Technology Services, National Voluntary Laboratory Accreditation Program, NIST Go to Technology Services Home Page Go to NIST Home Page Go to National Voluntary Laboratory Accreditation Program Home Page Go to Directory of Accredited Laboratories Go to Fields of Accreditation Go to Publications/Applications Go to Mutual Recognition Arrangements Go to Assessor Resources Contact National Voluntary Laboratory Accreditation Program

TUV Rheinland of North America

NVLAP Lab Code: 200094-0

Address and Contact Information:

762 Park Avenue
Youngsville, NC 27596-9470
Contact: Mr. Randle Sherian
Phone: 919-554-3668
Fax: 919-554-3542
E-Mail: rsherian@us.tuv.com
Send E-Mail to Laboratory: TUV Rheinland of North America
URL: http://www.tuv.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of November 28, 2008. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

Electromagnetic Compatibility & Telecommunications

Accreditation Valid From: July 1, 2008 Through: June 30, 2009

  • Emissions Test Methods:

[12/100063] CISPR/CEI-IEC 1000-6-3, First Edition (1996-12)
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments

[12/100063c] IEC 61000-6-3 (1996), EN 61000-6-3 (2001), A1 (2004)
Electromagnetic Compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial, and light-industrial environments.

[12/11451d] ISO 11451-4 (2006)
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)

[12/12895] EN 12895 (2000)
Industrial trucks - Electromagnetic compatibility

[12/13309] BS EN 13309 (2000-09)
Construction machinery. Electromagnetic compatibility of machines with internal electrical power supply

[12/13766] ISO 13766 (1999)
Earth-moving machinery -- Electromagnetic compatibility

[12/14982] EN ISO 14982 (1998)
Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982: 1998)

[12/50121cc] 0EN 50121-3-2 (2006)
Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus

[12/50121e] EN 50121-2 (2006)
Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside world

[12/50121f] EN 50121-3-1 (2006)
Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle

[12/50121g] EN 50121-4 (2006)
Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus

[12/50366] EN 50366 (2003)
Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement

[12/55012] CISPR 12 (2001), EN 55012 (2002) & BS EN 55012 (2002)
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics

[12/55103a] EN 55103-1 (1996)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission

[12/55103c] BS EN 55103-1 (1997)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1. Emission

[12/60E213] RTCA DO-160E
Section 21.3, RF Emissions, Conducted

[12/60E214] RTCA DO-160E
Section 21.4, RF Emissions, Radiated

[12/610006c] EN 61000-6-3 (2001) and IEC 61000-6-3 (1996)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

[12/610006d] EN 61000-6-4 (2001) and IEC 61000-6-4 (1997)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

[12/610006e] IEC 61000-6-4, First edition (1997-01)
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments

[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

[12/61000f] EN 61000-6-3 (2001) + A1 (2004)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments

[12/61000g] EN 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments

[12/61204a] IEC/EN 61204-3 (2001)
Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)

[12/61326e] IEC 61326-1, Edition 1.2 (2000-11)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/61800a] EN 61800-3 (1996) + A11 (2000)
Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods

[12/C37] IEEE Std C37.90.1 (2002)
Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus

[12/C62b] IEEE Std C62.41 Ring Wave (1991)
IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits

[12/CIS11]
IEC/CISPR 11 + A1 (1997), EN 55011 (1998), AS/NZS CISPR 11 (2002), and CNS 13803 (1997): Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipment

[12/CIS11a] IEC/CISPR 11, edition 3.1 (1999-08) & EN 55011 (1998)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11b] IEC/CISPR 11(2003) & EN 55011(1998), A1(1999), A2(2002)
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS11i] IEC/CISPR 11, Ed. 4.1 (2004-06) + A1(2004)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS13]
IEC/CISPR 13 (2001-04), EN 55013 (2001), AS/NZS CISPR 13 (2003), and CNS 13439 (2001): Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS13bb] EN 55013 (2001) + A1 (2003) + A2 (2005)
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS14] CISPR 14-1 (March 30, 2000)
Limits and Methods of Measurement of Radio interference Characteristics of Household Electrical Appliances, Portable Tools and Similiar Electrical Apparatus - Part 1: Emissions

[12/CIS14a1] EN 55014-1 (1998), A1 (1999), A2 (2001)
Electromagnetic Compatibility - Requirements for household applicances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14a3] EN 55014-1 (2000) with Amendments A1(2001) & A2 (2001)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14a4] EN 55014-1 (2006)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14d] IEC/CISPR 14-1 (2001) and A1 (2001)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emissions

[12/CIS15c] EN 55015 (2000) + A1 (2001)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

[12/CIS22] IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment

[12/CIS22a] IEC/CISPR 22 (1993) and EN 55022 (1994)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996)

[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment

[12/CIS22c4] EN 55022 (1998) + A1(2000) + A2(2003)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS22j] EN 55022 (2006)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/EM01] EN 50081-1 (1992)
Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry

[12/EM02] EN 61000-3-2(1995), A1 & A2 (1998), A14(2000)
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2. Limits for harmonic current emissions (equipment input current <= 16A per phase)

[12/EM02a]
IEC 61000-3-2, Edition 2.1 (2001-10), EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000): Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A)

