Casey Products

NVLAP Lab Code: 200278-0

Address and Contact Information:

11230 Katherine's Crossing, Suite 400
Woodridge, IL 60517
Contact: Mr. Michael B. Connelly, CQE
Phone: 630-960-3360
Fax: 630-960-3419
E-Mail: mconnell@caseyproducts.com
Send E-Mail to Laboratory: Casey Products
URL: http://www.caseyproducts.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

Fasteners & Metals

Accreditation Valid From: April 1, 2011 Through: March 31, 2012

Dimensional Inspection

  • Dimensions of ISO grade A and B fasteners

[FA/407] ISO 3269
Fasteners - Acceptance Inspections

[FA/408] ISO 4759-1
Tolerances for Fasteners - Part 1: Bolts, Screws, and Nuts with Thread Diameters between 1.6 (inclusive) and 150 mm (inclusive) and Product Grades A, B, and C

  • Dimensions of ISO grade C fasteners

[FA/409] ISO 3269
Fasteners - Acceptance Inspections

[FA/410] ISO 4759-1
Tolerances for Fasteners - Part 1: Bolts, Screws, and Nuts with Thread Diameters between 1.6 (inclusive) and 150 mm (inclusive) and Product Grades A, B, and C

  • Dimensions of fasteners - hexagon and double hexagon (12 point) and spline sockets

[FA/411] ANSI/ASME B18.3
Socket Cap, Shoulder and Set Screws (Inch Series)

[FA/412] ANSI/ASME B18.3.1M
Socket Head Cap Screws (Metric Series)

[FA/413] ANSI/ASME B18.3.3M
Hexagon Socket Head Shoulder Screws (Metric Series)

[FA/414] ANSI/ASME B18.3.4M
Hexagon Socket Button Head Cap Screws (Metric Series)

[FA/415] ANSI/ASME B18.3.5M
Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series)

[FA/416] ANSI/ASME B18.3.6M
Metric Series Socket Set Screws

  • Dimensions of fasteners - straightness

[FA/423] ANSI/ASME B18.2.1
Square and Hex Bolts and Screws - Inch Series

[FA/424] ANSI/ASME B18.2.3.1M
Metric Hex Cap Screws

[FA/425] ANSI/ASME B18.2.3.2M
Metric Formed Hex Screws

[FA/426] ANSI/ASME B18.2.3.3M
Metric Heavy Hex Screws

[FA/427] ANSI/ASME B18.2.3.4M
Metric Hex Flange Screws

[FA/428] ANSI/ASME B18.2.3.5M
Metric Hex Bolts

[FA/429] ANSI/ASME B18.2.3.6M
Metric Heavy Hex Bolts

[FA/433] ANSI/ASME B18.5.2.2M
Metric Round Head Square Neck Bolts

  • Dimensions of general purpose fasteners and high-volume machine assembly fasteners

[FA/403] ANSI/ASME B18.18.1M
Inspection and Quality Assurance for General Purpose Fasteners

[FA/404] ANSI/ASME B18.18.2M
Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners

  • Dimensions of special purpose fasteners and fasteners for highly specialized engineered ap

[FA/405] ANSI/ASME B18.18.3M
Inspection and Quality Assurance for Special Purpose Fasteners

[FA/406] ANSI/ASME B18.18.4M
Inspection and Quality Assurance for Fasteners for Highly Specialized Engineered Applications

  • External thread parameters - ISO

[FA/390] ISO 1502
ISO General Purpose Metric Screw Threads - Gauging

  • External thread parameters - SAE fastener with MJ metric screw threads

[FA/922] ANSI/ASME B1.3M
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

  • External thread parameters - system 21

[FA/379] ANSI/ASME B1.3M
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

[FA/940] ANSI/ASME B1.2
Gages and Gaging for Unified Inch Screw Threads

[FB/1248] ANSI/ASME B1.16M
Gages and Gaging for Metric M Screw Threads

  • External thread parameters - system 22

[FA/381] ANSI/ASME B1.3M
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

[FA/941] ANSI/ASME B1.2
Gages and Gaging for Unified Inch Screw Threads

[FB/1249] ANSI/ASME B1.16M
Gages and Gaging for Metric M Screw Threads

  • Internal thread parameters - ISO

[FA/402] ISO 1502
ISO General Purpose Metric Screw Threads - Gauging

  • Internal thread parameters - system 21

[FA/391] ANSI/ASME B1.3M
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

[FA/942] ANSI/ASME B1.2
Gages and Gaging for Unified Inch Screw Threads

[FA/946] ANSI/ASME B1.16M
Gages and Gaging for Metric M Screw Threads

  • Internal thread parameters - system 22

[FA/393] ANSI/ASME B1.3M
Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)

[FA/943] ANSI/ASME B1.2
Gages and Gaging for Unified Inch Screw Threads

[FA/947] ANSI/ASME B1.16M
Gages and Gaging for Metric M Screw Threads

Mechanical and Physical Testing and Inspection

  • Axial tensile strength of full-size threaded fasteners

[FA/265] ASTM A370

[FA/266] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products

[FA/267] ASTM F606M

[FA/270] ISO 898-1
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs. Section 8.2: Tensile Test for Full-Size Bolts, Screws and Studs.

