Technology Services, National Voluntary Laboratory Accreditation Program, NIST Go to Technology Services Home Page Go to NIST Home Page Go to National Voluntary Laboratory Accreditation Program Home Page Go to Directory of Accredited Laboratories Go to Fields of Accreditation Go to Publications/Applications Go to Mutual Recognition Arrangements Go to Assessor Resources Contact National Voluntary Laboratory Accreditation Program

SGS U.S. Testing Company, Inc.

NVLAP Lab Code: 100416-0

Address and Contact Information:

1341 North 108th East Avenue
Tulsa, OK 74116-5637
Contact: Mr. Stephen Parkhurst
Phone: 918-437-8333
Fax: 918-437-8487
E-Mail: stephen.parkhurst@sgs.com
Send E-Mail to Laboratory: SGS U.S. Testing Company, Inc.
URL: www.us.sgs.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of October 8, 2008. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

Thermal Insulation Materials

Accreditation Valid From: January 22, 2008 Through: December 31, 2008

[01/ANOTE] Note:
All NVLAP-accredited test methods under the TIM Program apply only to thermal insulation materials or assemblies of materials used to provide resistance to heat flow, including any accessories, vapor retarders, and facings

  • Corrosiveness

[01/C01] ASTM C739 (Sec. 9)
Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation (Corrosiveness)

[01/C02] 16 CFR-Part 1209.5
Cellulose Insulation Test Procedures for Corrosiveness (Loose-Fill)

  • Flammability

[01/F08] 16 CFR-Part 1209.7
Smoldering Combustion (Smolder Box, Cellulosic Fiber)

[01/F10] ASTM C739 (Sec. 14)
Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation (Smoldering Combustion)

  • Mass, Density, and Dimensional Stability

[01/D24] ASTM C739 (Sec. 12)
Cellulosic Fiber Loose-Fill Thermal Insulation (Moisture Vapor Sorption)

[01/D26] 16 CFR-Part 1209.4
Settled Density (Specimen Container Cellulosic Fiber Loose-Fill)

[01/D27] ASTM C739 (Sec. 8)
Cellulosic Fiber Loose-Fill Thermal Insulation (Design Density)

  • Related Material Properties

[01/V04] ASTM E96
Water Vapor Transmission of Materials

[01/V05] ASTM C739 (Sec. 11)
Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation (Fungi Resistance)

  • Strength

[01/S15] ASTM C421
Tumbling Friability of Preformed Block-Type Thermal Insulation

Return to NVLAP Program Listing


Return to top of page NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP Return to top of page

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: October 8, 2008

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA