send E-Mail to Laboratory: Fong Prean Industrial Co., Ltd.

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

Fasteners & Metals

Accreditation Valid From: April 1, 2011 Through: March 31, 2012

Dimensional Inspection

  • Dimensions of general purpose fasteners and high-volume machine assembly fasteners

[FA/854] ANSI/ASME B18.6.4
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch Series)

[FA/855] ISO 1479
Hexagon Head Tapping Screws

Mechanical and Physical Testing and Inspection

  • Drill-drive test

[FA/247] SAE J78
Steel Self-Drilling Tapping Screws

[FA/851] DIN 7504
Dimensions, Requirements and Testing for Self-Drilling Tapping Screws

  • Measurement of fastener coating thickness - X-ray methods

[FA/760] ASTM A754/A754M
Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

  • Microhardness of fasteners

[FA/189] ASTM E384
Standard Test Method for Microhardness of Materials

  • Rockwell hardness of fasteners

[FA/197] ASTM E18 (A, B, & C)
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

  • Salt spray testing of fasteners

[FA/166] ASTM B117
Standard Test Method of Salt Spray (Fog) Testing

  • Torsional strength test of thread rolling and self-drilling tappings screws

[FA/751] SAE J933
Mechanical and Quality Requirements for Tapping Screws

[FA/852] ISO 2702
Heat-Treated Steel Tapping Screws - Mechanical Properties

[FA/853] DIN 7504
Dimensions, Requirements and Testing for Self-Drilling Tapping Screws

Metallography

  • Decarburization and case depth measurement in fasteners

[FA/330] SAE J423
Methods of Measuring Case Depth

  • Surface discontinuities of externally threaded fasteners

[FA/357] ASTM F788/788M
Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

[FA/361] SAE J123
Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications

Return to NVLAP Program Listing