[12/EM02aa] EN 61000-3-2 (2000) + A2 (2005)
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2. Limits for harmonic current emissions (equipment input current <= 16A per phase)

[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)

[12/EM03] IEC 61000-3-3(1995); EN 61000-3-3(1995); AS/NZS 2279.3(1995)
EMC - Part 3: Limits - Section 3. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up to 16A

[12/EM03b] IEC 61000-3-3, Edition 1.1(2002-03) & EN 61000-3-3, A1(2001)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections

[12/EM03c] IEC/EN 61000-3-3 (1994) with Amendment 1 (2001)
Conducted Emissions, Voltage Flicker

[12/EM03d] IEC/EN 61000-3-3 (1995) + A1 (2001)
Conducted Emissions, Voltage Flicker

[12/EM03e] BS EN 61000-3-3 (1995) & IEC 61000-3-3 (1994)+A1 & A2
EMC - Part 3: Limits - Section 3: Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

[12/EM11] IEC 61000-3-11, 1st edition (2000-08)
EMC - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems -Equipment with rated current <=75A and subject to conditional connection

[12/EN81b] EN 50081-2 (1994)
Electromagnetic compatibility - Generic emission standard - Part 2. Industrial environment

[12/F18] FCC OST/MP-5 (1986)
FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment)

[12/FCC11] ANSI C63.4 (2003) with FCC Method - 47 CFR Part 11
Emergency Alert System (EAS)

[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators

[12/FCC15c] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators

[12/FCC15c1] ANSI C63.4 (2003) and Millimeter Wave Test Procedures
IDB 20040420-001 with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators

[12/FCC15c2] DA 00-705 - March 30, 2000 and KDB Pub. No. 558074
with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators - (Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems - and - New Guidance on Measurements for Digital Transmission Systems in Section 15.247)

[12/FCC15c3] KDB Pub. No. 200433 Millimeter Wave Test Procedures
with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators

[12/FCC15cz] SS - MP with FCC Method - 15 CFR Part 15, Subpart C
Intentional Radiators

[12/FCC15d] ANSI C63.17(1998) and ANSI C63.4 (2003)
with FCC Method - 47 CFR Part 15, Subpart D: Unlicensed Personal Communications Service Devices

[12/FCC15e] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Service Devices

[12/FCC15e1] ANSI C63.4 (2003) and DA 02-2138
with FCC Method - CFR Part 15, Subpart E: Unlicensed National Information Infrastructure Service Devices - and - Measurement Procedure Update for Peak Transmit Power

[12/FCC15ez] UNII - MP with FCC Method - 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Services Devices

[12/FCC15f] FCC Report and Order ET Docket 98-153 (FCC 02-48)
and procedures in IDB 20021108-001 with FCC Method 47 CFR Part 15, Subpart F: Ultra-Wideband Operation

[12/ICES003] ICES-003 Issue 4 (2004)
Implementation and Interpretation of the Interference-Causing Equipment Standard for Digital Apparatus. (Industry Canada)

[12/T51] AS/NZS CISPR 22 (2002) and AS/NZS 3548 (1997)
Electromagnetic Interference - Limits and Methods of Measurement of Information Technology Equipment

[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/VCCIb] Agreement of VCCI V-3 (2006.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2006.04

  • Immunity Test Methods:

[12/50121a] EN 50121-1 (2000) and prEN 50121-1 (1997)
Railway applications - Electromagnetic compatibility - Part 1: General

[12/501304] EN 50130-4 (1996)
Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems

[12/501304a] EN 50130-4 (1995) + A1(1998) & A2(2003)
Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems

[12/55103b] EN 55103-2 (1996)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity

[12/55103d] BS EN 55103-2 (1997)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2. Immunity

[12/60E05] RTCA DO -160E
Section 5: Temperature

[12/60E06] RTCA DO-160E
Section 6: Humidity

[12/60E15] RTCA DO 160E
Section 15, Magnetic Effects

[12/60E16] RTCA DO160E
Section 16, Power Input

[12/60E17] RTCA DO-160E
Section 17, Voltage Spikes

[12/60E18] RTCA DO-160E
Section 18, Audio Frequency Conducted Susceptibility

[12/60E19] RTCA DO-160E
Section 19, Induced Signal Susceptibility

[12/60E204] RTCA DO-160E
Section 20.4, RF Susceptibility, Conducted

[12/60E205] RTCA DO-160E
Section 20.5, RF Susceptibility, Radiated

[12/60E22] RTCA DO-160E
Section 22, Lightning Induced Transient Susceptibility

[12/60E25] RTCA DO-160E
Section 25, Electrostatic Discharge (ESD)

[12/610006a] EN 61000-6-1 (2001)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments

[12/610006b] EN 61000-6-2 (2001)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/610006h] IEC 61000-6-1, 2nd edition (2005-03)
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments

[12/610006i] IEC 61000-6-2, Edition 2.0 (2005-01)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/610006j] EN 61000-6-2 (2005)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/61000k] EN 61000-6-1 (2007)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments

[12/61326] EN 61326 (1998) and IEC 61326 (1997)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/61326a1] EN 61326(1998) and IEC 61326(1997) + A1(1998) & A2(2001)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/61326a2] EN 61326 (1997), A1 (1998), A2 (2001), A3 (2003)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/CIS14i1] EN 55014-2 (1997)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard

[12/CIS14ia] IEC/CISPR 14-2, Edition 1.1 (2001-11)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

[12/CIS16a] IEC/CISPR 16-1, Ed. 2 (1999-10)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus

[12/CIS16b] IEC/CISPR 16-2 (1996)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity

[12/CIS20a] IEC/CISPR 20 (2002-02) Ed 4, A1(2002-10) and EN 55020 (2002)
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement

[12/CIS20c] EN 55020 (2007-01)
Sound and television broadcast receivers and associated equipment - immunity characteristics - Limits and methods of measurement

[12/CIS24] IEC/CISPR 24 (1997) A2(2002) & EN 55024 (1998) A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/CIS24b] AS/NZS CISPR 24 (2002)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/CIS24e] IEC/CISPR 24 (1997) and EN 55024 (1998) + A1(2001), A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/I01] IEC 61000-4-2, Ed. 1.2 (2001) + A1, A2; EN 61000-4-2
Electrostatic Discharge Immunity Test

[12/I02] IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002)
Radiated Radio-Frequency Electromagnetic Field Immunity Test

[12/I02h] EN 61000-4-3 (2006)
Radiated, radio-frequency, electromagnetic field immunity test

[12/I03] IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I04d] BS EN 61000-4-5 (2006)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test

[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I05g] EN 61000-4-6 (2006)
Immunity to Conducted Disturbances, Induced by Radio Frequency Fields

[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/I08a] EN 55024 (1998) + A1 (2001) + A2 (2003)
Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement

[12/I11] EN 50083-2 (1995)
Cabled distribution systems for television and sound signals - Part 2: Electromagnetic compatibility for equipment.

[12/I11c] EN 50083-2:2001 + Ammendment 1:2005
Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment

[12/J111302] SAE J1113-2 (1996-09)
Electromagnetic compatibility measurement procedures and limits for vehicle components (except aircraft) - Conducted immunity, 30 Hz to 250 kHz - all leads

[12/J111304] SAE J1113-4 (2004-08)
Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method

[12/J111313] SAE J1113-13 (2004-11)
Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 - Immunity to Electrostatic Discharge

[12/J111321] SAE J1113/21 (1998-01)
Road Vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 21 - Absorber-Lined Chamber

[12/J111324] SAE J1113/24
Immunity to radiated electromagnetic fields; 10 kHz to 200 MHz - Crawford TEM cell and 10 kHz to 5 GHz - Wideband TEM cell

  • Product Safety Test Methods

[12/60601aa] IEC 60601-1-2, Ed 2.1 (2004-11) & EN 60601-1-2 (2002)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests

[12/60687] IEC 60687 (1992)
Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S)

[12/61036] IEC 61036 (1996)

[12/61268] IEC 61268 (1996)
Alternating current static var-hour meters for reactive energy (classes 2 and 3)

[12/62053a] IEC 62053-21, 1st Edition (2003-01)
Electricity metering equipment (a.c.)-Particular requirements -Part 21: Static meters for active energy (classes 1 and 2)

[12/62053b] IEC 62053-22, 1st Edition (2003-01)
Electricity metering equipment (a.c.) – Particular requirements – Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

[12/62053c] IEC 62053-23, First Edition (2003-01)
Electricity metering equipment (a.c.) – Particular requirements – Part 23: Static meters for reactive energy (classes 2 and 3)

[12/C121] ANSI C12.1 (2001)
Electric Meters Code for Electricity Metering (Only Sections 4.7.2.6, 4.7.2.13, 4.7.3.1, 4.7.3.2, 4.7.3.3, 4.7.3.4, 4.7.3.5, 4.7.3.9, 4.7.3.10, 4.7.3.11, 4.7.3.12, 4.7.3.13, 4.7.3.14, 4.7.3.16, 4.7.3.17)

[12/C1220] ANSI C12.20 (2002)
Electricity Meters—0.2 and 0.5 Accuracy Classes (Only Sections 5.5.2.6, 5.5.2.13, 5.5.3.2, 5.5.3.3, 5.5.3.4, 5.5.3.5, 5.5.3.6, 5.5.3.10, 5.5.3.11, 5.5.3.12, 5.5.3.13, 5.5.3.14, 5.5.3.15, 5.5.3.17, 5.5.3.18)

  • RF Exposure Test Methods (SAR & MPE)

[12/50361] EN 50361 (2001)
Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz)

[12/50364] EN 50364 (2001)
Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RIF) and similar applications

[12/50371] EN 50371 (2002)
Generic standard to demonstrate the compliance of low power electronic and electric apparatus with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz)

  • Radio Test Methods

[12/300220a] EN 300 220-1 V1.3.1 (2000-09)
Electromagnetic compatibility and Radio spectrum Matters; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods

[12/300220b] ETSI EN 300 220-2 v1.3.1 (2000-09)
ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 550 mW; Part 2: Supplementary parameters not intended for conformity purposes

[12/300220c] EN 300 220-3 V1.1.1 (2000-09)
ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300220d] ETSI EN 300 220-1 V2.1.1 (2006-04)
Electromagnetic Compatibility Radio Spectrum Matters; Short Range Devices; Radio Equipment to be used in the 25 MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 500mW; Part 1: Technical Characteristics and Test Methods

[12/300220e] ETSI EN 300 220-2 V2.1.1 (2006-04)
ERM; Short Range Devices; Radio Equipment to be used in the 25MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 550 mW; Part 2: Supplementary Parameters Not Intended for Conformity Purposes

[12/300224a] EN 300 224-1 V1.3.1 (2001-01)
Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 1: Technical and functional characteristics, including test methods

[12/300224b] ETSI EN 300 224-2 v1.1.1 (2001-01)
Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

[12/300328a] ETSI EN 300 328-1 V1.2.2 (2000-07)
ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 1: Technical characteristics and test conditions

[12/300328b] ETSI EN 300 328-2 v1.2.1 (2001-12)
Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300328e] ETSI EN 300 328 V1.5.1 (2004-08)
ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300328f] ETSI EN 300 328 V1.6.1 (2004-07)
ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300328g] ETSI EN 300 328 V1.7.1 (2006-10)
ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300330a] ETSI EN 300 330-1 v1.3.2 (2002-12)
ERM; Short Range Devices; Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1: Technical characteristics and test methods

[12/300330b] ETSI EN 300 330-2 v1.1.1 (2001-06)
ERM; Short Range Devices (SRD); Radio equipment in the frequency range 9kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

[12/300330d] ETSI EN 300 330-2 V1.3.1 (2006-04)
ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive

[12/300431] ETSI EN 300 431 v1.4.1 (2002-07)
Fixed Radio Systems; Point-to-point equipment; Parameters for radio system for the transmission of digital signals operating in the frequency range 24.50 GHz to 29.50 GHz

[12/300440a] ETSI EN 300 440-1 v1.3.1 (2001-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods

[12/300440c] ETSI EN 300 440-2 v1.1.2 (2004-07)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

[12/300761a] ETSI EN 300 761-1 v1.2.1 (2001-06)
ERM; Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2.45 GHz frequency range; Part 1: Technical characteristics and methods of measurement

[12/300761b] ETSI EN 300 761-2 v1.1.1 (2001-06)
ERM; Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2.45 GHz frequency range; Part 2: Harmonized standard covering essential requirements under article 3.2 of the R&TTE Directive

[12/301021a] ETSI EN 301 021 v1.6.1 (2003--07)
Fixed Radio Systems; Point-to-multipoint equipment; Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz

[12/301126a] ETSI EN 301 126-1 v1.1.2 (1999-09)
Fixed Radio Systems; Conformance testing; Part 1: Point-to-Point equipment - Definitions, general requirements and test procedures

[12/301126b] ETSI EN 301 126-2-1 v1.1.1 (2000-12)
Fixed Radio Systems; Conformance testing; Part 2-1: Point-to-Multipoint equipment; Definitions and general requirements

[12/301126c] ETSI EN 301 126-2-2 v1.1.1 (2000-11)
Fixed Radio Systems; Conformance testing; Part 2-2: Point-to-Multipoint equipment; Test procedures for FDMA systems

[12/301126d] ETSI EN 301 126-2-3 v1.1.1 (2000-11)
Fixed Radio Systems; Conformance testing; Part 2-3: Point-to-Multipoint equipment; Test procedures for TDMA systems

[12/301126e] ETSI EN 301 126-2-4 v1.1.1 (2000-11)
Fixed Radio Systems; Conformance testing; Part 2-4: Point-to-Multipoint equipment; Test procedures for FH-CDMA systems

[12/301126f] ETSI EN 301 126-2-5 v1.1.1 (2000-11)
Fixed Radio Systems; Conformance testing; Part 2-5: Point-to-Multipoint equipment; Test procedures for DS CDMA systems

[12/301126h] ETSI EN 301 126-3-1 v1.1.2 (2002-12)
Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas; Definitions, general requirements and test procedures

[12/301213a] ETSI EN 301 213-1 v1.1.2 (2002-02)
Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 1: Basic parameters

[12/301213b] ETSI EN 301 213-2 v1.3.1 (2001-06)
Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 2: Frequency Division Multiple Access (FDMA) methods

[12/301213c] ETSI EN 301 213-3 v1.4.1 (2002-02)
Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in the frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 3: Time Division Multiple Access (TDMA) methods

[12/301213d] ETSI EN 301 213-4 v1.1.1 (2001-08): Fixed Radio Systems
Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 4: Direct Sequence Code Division Multiple Access (DS-CDMA) methods

[12/301213e] ETSI EN 301 213-5 v1.1.1 (2001-10): Fixed Radio Systems
Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24.25 GHz to 29.5 GHz using different access methods; Part 5: Multi-Carrier Time Division Multiple Access (MC-TDMA) methods

[12/301357] ETSI EN 301 357-2 v1.2.1 (2001-06): ERM
Cordless audio devices in the range 25 MHz to 2,000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

[12/301357a] ETSI EN 301 357-1 v1.2.1 (2001-06)
ERM: Cordless audio devices in the range 25 MHz to 2,000 MHz; Consumer radio microphones and in-ear monitoring systems operating in the CEPT harmonized band 863 MHz to 865 MHz; Part 1: Technical characteristics and test methods

[12/301357b] ETSI EN 301 357-2 V1.3.1 (2006-05)
ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz. Part 2: Harmonized EN covering essential requirements of 3.2 of the R&TTE Directive

[12/301489a] ETSI EN 301 489-1 v1.5.1 (2004-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

[12/301489b] ETSI EN 301 489-3 v1.4.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz

[12/301489c] ETSI EN 301 489-4 v1.3.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment and services

[12/301489d] ETSI EN 301 489-5 v1.3.1 (2002-08)
Electromagnetic compatibility & Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)

[12/301489e] ETSI EN 301 489-6 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment

[12/301489f] ETSI EN 301 489-7 v1.2.1 (2002-08)
ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)

[12/301489g] ETSI EN 301 489-8 v1.2.1 (2002-08)
ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations

[12/301489h] ETSI EN 301 489-9 v1.3.1 (2002-08)
ERM; EMC standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices

[12/301489i] ETSI EN 301 489-10 v1.3.1 (2002-08)
EMR; ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 10: Specific conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) equipment

[12/301489j] ETSI EN 301 489-16 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility standard for radio equipment and services; Part 16: Specific conditions for analogue cellular radio communications equipment, mobile and portable

[12/301489m] ETSI EN 301 489-17 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

[12/301489n] ETSI EN 301 489-18 v1.3.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment

[12/301489o] ETSI EN 301 489-19 v1.2.1 (2002-11)
ERM; ElectroMagnetic Compatibility (EMC) standard for radiio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1.5 GHz band providing data communications

[12/301489p] ETSI EN 301 489-20 v1.2.1 (2002-11)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)

[12/301489q] ETSI EN 301 489-23 v1.2.1 (2002-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (Ultra) Base Station (BS) radio, repeater and ancillary equipment

[12/301489r] ETSI EN 301 489-24 v1.2.1 (2002-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment

[12/301489s] ETSI EN 301 489-25 v2.2.1 (2003-05)
Electromagnetic compatibillity and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 25: Specific conditions for IMT-2000 CDMA Multi-carrier Mobile Stations and ancillary equipment

[12/301489t] ETSI EN 301 489-26 v2.2.1 (2003-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 26: Specific conditions for IMT-2000 CDMA Multi-carrier Base Stations and ancillary equipment

[12/301489u] ETSI EN 301 489-15 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment

[12/301489w] ETSI EN 301 489-22, v1.3.1 (2003-11)
ERM; ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment

[12/301489x] ETSI EN 301 489-12 v1.2.1 (2003-05)

[12/301489z] ETSI EN 301 489-1 v1.6.1 (2005-09)
ERM; ElectroMagnetic Compatability (EMC) Standard for Radio Equipment and Services; Common Technical Requirements

[12/301840a] ETSI EN 301 840-1, v1.1.1 (2001-06)
ERM; Digital radio microphones operating in the CEPT Harmonized band 1,785 MHz to 1,800 MHz; Part 1: Technical characteristics and methods of measurement

[12/301893b] ETSI EN 301 893 V1.3.1 (2005-08)
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

[12/ACA2003] ACA Standard 2003
Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003

[12/ARP3] Radiation Protection Series No. 3
Maximum Exposure Levels to Radiofrequency Fields - 3 kHz to 300 GHz

[12/CAN3C13] CAN3-C13-M83 (R2003)
Instrument Transformers

[12/CAN3C17] CAN3-C17-M84 (R2004)
Alternating-Current Electricity Metering

[12/EG07] IC LMB-EG-07 (2000-02)
Specification for Approval of Types of Electricity Meters, Instrument Transformers and Auxiliary Devices

[12/RSS102] RSS-102, Issue 2 (November 12, 2005)
using IEEE 1528 and/or IEEE C95.3 - Evaluation Procedure for Mobile and Portable Radio Transmiters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields

[12/RSS111a] RSS-111, Issue 2 (June 2007)
Broadband Public Safety Equipment

[12/RSS112] RSS-112, Issue 1 (February 2008)
Land Mobile and Fixed Equipment Operating in the Band 1670-1675 MHz

[12/RSS117] RSS-117, Issue 2 (March 30, 1974)
Land and Coast Station Transmitters Using A1, A2, A3, A2H or A3H Emissions Operating in the 200 - 535 kHz Band

[12/RSS118] RSS-118, Issue 2, Addendum & Amendment (August 19, 1990)
Land and Subscriber Stations: Voice, Data, and Tone Modulated, Angle Modulation Radiotelephone Transmitters and Receivers Operating in the Cellular Mobile Bands 824-849 MHz and 869-894 MHz

[12/RSS118a] RSS-118, Annex A (October 22, 1983)
Cellular System Mobile Station Land Station Compatibility Standard

[12/RSS118b] RSS-118, Addendum (September 1, 1990)

[12/RSS118c] RSS-118, Supplement 1993-1 (June 12 1993)

[12/RSS118d] RSS-118, Amendment #2, Issue 2, (August 24 1996)

[12/RSS119a] RSS-119, Issue 8 (September, 2006)
Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz

[12/RSS119b] RSS-119, Issue 9 (June 2007)
Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz

[12/RSS123] RSS-123, Issue 1, Rev. 2 (November 6, 1999)
Low Power Licensed Radiocommunication Devices

[12/RSS125] RSS-125 (March 25, 2000)
Land Mobile and Fixed Radio Transmitters and Receivers, 1.705 to 50.0 MHz, Primarily Amplitude Modulated

[12/RSS125a] RSS-125 Issue 2, Revision 1 (March 25, 2000)
Land Mobile and Fixed Radio Transmitters and Receivers, 1.705 to 50.0 MHz, Primarily Amplitude Modulated

[12/RSS128] RSS-128 (November 6, 1999)
800 MHz Dual-Mode TDMA Cellular Telephones

[12/RSS128a] RSS-128, Issue 2, Revision 1 (November 6, 1999)
800 MHz Dual-Mode TDMA Cellular Telephones

[12/RSS129] RSS-129, Issue 2 (September 25, 1999)
800 MHz Dual-Mode CDMA Cellular Telephones

[12/RSS129a] RSS-129, Issue 2 (September 25, 1999)
800 MHz Dual-Mode CDMA Cellular Telephones - (limited to TX conducted and radiated power and RX - TX radiated spurious emissions)

[12/RSS130] RSS-130, Issue 2 (January 23, 1993)
Digital Cordless Telephones in the Band 944 to 948.5 MHz

[12/RSS130a] RSS-130, Annex 1, Issue 2 (January 23, 1993) - CT2Plus Class
Specification for the Canadian Common Air Interface for Digital Cordless Telephony, Including Public Access Services

[12/RSS130b] RSS-130, Attachment 1 (January 23, 1993)
European Telecommunications Standards Institute Interim Standard #1-ETS300131 (April 1992) Radio Equipment and System Common Air Interface Specification to be Used for the Interworking between Cordless Telephone Apparatus 864.1 to 868.1 MHz

[12/RSS131] RSS-131, Issue 2 (July 2003)
Zone Enhancers for the Land Mobile Service

[12/RSS132] RSS-132, Issue 2 (September 2005)
Cellular Telephones Employing New Technologies Operating in the Bands 824 - 849 MHz and 869 - 894 MHz

[12/RSS133] RSS-133, Issue 3 (June 2005)
2GHz Personal Communications Services

[12/RSS133b] RSS-133, Issue 4 (February 2008)
2GHz Personal Communications Services

[12/RSS134] RSS-134, Issue 1, Rev. 1 (March 25, 2000)
900 MHz Narrowband Personal Communication Service

[12/RSS135] RSS-135, Issue 1 (October 26, 1996)
Digital Scanner Receivers

[12/RSS136] RSS-136, Issue 5 (October 2002)
Land and Mobile Station Radiotelephone Transmitters and Receivers Operating in the 26.960 - 27.410 MHz General Radio Service Band

[12/RSS137] RSS-137, Issue 1, Rev. 1 (September 25, 1999)
Location and Monitoring Service (902 - 928 MHz)

[12/RSS138] RSS-138, Issue 1 (February 7, 2004)
Commercial Shipborne Radar in the 2900 - 3100 MHz, 5470 - 5650 MHz and 9225 - 9500 MHz Bands

[12/RSS139] RSS-139, Isssue 1 (February 5, 2000)
Licensed Radiocommunications Devices in the Band 2400 - 2483.5 MHz

[12/RSS141] RSS-141, Issue 1, Revision 1 (February 7, 2004)
Aeronautical Radiocommunication Equipment in the Frequency Band 117.975 - 137 MHz

[12/RSS142] RSS-142, Issue 2 (August 2002)
Narrowband Multipoint Communication Systems in the 1,427 - 1,430 MHz and 1,493.5 - 1,496.5 MHz Bands

[12/RSS142a] RSS-142, Issue 3 (December 2007)
Narrowband Multipoint Communication Systems in the 1,427 - 1,430 MHz and 1,493.5 - 1,496.5 MHz Bands

[12/RSS170] RSS-170, Issue 1, Rev. 1 (November 6, 1999)
Satellite Mobile Earth Stations

[12/RSS181] RSS-181, Issue 1, (April 1, 1971) + Amendment (July 1987)
Coast and Ship Station Single Sideband Radiotelephone Transmitters and Receivers Operating in the 1,605 - 28,000 kHz Band

[12/RSS182] RSS-182, Issue 4 (2003)
Maritime Radio Transmitters and Receivers in the Band 156 - 162.5 MHz

[12/RSS188] RSS-188, Issue 1 (August 24, 1996)
Global Maritime Distress and Safety System (GMDSS)

[12/RSS191] RSS-191, Issue 2 (August 2002)
Local Multipoint Communication Systems in the 28 GHz Band; Point-to-Point and Point-to-Multipoint Broadband Communication Systems in the 24 GHz and 38 GHz Bands

[12/RSS191a] RSS-191, Issue 3 (April 2008)
Local Multipoint Communication Systems in the 28 GHz Band; Point-to-Point and Point-to-Multipoint Broadband Communication Systems in the 24 GHz and 38 GHz Bands

