Intertek

NVLAP Lab Code: 100402-0

---

Address and Contact Information:

3933 U.S. Route 11
Cortland, NY 13045-0950
Contact: Mr. Terence O'Beirne
Phone: 607-758-6316
Fax: 607-753-1367
E-Mail: terence.obeirne@intertek.com
Send E-Mail to Laboratory: Intertek Testing Services NA Inc.
URL: http://www.intertek.com

---

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

---

Acoustical Testing Services

Accreditation Valid From: October 1, 2011 Through: September 30, 2012

[08/P03] ASTM C423
Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

[08/P06] ASTM E90
Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions

[08/P07] ASTM E492
Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

[08/P10] ANSI S12.31
Determination of Sound Power Levels of Broad-Band Noise Sources in Reverberation Rooms

[08/P11] ISO 3744
Determination of Sound Power Levels of Noise Sources - Engineering Methods for Free-Field Conditions Over a Reflecting Plane

[08/P13] ANSI S12.32
Determination of Sound Power Levels of Discrete-Frequency and Narrow-Band Noise Sources in Reverberation Rooms

[08/P31] ASTM E336
Measurement of Airborne Sound Insulation in Buildings

[08/P32] ASTM E1007
Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

[08/P36] ASTM E477
Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

[08/P46] ISO 3741
Determination of Sound Power Levels of Noise Sources - Precision Methods for Broad-Band Sources in Reverberation Rooms

[08/P59] ASTM E2179
Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors

[08/P60] ANSI S12.51
Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Precision Method for Reverberation Rooms

[08/P62] ANSI S12.54
Determination of Sound Power Levels of Noise Sources Using Sound Pressure - Engineering Method in an Essentially Free Field Over a Reflecting Plane

---

Energy Efficient Lighting Products

Accreditation Valid From: October 1, 2011 Through: September 30, 2012

• Color Measurements

[22/C02] IES LM-58:1994
Spectroradiometric Measurements

[22/C03] CIE Pub. 13.3:1995
Method of Measuring and Specifying Color Rendering of Light Sources

[22/C04] CIE Pub. 13.2:1974
Method of Measuring and Specifying Color Rendering of Light Sources

[22/S01] IES LM-58:1994
Spectroradiometric Measurements

[22/S02] CIE Pub. 13.3:1995
Method of Measuring and Specifying Color Rendering of Light Sources

[22/S03] IES LM-79:2008 (Sec. 12)
Solid State Lighting Luminaires - Color Characteristic Measurements

[22/S04] IES LM-16:1993
Practical Guide to Colorimetry of Light Sources

[22/S05] CIE Pub. 15:2004
Method of Measuring and Specifying Color Rendering of Light Sources

• Electrical Measurements

[22/E10] IES LM-9:1988
Fluorescent Lamps - Electrical Measurements

[22/E11] IES LM-9:1999
Fluorescent Lamps - Electrical Measurements

[22/E11a] IES LM-9:2009
Fluorescent Lamps - Electrical Measurements

[22/E12] IES LM-45:1991
Incandescent Lamps - Electrical Measurements

[22/E13] IES LM-45:2000
Incandescent Lamps - Electrical Measurements

[22/E13a] IES LM-45:2009
Incandescent Lamps - Electrical Measurements

[22/E14] IES LM-51:2000
High Intensity Discharge (HID) Lamps - Electrical Measurements

[22/E15] IES LM-66:1991
Single-Ended Compact Fluorescent Lamps - Electrical Measurements

[22/E16] IES LM-66:2000
Single-Ended Compact Fluorescent Lamps - Electrical Measurements

[22/E17] ANSI C78.375:1991
Fluorescent Lamps - Electrical Measurements

[22/E18] ANSI C78.375:1997
Fluorescent Lamps - Electrical Measurements

[22/E19] ANSI C78.386:1989
Mercury Lamps - Measurement of Characteristics

[22/E20] ANSI C78.387:1987
Metal-Halide Lamps - Measurement of Characteristics

[22/E21] ANSI C78.388:1990
High Pressure Sodium Lamps - Measurement of Characteristics

[22/E22] ANSI C78.389:2004
High Intensity Discharge Lamps - Methods of Measuring Characteristics