[FA/273] SAE J429
Mechanical and Material Requirements for Externally Threaded Fasteners

[FA/274] SAE J1216
Test Methods for Metric Threaded Fasteners, Section 3.5: Axial Tensile Strength

  • Measurement of fastener coating thickness - eddy-current method

[FA/149] ASTM E376
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods

  • Measurement of fastener coating thickness - magnetic methods

[FA/155] ASTM E376
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods

  • Microhardness of fasteners

[FA/189] ASTM E384
Standard Test Method for Microhardness of Materials

  • Prevailing torque

[FA/217] IFI-100/107
Prevailing-Torque Type Steel Hex and Hex Flange Nuts, Regular and Light Hex Series

  • Proof load of full-size externally threaded fasteners

[FA/225] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Sections A3.2.1.1 through A3.2.1.3 : Proof Load

[FA/226] ASTM F606

[FA/228] ISO 898-1
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 1: Bolts, Screws and Studs. Section 8.5: Proof Load Test for Full Size Bolts and Screws.

[FA/229] SAE J429
Mechanical and Material Requirements for Externally Threaded Fasteners

[FA/230] SAE J1216
Test Methods for Metric Threaded Fasteners, Section 3.3: Proof Load (Length Measurement)

[FA/467] ASTM F606M
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)

  • Proof load of internally threaded fasteners (nuts)

[FA/235] ASTM A370

[FA/236] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.2: Proof Load Test

[FA/237] ASTM F606M
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 4.2: Proof Load Test

[FA/239] ISO 898-2
Mechanical Properties of Fasteners - Part 2: Nuts with Specified Proof Load Values - Coarse Thread. Section 8.1: Proof Load Test

[FA/241] SAE J995
Mechanical and Material Requirements for Steel Nuts. Section 5.1: Proof Load Test

  • Rockwell hardness of fasteners

[FA/196] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 17. Rockwell Test (ASTM E18 is referenced for detailed requirements)

[FA/197] ASTM E18 (A, B, & C)
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

[FA/704] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets; Section 3.1 Product Hardness

[FB/1246] ASTM F606M
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.1 Product Hardness

  • Rockwell superficial hardness of fasteners

[FA/205] ASTM E18
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

[FA/206] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 17. Rockwell Test

[FB/1245] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets; Section 3.1 Product Hardness

[FB/1247] ASTM F606M
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Section 3.1 Product Hardness

  • Total extension at fracture of externally threaded fasteners

[FA/285] ASTM F606

[FA/286] ASTM F606M

  • Wedge tensile strength of full-size threaded fasteners

[FA/289] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products, Annex A3 - Steel Fasteners, Section A3.2.1.5: Tension Testing of Full Size Bolts with a Wedge, and Section A3.2.1.6: Wedge Testing of HT Bolts Threaded to Head

[FA/290] ASTM F606

[FA/291] ASTM F606M

[FA/294] ISO 898-1

[FA/468] SAE J429
Mechanical and Material Requirements for Externally Threaded Fasteners

[FA/469] SAE J1216
Test Methods for Metric Threaded Fasteners, Section 3.6: Wedge Tensile Strength

  • Yield strength of full-size externally threaded fasteners

[FA/298] ASTM F606

[FA/300] ASTM F606M

Metallography

  • Decarburization and case depth measurement in fasteners

[FA/323] ASTM E1077
Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

[FA/324] ISO 898-1

[FA/325] ISO 898-5
Mechanical Properties of Fasteners Made of Carbon Steel and Alloy Steel - Part 5: Set Screws and Similar Threaded Fasteners Not Under Tensile Stresses

[FA/328] SAE J121
Decarburization in Hardened and Tempered Unified Threaded Fasteners

[FA/329] SAE J419
Methods of Measuring Decarburization

[FA/330] SAE J423
Methods of Measuring Case Depth

[FA/483] ASTM A574
Standard Specification for Alloy Steel Socket-Head Cap Screws; Section 12

[FA/519] ASTM A574M
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]

[FA/520] ASTM F835
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

[FA/758] SAE J121M
Decarburization in Hardened and Tempered Metric Threaded Fasteners

[FA/866] ASTM F835M
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

[FA/867] ASTM F912
Standard Specification for Alloy Steel Socket Set Screws

[FA/868] ASTM F912M
Standard Specification for Alloy Steel Socket Set Screws (Metric)

  • Determination of grain size of fasteners

[FA/331] ASTM E112
Standard Test Methods for Determining Average Grain Size

  • Macroscopic examination of steel

[FA/484] ASTM E381
Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings.

[FA/511] ASTM E340
Standard Test Method for Macroetching Metals and Alloys

  • Microscopic examination of steel

[FA/512] ASTM E407
Standard Practice for Microetching Metals and Alloys

  • Surface discontinuities of externally threaded fasteners

[FA/357] ASTM F788/788M
Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

[FA/359] ISO 6157-1
Fasteners - Surface Discontinuities - Part 1: Bolts, Screws, and Studs for General Requirements

[FA/360] ISO 6157-3
Fasteners - Surface Discontinuities - Part 3: Bolts, Screws, and Studs for Special Requirements

[FA/361] SAE J123
Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications

[FA/362] SAE J1061
Surface Discontinuities on General Application Bolts, Screws, and Studs

[FA/859] ASTM A574
Standard Specification for Alloy Steel Socket-Head Cap Screws

[FA/860] ASTM A574M
Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

[FA/861] ASTM F835
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

[FA/862] ASTM F835M
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

[FA/863] ASTM F912
Standard Specification for Alloy Steel Socket Set Screws

[FA/864] ASTM F912M
Standard Specification for Alloy Steel Socket Set Screws (Metric)

  • Surface discontinuities of internally threaded fasteners

[FA/365] SAE J122

[FA/727] ISO 6157-2
Fasteners - Surface Discontinuities - Part 2: Nuts

[FA/865] ASTM F812/F812M
Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

Return to NVLAP Program Listing