[12/RSS192] RSS-192, Issue 2 (2004)
Fixed Wireless Access Systems in the Band 3450 - 3650 MHz

[12/RSS192a] RSS-192, Issue 3 (January 2008)
Fixed Wireless Access Systems in the Band 3450 - 3650 MHz

[12/RSS193] RSS-193, Issue 1 (July 2003)
Multipoint and Point-to-Point Communication Systems (MCS) in the Fixed Service Operating in the 2,150 - 2,160 MHz, 2,500 - 2,596 MHz and 2,686 - 2,690 MHz Bands

[12/RSS194] RSS-194, Issue 1 (October 2007)
Fixed Wireless Access Equipment Operating in the Band 953-960 MHz

[12/RSS195] RSS-195, Issue 1 (January 2004)
Wireless Communications Service Equipment Operating in the Bands 2305 - 2320 MHz and 2345-2360 MHz

[12/RSS210] RSS-210, Issue 6 (Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment

[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment

[12/RSS212] RSS-212, Issue 1 (February 27, 1999)
Test Facilities and Test Methods for Radio Equipment

[12/RSS213] RSS-213, Issue 1 (April 24, 1999)
2 GHz Licence-Exempt Personal Communications Service Devices (PCS)

[12/RSS213a] RSS-213 Issue 2 (December 2005)
2 GHz Licence-Exempt Personal Communications Service Devices (PCS)

[12/RSS215] RSS-215, Issue 1 (November 6, 1999)
Analogue Scanner Receivers

[12/RSS243] RSS-243, Issue 2 (November 12, 2005)
Active Medical Implant Communications System Devices in the 402 - 405 MHz Band

[12/RSS287] RSS-287, Issue 1 (February 2007)
Emergency Position Indicating Radio Beacons (EPIRB), Emergency Locator Transmitters (ELT), Personal Locator Beacons (PLB), and Maritime Survivor Locator Devices (MSLD)

[12/RSS310] RSS-310, Issue 1 ( Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment

[12/RSS310a] RSS-310, Issue 2 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment

[12/RSSG2] RSS-Gen, Issue 2 (June 2007)
General Requirements and Information for the Certification of Radiocommunication Equipment

[12/RSSgen] RSS-Gen, Issue 1 (Sept. 2005)
General Requirements and Information for the Certification of Radiocommunication Equipment

  • Telecommunications Test Methods:

[12/300386a] EN 300 386 V1.2.1 (2000-03)
Electromagnetic compatibility and radio spectrum matter (ERM); Telecommunication network equipment; Electromagnetic Compatibility (EMC) requirements

[12/300386b] EN 300 386 V1.3.1 (2001-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/300386c] EN 300 386 V1.3.2 (2003-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/300386d] EN 300 386-2 V1.1.3 (1997-12)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements; Part 2: Product family standard

[12/300386f] ETSI EN 300 386 V1.3.3 (2005-04)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/50121b] EN 50121-4 (2000)
EMC Part 4 - Emission and Immunity of the Signaling Telecommunications Apparatus

[12/50121c] EN 50121-3-2 (2000)
EMC Part 3-2: Rolling Stock Apparatus

[12/50155] EN 50155 (2001)
Railway applications - Electronic equipment used on rolling stock

[12/50155a] EN 50155 (2001), A1 (2002)
Railway Applications - Electronic equipment used on rolling stock

[12/CS03a] Industry Canada CS-03, Issue 9, Amendment 1 (2005)
Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility

[12/FCC2a] TIA/EIA 603-C (2004) with 47 CFR Part 2
Personal Mobile Radio Services in 47 CFR Parts 22 (cellular), 24, 25, 26, and 27

[12/FCC2b] TIA/EIA 603-C (2004) with 47 CFR Part 2
General Mobile Radio Services in 47 CFR Parts 22 (non-cellular), 74, 90, 95, and 97

[12/FCC2c] TIA/EIA 603-C (2004) with 47 CFR Part 2
Maritime and Aviation Radio Services in 47 CFR Parts 80 and 87

[12/FCC2d2] TIA/EIA 603-C (2004) with 47 CFR Part 2
Microwave Radio Services in 47 CFR Parts 21, 27, 74, and 101

[12/GR1089] GR-1089-CORE, Issue 3 (October 2002)
Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment

[12/IDA37] IDA TS ADSL, Issue 1, (July 2005)
Technical Specification for Asymmetric Digital Subscriber Line (ADSL) Modems

[12/IDA39] IDA TS BISDN, Issue 1 (July 2005)
Technical Specifications for connecting to the Broadband Integrated Services Digital Network (BISDN)

[12/IDA40] IDA TS CM, Issue 1 (July 2005)
Technical Specification for Cable Modems (CM) connected to the Radio-Frequency Interface of the High-speed Data-Over-Cable Systems (DOCSIS 1.1)

[12/IDA41] IDA TS DLCN, Issue 1 (July 2005)
Technical Specification for Digital Interfaces based on hierarchical bit rates of 2048 kbit/s, 34 368 kbit/s and 139 264 kbit/s

[12/IDA42] IDA TS ISDN BA, Issue 1 (July 2005)
Technical Specification for connecting to the Integrated Services Digital Network (ISDN) using Basic Access