[22/E23] ANSI C78.5:1997
Compact Fluorescent Lamps - Run-up and Start-up Times

[22/E24] ANSI C78.5:2003
Compact Fluorescent Lamps - Run-up and Start-up Times

[22/E27] ANSI C82.6:2005
Ballast for High Intensity Discharge Lamps - Methods of Measurement

[22/S06] ANSI C82.2:2002
Ballast for Fluorescent Lamps - Methods of Measurement

[22/S07] ANSI C82.77:2002
Harmonic Emission Limits - Related Power Quality Requirements for Lighting Equipment

• Life Tests

[22/L05] IES LM-40:1987
Fluorescent Lamps - Life Test Performance

[22/L06] IES LM-40:2001
Fluorescent Lamps - Life Test Performance

[22/L07] IES LM-47:2001
High Intensity Discharge Lamps - Life Test Performance

[22/L08] IES LM-49:2001
Incandescent Filament Lamps - Life Test Performance

[22/L09] IES LM-65:1991
Single-Ended Compact Fluorescent Lamps - LifeTest Performance

[22/L10] IES LM-65:2001
Single-Ended Compact Fluorescent Lamps - LifeTest Performance

• Luminaires

[22/F06] IES LM-10:1996
Photometric Testing of Outdoor Fluorescent Luminaires

[22/F07] IES LM-31:1995
Photometric Testing of Roadway Luminaires

[22/F08] IES LM-35:2002
Photometric Testing of Floodlights Using Incandescent Filament or Discharge Lamps

[22/F09] IES LM-41:1998
Photometric Testing of Indoor Fluorescent Luminaires

[22/F10] IES LM-46:2004
Photometric Testing of Indoor Luminaires Using High Intensity Discharge or Incandescent Filament Lamps

• Photometric Measurements

[22/P06a] IES LM-9:1988
Fluorescent Lamps - Total Flux Measurements

[22/P06b] IES LM-9:1988
Fluorescent Lamps - Intensity Measurements

[22/P07a] IES LM-9:1999
Fluorescent Lamps - Total Flux Measurements

[22/P07b] IES LM-9:1999
Fluorescent Lamps - Intensity Measurements

[22/P07c] IES LM-9:2009
Fluorescent Lamps - Total Flux Measurements

[22/P07d] IES LM-9:2009
Fluorescent Lamps - Intensity Measurements

[22/P08a] IES LM-20:1994
Reflector Type Lamps -Total Flux Measurements

[22/P08b] IES LM-20:1994
Reflector Type Lamps - Intensity Measurements

[22/P09a] IES LM-45:1991
Incandescent Lamps - Total Flux Measurements

[22/P09b] IES LM-45:1991
Incandescent Lamps - Intensity Measurements

[22/P10a] IES LM-45:2000
Incandescent Lamps - Total Flux Measurements

[22/P10b] IES LM-45:2000
Incandescent Lamps - Intensity Measurements

[22/P10c] IES LM-45:2009
Incandescent Lamps - Total Flux Measurements

[22/P10d] IES LM-45:2009
Incandescent Lamps - Intensity Measurements

[22/P11a] IES LM-51:2000
High-Intensity Discharge Lamps -Total Flux Measurements

[22/P11b] IES LM-51:2000
High-Intensity Discharge Lamps - Intensity Measurements

[22/P12a] IES LM-66:1991
Single-Ended Compact Fluorescent Lamps - Total Flux Measurements

[22/P12b] IES LM-66:1991
Single-Ended Compact Fluorescent Lamps - Intensity Measurements

[22/P13a] IES LM-66:2000
Single-Ended Compact Fluorescent Lamps - Total Flux Measurements

[22/P13b] IES LM-66:2000
Single-Ended Compact Fluorescent Lamps - Intensity Measurements

[22/P14] EN/IEC 60969, Ed. 1.2: 2001
Self-Ballasted Lamps for General Lighting Services - Performance Requirements

[22/S09] IES LM-79:2008 (Sec. 9)
Solid State Lighting Luminaires - Total Flux Measurements (Luminous Efficacy)

[22/S10] IES LM-79:2008 (Sec. 10)
Solid State Lighting Luminaires - Luminous Intensity Measurements

Return to NVLAP Program Listing