Independent Materials Testing Laboratories, Inc.

NVLAP Lab Code: 100316-0

Address and Contact Information:

57 N. Washington Street
P.O. Box 745
Plainville, CT 06062-0745
Contact: Mr. David P. Aiudi
Phone: 860-747-1000
Fax: 860-747-6455
E-Mail: mail@imtlct.com
Send E-Mail to Laboratory: Independent Materials Testing Labs, Inc.
URL: http://www.imtlct.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

Construction Materials Testing

Accreditation Valid From: April 1, 2011 Through: March 31, 2012

Aggregates

[02/A03] ASTM C29
Unit Weight and Voids in Aggregates

[02/A04] ASTM C40
Organic Impurities in Fine Aggregate

[02/A05] ASTM C87
Effect of Organic Impurities in Fine Aggregates on Strength of Mortar

[02/A06] ASTM C88
Soundness of Aggregates by Use of Sodium Sulfate

[02/A07] ASTM C117
Materials Finer than No. 200 Sieve in Mineral Aggregates by Washing

[02/A08] ASTM C123
Lightweight Pieces in Aggregate

[02/A09] ASTM C127
Specific Gravity and Absorption of Coarse Aggregate

[02/A10] ASTM C128
Specific Gravity and Absorption of Fine Aggregate

[02/A11] ASTM C131
Resistance to Degradation of Small-Size Coarse Aggregate in the Los Angeles Machine

[02/A12] ASTM C136
Sieve Analysis of Fine and Coarse Aggregates

[02/A13] ASTM C142
Clay Lumps and Friable Particles in Aggregates

[02/A15] ASTM D75
Practice for Sampling Aggregates

[02/A44] ASTM C566
Total Moisture Content of Aggregate by Drying

[02/A46] ASTM C535
Resistance to Degradation of Large-Size Coarse Aggregate in the Los Angeles Machine

Cement

[02/A26] ASTM C191
Time of Setting of Hydraulic Cement by Vicat needle

[02/A31] ASTM C305
Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

[02/A51] ASTM C780 (Annex A7)
Compressive Strength of Molded Masonry Mortar Cylinders and Cubes

[02/A52] ASTM C1019
Sampling and Testing Grout

Concrete

[02/A01] ASTM C39
Compressive Strength of Cylindrical Specimens

[02/A02] ASTM C617
Capping Cylindrical Specimens

[02/A40] ASTM C78
Flexural Strength of Concrete Simple Beam with Third Point Loading

[02/A41] ASTM C192
Making and Curing Concrete Specimens in the Laboratory (requires C173, C231, C138, C143, C136, C127, C128, C566, C1064, C29, C40, C117)

[02/A43] ASTM C1064
Temperature of Freshly Mixed Portland Cement Concrete

[02/A45] ASTM C42
Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

[02/A53] ASTM C1231
Determination of Compressive Strength of Hardened Concrete Using Unbonded Caps

[02/G01] ASTM C31/C172/C143/C138/C231
Making and Curing Test Specimens/Sampling Freshly Mixed Concrete/Slump of Portland Cement Concrete/Unit Weight, Yield and Air Content/Air Content-Pressure Method

[02/G02] ASTM C173
Air Content-Volumetric Method

Road and Paving Materials

[02/M08] ASTM D979
Sampling Bituminous Paving Mixtures

[02/M11] ASTM D1188
Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens

[02/M19] ASTM D2172
Quantitative Extraction of Bitumen from Bituminous Paving Mixtures

[02/M24] ASTM D2041
Theoretical Maximum Density (Rice Method)

[02/M25] ASTM D2726
Bulk Density of Cores (SSD)

Soil and Rock

[02/L01] ASTM D4220
Preserving and Transporting Soil Samples

[02/L02] ASTM D422
Particle Size Analysis of Soils

[02/L04] ASTM D698
Moisture Density Relations of Soils and Soil-Aggregate Mixtures Using 5.5-lb Rammer and 12-inch Drop

[02/L05] ASTM D854
Specific Gravity of Soils

[02/L06] ASTM D1140
Amount of Material in Soils Finer Than the #200 Sieve

[02/L07] ASTM D1556
Density of Soil by the Sand Cone Method

[02/L08] ASTM D1557
Moisture Density Relations of Soils and Soil-Aggregate Mixtures Using 10-lb Rammer and 18-inch Drop

[02/L10] ASTM D1883
Bearing Ratio of Laboratory Compacted Soils

[02/L12] ASTM D2168
Calibration of Laboratory Mechanical Rammer Soil Compactors

[02/L13] ASTM D2216
Determination of Water (Moisture) Content of Soil, Rock, and Soil-Aggregate Mixtures

[02/L14] ASTM D2217
Wet Preparation of Soil Samples for Particle Size Analysis and Determination of Soil Const.

[02/L16] ASTM D2487
Classification of Soils for Engr. Purposes

[02/L17] ASTM D2488
Description and Identification of Soils (Visual-Manual)

[02/L20] ASTM D4318
Liquid Limit, Plastic Limit, and Plasticity Index of Soils

[02/L24] ASTM D2974
Moisture, Ash, and Organic Matter of Peat Material

[02/L31] ASTM D2167
Density of Soil in Place by the Rubber Balloon Method

[02/L60] ASTM D6938
In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

Standard Practices and Specifications

[02/A38] ASTM E329
Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction

[02/A39] ASTM C1077
Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation (requires ASTM C31, C39, C40, C117, C127, C128, C136, C138, C143, C172, C173)

[02/A50] ASTM C1093
Standard Practice for the Accreditation of Testing Agencies for Unit Masonry

[02/L32] ASTM D3740
Standard Practice for Minimum Requirement for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

[02/S07] ASTM E709
Standard Recommended Practice for Magnetic Particle Examination

[02/S08] ASTM E165
Standard Recommended Practice for Liquid Penetrant Inspection Method

Steel Materials

[02/S10] AWS D1.1, Sec. 6, Part F
Structural Welding Code-Steel: Sec. 6, Part F, Ultrasonic Testing

Return to NVLAP Program Listing