[12/IDA43] IDA TS ISDN PRA, Issue 1 (July 2005)
Technical Specification for connecting to the Integrated Services Digital Network (ISDN) using Primary Rate Access

[12/IDA44] IDA TS ISDN 3 (Oct. 2000)
Type Approval Specification for Network Termination 1 (NT1) for connection to the ISDN Basic Access interface

[12/IDA45] IDA TS PSTN, Issue 1 (July 2005)
Technical Specification for Terminal Equipment connecting to the Public Switched Telephone Network (PSTN)

[12/IDA46] IDA TS ACLIP, Issue 1 (July 2005)
Technical Specification for Analogue Calling Line Identification Presentation Facility for connection to Public Switched Telephone Network (PSTN)

[12/IDA47] IDA TS TLXN 1 (Dec. 1999)
Type Approval Specification for connection of Terminal Equipment to Telex Network (TLXN)

[12/S031] AS/ACIF S031 (2001)
Requirements for ISDN Basic Access Interface

[12/S038] AS/ACIF S038 (2001)
Requirements for ISDN Primary Rate Access Interface

[12/S040] AS/ACIF S040 (2001)
Requirements for Customer Equipment for use with the Standard Telephone Service - Features for special needs of persons with disabilities

[12/S043a] AS/ACIF S043.1 (2001)
Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 1: General

[12/S043b] AS/ACIF S043.2 (2001)
Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 2: Broadband

[12/S043c] AS/ACIF S043.3 (2003)
Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 3: DC, low frequency AC and voiceband

[12/S043d] AS/ACIF S043.1 (2003)
Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 1: General

[12/S043e] AS/ACIF S043.2 (2005)
Requirements for Customer Equipment for connection to a metallic local loop interface of a Telecommunications Network - Part 2: Broadband

[12/T01]
Terminal Equipment Network Protection Standards, FCC/ACTA Method - 47 CFR Part 68 - Analog and Digital

[12/T01a]
68.302 (Par. c,d,e,f) Environmental simulation; 68.304 Leakage current limit.; 68.306 Hazardous voltage limit.; 68.308 Signal power limit.; 68.310 Longitudinal balance limit.; 68.312 On-hook impedance limit.; 68.314 Billing protection

[12/T01b]
68.316 and 68.317 Hearing Aid Compatibility: technical standards

[12/T01c]
68.302 Environmental simulation (Par. a,b)

[12/T01d]
68.318 Consumer protection requirements

[12/T1TRQ6] T1.TRQ.6 (2001)
Technical Requirements for SHDSL, HDSL2, HDSL4, Digital Subscriber Line Terminal Equipment to Prevent Harm to the Telephone Network

[12/T42] AS/ACIF S002 (2001) + Amendment 1
Analogue Interworking and Non-Interference Requirements for Customer Equipment Connected to the Public Switched Telephone Network

[12/T43] AS/ACIF S003:2001
Customer Switching Systems Connected to the Public Switched Telephone Network

[12/T44] AS/ACIF S004 (2004)
Voice Frequency Performance Requirements for Customer Equipment

[12/T45] AS/ACIF S006 (2001)
Requirements for Customer Equipment, operating in the voiceband, for connection to the non-switched Telecommunications Network

[12/T46] AS/ACIF S008 (2001)
Requirements for Authorised Cabling Products

[12/T47] ACA TS-013
General Requirements for Customer Equipment Connected to ISDN Basic Access

[12/T48] ACA TS-014
General Requirements for Customer Equipment Connected to ISDN Primary Rate Access

[12/T49] AS/ACIF S016 (2001)
Requirements for Customer Equipment for connection to hierarchical digital interfaces

[12/TBR12] ETSI TBR 12 (December 1993) + A1 (January 1996)
Business TeleCommunications (BTC); Open Network Provision (ONP) technical requirements; 2,048 kbit/s digital unstructured leased line (D2048U); Attachment requirements for terminal equipment interface

[12/TBR13] ETSI TBR 013 (January 1996)
Business TeleCommunications (BTC); 2,048 kbits/s digital structured leased lines (D2048S); Attachment requirements for terminal equipment interface

[12/TBR21] ETSI TBR 21 (January 1998)
Terminal Equipment; Attachment requirements for pan-European approval for connection to the analogue PSTNs of TE (excluding TE supporting the voice telephony service) in which network addressing, if provided, is by means of DTMF signalling

[12/TBR38] ETSI TBR 38 (May 1998)
Public Switched Telephone Network; Attachment requirements for a terminal equipment incorporating an analogue handset function capable of supporting the justified case service when connected to the analogue interface of the PSTN in Europe

[12/TIA31B] TIA/EIA TSB-31-B (1998)
Part 68 Rational and Measurement Guidelines

[12/TIA968] ANSI/TIA-968-A (2003)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network

[12/TIA968a] ANSI/TIA-968-A-1 (2003)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 1

[12/TIA968b] ANSI/TIA-968-A-2 (2004)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 2

[12/TIA968c] ANSI/TIA-968-A-3 (2005)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 3

Return to NVLAP Program Listing


Return to top of page NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP Return to top of page

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: November 28, 2008

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA