TUV SUD America, Inc.
NVLAP Lab Code: 100271-0
Address and Contact Information:
1775 Old Highway 8 NW, Suite 104New Brighton, MN 55112-1891
Contact: Mr. Stephen A. Lee
Phone: 978-573-2530
Fax: 978-977-0182
E-Mail: slee@tuvam.com
Send E-Mail to Laboratory: TUV SUD America, Inc.
URL: http://www.tuvamerica.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.Send E-Mail to NVLAP at: NVLAP@nist.gov
Electromagnetic Compatibility & Telecommunications
Accreditation Valid From: October 1, 2011 Through: September 30, 2012
- Emissions Test Methods
[12/11451b] ISO 11451-2 (2005)
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources
[12/11451d] ISO 11451-4 (2006)
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
[12/12895a] EN 12895 (2000)
Industrial trucks - Electromagnetic compatibility; (Immunity Testing Only)
[12/14982] EN ISO 14982 (1998)
Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982: 1998)
[12/160D21] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emission of Radio Frequency Energy
[12/160F21] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emissions of Radio Frequency Energy
[12/50366] EN 50366 (2003)
Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement
[12/50366a] EN 50366 (2006)
Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement
[12/55103a] EN 55103-1 (1996)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
[12/60E213] RTCA DO-160E
Section 21.3, RF Emissions, Conducted
[12/60E214] RTCA DO-160E
Section 21.4, RF Emissions, Radiated
[12/60F214] RTCA DO-160F
Section 21.4, RF Emissions, Conducted
[12/60F215] RTCA DO-160F
Section 21.5, RF Emissions, Radiated
[12/7637-3] ISO 7637-3, 1st Edition (1995-07-15)
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
[12/7637a] ISO 7637-1, 2nd Edition (2002-03-15)
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations
[12/7637b] ISO 7637-2, Second edition (2004)
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
[12/7637c] ISO 7637-3 (1995) Technical Corrigendum 1
Road vehicles - Electrical distrubance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
[12/7637d] ISO 7637-3 (2007)
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
[12/CIS12a] IEC/CISPR 12, Edition 5.1 (2005-04) and EN 55012 (2002), A1
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics
[12/CIS14a4] EN 55014-1 (2006)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS25a] EN 55025 (2003) and IEC/CISPR 25 (2002)
Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles
[12/EM02d] IEC 61000-3-2, Edition 2.2 (2004-11)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
[12/EM03b] IEC 61000-3-3, Edition 1.1(2002-03) & EN 61000-3-3, A1(2001)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections
[12/EM03i] IEC 61000-3-3 (2005), EN 61000-3-3 (1995) + A2 (2005)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections
[12/EM11en] EN 61000-3-11, 1st Ed (2000-08)
EMC - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems -Equipment with rated current <=75A and subject to conditional connection
[12/EM12a] IEC 61000-3-12 (2004) & EN 61000-3-12 (2005)
Electromagnetic Compatibility (EMC) - PART 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A
[12/FCC15c] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators
[12/FCC15c2] DA 00-705 - March 30, 2000 and KDB Pub. No. 558074
with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators - (Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems - and - New Guidance on Measurements for Digital Transmission Systems in Section 15.247)
[12/KN14] KN14 with RRL Notice No. 2004-69 (Sept. 22, 2004)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission
[12/KR127a] RRL Notice No. 2006-127 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Susceptibility
- General MIL Standards (Non 462)
[12/MS810f] MIL-STD-810 ver. F
Methods: 501.4, 502.4, 503.4, 505.4, 506.4, 507.4, 514.5, 515.5, and 516.5
- Immunity Test Methods
[12/10605] ISO 10605, First Edition (2001-12-15)
Road vehicles ? Test methods for electrical disturbances from electrostatic discharge.
[12/11452a] ISO 11452-1 (2005)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology
[12/11452b] ISO 11452-2 (2004)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
[12/11452d] ISO 11452-4 (2001)
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)
[12/11452f] ISO 11452-4 (2005)
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)
[12/160D15] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect
[12/160D16] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input
[12/160D17] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike
[12/160D18] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Susceptibility - Power Inputs
[12/160D19] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility
[12/160D20] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)
[12/160D22] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility
[12/160D25] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)
[12/160F15] RTCA/DO 160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect
[12/160F16] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input
[12/160F17] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike
[12/160F18] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Suspceptibility - Power Inputs
[12/160F19] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility
[12/160F20] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)
[12/160F22] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility
[12/160F25] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)
[12/501304a] EN 50130-4 (1995) + A1(1998) & A2(2003)
Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
[12/55103b] EN 55103-2 (1996)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity
[12/60E15] RTCA DO 160E
Section 15, Magnetic Effects
[12/60E16] RTCA DO160E
Section 16, Power Input
[12/60E17] RTCA DO-160E
Section 17, Voltage Spikes
[12/60E18] RTCA DO-160E
Section 18, Audio Frequency Conducted Susceptibility
[12/60E19] RTCA DO-160E
Section 19, Induced Signal Susceptibility
[12/60E204] RTCA DO-160E
Section 20.4, RF Susceptibility, Conducted
[12/60E205] RTCA DO-160E
Section 20.5, RF Susceptibility, Radiated
[12/60E22] RTCA DO-160E
Section 22, Lightning Induced Transient Susceptibility
[12/60E25] RTCA DO-160E
Section 25, Electrostatic Discharge (ESD)
[12/610006a] EN 61000-6-1 (2001)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments
[12/610006b] EN 61000-6-2 (2001)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/610006j] EN 61000-6-2 (2005)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/61000k] EN 61000-6-1 (2007)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments
[12/61326a1] EN 61326(1998) and IEC 61326(1997) + A1(1998) & A2(2001)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/61326a2] EN 61326 (1997), A1 (1998), A2 (2001), A3 (2003)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/CIS14i2] EN 55014-2 (1997) + A1 (2001)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard
[12/CIS14j] IEC/CISPR 14-2 (2001) Ed. 4 and EN 55014-2
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
[12/CIS24] IEC/CISPR 24 (1997) A2(2002) & EN 55024 (1998) A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/CIS24e] IEC/CISPR 24 (1997) and EN 55024 (1998) + A1(2001), A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/I01] IEC 61000-4-2, Ed. 1.2 (2001); EN 61000-4-2
Electrostatic Discharge Immunity Test
[12/I02] IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002)
Radiated Radio-Frequency Electromagnetic Field Immunity Test
[12/I02g] IEC 61000-4-3, Ed. 3.0 (2006-02)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I03] IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I04aa] IEC 61000-4-5, Ed. 2.0 (2005-11); EN 61000-4-5
Electromagnetic Compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I05ee] IEC 61000-4-6, Ed. 2.2 (2006-05)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/I07c] IEC 61000-4-11, Ed. 2 (2004-03) & EN 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
[12/I12a] IEC 61000-4-12, 2nd edition (2006-09)
EMC - Part 4-12: Testing and measurement techniques - Ring wave immunity test
[12/IEC409] IEC 61000-4-9, Ed 1.1 (2001-03)
EMC - Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test
[12/IEC414] IEC 61000-4-14, Edition 1.1 (2002-07)
EMC - Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test
[12/IEC416] IEC 61000-4-16, Edition 1.1 (2002-07)
EMC - Part 4-16: Testing and Measurement Techniques - Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz
[12/IEC417] IEC 61000-4-17, Edition 1.1 (2002-07)
EMC - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test
[12/IEC428] IEC 61000-4-28, Edition 1.1 (2002-07)
EMC - Part 4-28: Testing and Measurement Techniques - Variation of Power Frequency, Immunity Test
[12/J111301] SAE J1113/1 (2006-10)
Procedures and Limits for Components of Vehicles, Boats, and Machines (except Aircraft)
[12/J111302] SAE J1113-2 (1996-09)
Electromagnetic compatibility measurement procedures and limits for vehicle components (except aircraft) - Conducted immunity, 30 Hz to 250 kHz - all leads
[12/J111303] SAE J1113-3 (2006-09)
Direct Injection of Radio Frequency Power
[12/J111304] SAE J1113-4 (2004-08)
Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method
[12/J111311] SAE J1113-11 (2006-01)
Immunity to Conducted Transients on Power Leads
[12/J111312] SAE J1113-12 (2006-08)
Electrical Interference by Conduction and Coupling
[12/J111313] SAE J1113-13 (2004-11)
Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 - Immunity to Electrostatic Discharge
[12/J111322] SAE J1113-22 (2003-11)
Immunity Radiated Magnetic Fields
[12/J1113a] SAE J1113-21 (2005-10)
Immunity to Electromagnetic Fields, Absorber Lined Chamber
[12/J1113c] SAE J1113-41 (2006-09)
Radio Disturbance Characteristics for the Protection of Receivers Used on Board Vehicles
[12/KN11] KN 61000-4-11 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/KN11g] KN 61000-4-11 with RRL Notice No. 2006-127 (Dec 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference
[12/KN2a] KN 61000-4-2 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electrostatic Discharge Immunity Test
[12/KN2d] KN 61000-4-2 (Annex 1);RRL Notice No. 2007-70
Electrostatic Discharge Immunity Test
[12/KN3a] KN 61000-4-3 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Radiated, radio-frequency, electromagnetic field immunity test
[12/KN3d] KN 61000-4-3 with RRL Notice No. 2006-127 (Dec 29, 2006)
Radiated, radio-frequency, electromagnetic field immunity test
[12/KN4a] KN 61000-4-4 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun
[12/KN4d] KN 61000-4-4 with RRL Notice No. 2006-127 (Dec 29, 2006)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun
[12/KN5a] KN 61000-4-5 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Surge Immunity Test
[12/KN5d] KN 61000-4-5 with RRL Notice No. 2006-127 (Dec 29, 2006)
Surge Immunity Test
[12/KN6a] KN 61000-4-6 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances,
[12/KN6d] KN 61000-4-6 with RRL Notice No. 2006-127 (Dec 29, 2006)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/KN8a] KN 61000-4-8 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Power Frequency Magnetic Field Immunity Test
[12/KN8d] KN 61000-4-8 with RRL Notice No. 2006-127 (Dec 29, 2006)
Power Frequency Magnetic Field Immunity Test
[12/PC69] ANSI/AAMI PC69:2000
Active implantable medical devices - Electromagnetic compatibility: EMC test Protocols for Implatable cardiac pacemakers and implantable cardioverter devibrillators, 1 ed.
[12/PC69a] ANSI/AAMI PC69:2007; (Sections 4.8 and 4.9 only)
Active implantable medical devices - Electromagnetic compatibility: EMC test Protocols for Implatable cardiac pacemakers and implantable cardioverter devibrillators
- MIL-STD-462 : Conducted Emissions
[12/A01]
MIL-STD-462 Method CE01
[12/A04]
MIL-STD-462 Method CE02
[12/A06]
MIL-STD-462 Method CE03
[12/A08]
MIL-STD-462 Method CE04
[12/A12]
MIL-STD-462 Method CE07
[12/A13]
MIL-STD-462 Version D Method CE101
[12/A14]
MIL-STD-462 Version D Method CE102
[12/A15]
MIL-STD-462 Version D Method CE106
[12/A16]
MIL-STD-461 Version E Method CE101
[12/A17]
MIL-STD-461 Version E Method CE102
[12/A18]
MIL-STD-461 Version E Method CE106
[12/A19]
MIL-STD-461 Version F Method CE101
[12/A20]
MIL-STD-461 Version F Method CE102
[12/A21]
MIL-STD-461 Version F Method CE106
- MIL-STD-462 : Conducted Susceptibility
[12/B01]
MIL-STD-462 Method CS01
[12/B02]
MIL-STD-462 Method CS02
[12/B05]
MIL-STD-462 Method CS06
[12/B07]
MIL-STD-462 Method CS09
[12/B12]
MIL-STD-462 Version D Method CS101
[12/B16]
MIL-STD-462 Version D Method CS109
[12/B17]
MIL-STD-462 Version D Method CS114
[12/B18]
MIL-STD-462 Version D Method CS115
[12/B19]
MIL-STD-462 Version D Method CS116
[12/B20]
MIL-STD-461 Version E Method CS101
[12/B21]
MIL-STD-461 Version E Method CS103
[12/B22]
MIL-STD-461 Version E Method CS104
[12/B24]
MIL-STD-461 Version E Method CS109
[12/B25]
MIL-STD-461 Version E Method CS114
[12/B26]
MIL-STD-461 Version E Method CS115
[12/B27]
MIL-STD-461 Version E Method CS116
[12/B28]
MIL-STD-461 Version F Method CS101
[12/B29]
MIL-STD-461 Version F Method CS103
[12/B30]
MIL-STD-461 Version F Method CS104
[12/B33]
MIL-STD-461 Version F Method CS109
[12/B34]
MIL-STD-461 Version F Method CS114
[12/B35]
MIL-STD-461 Version F Method CS115
[12/B36]
MIL-STD-461 Version F Method CS116
- MIL-STD-462 : Radiated Emissions
[12/D01]
MIL-STD-462 Method RE01
[12/D02]
MIL-STD-462 Method RE02
[12/D04]
MIL-STD-462 Version D Method RE101
[12/D05]
MIL-STD-462 Version D Method RE102
[12/D07]
MIL-STD-461 Version E Method RE101
[12/D08]
MIL-STD-461 Version E Method RE102
[12/D09]
MIL-STD-461 Version E Method RE103
[12/D10]
MIL-STD-461 Version F Method RE101
[12/D11]
MIL-STD-461 Version F Method RE102
- MIL-STD-462 : Radiated Susceptibility
[12/E01]
MIL-STD-462 Method RS01
[12/E02]
MIL-STD-462 Method RS02
[12/E03]
MIL-STD-462 Method RS03 (Consult laboratory for field strengths available)
[12/E04]
MIL-STD-462 Method RS03 employing RADHAZ procedures for high level testing (Consult laboratory for field strengths available)
[12/E07]
MIL-STD-462 Method RS06
[12/E08]
MIL-STD-462 Version D Method RS101
[12/E09]
MIL-STD-462 Version D Method RS103
[12/E11]
MIL-STD-461 Version E Method RS101
[12/E12]
MIL-STD-461 Version E Method RS103
[12/E15]
MIL-STD-461 Version F Method RS101
[12/E16]
MIL-STD-461 Version F Method RS103
- Product Safety Test Methods
[12/60601aa] IEC 60601-1-2, Ed 2.1 (2004-11) & EN 60601-1-2 (2002)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
[12/60601tt] EN 60601-2-24 (1998); (Section 36 only)
Medical electronic equipment Part 2-24: Particular requirements for the safety of infusion pumps and controllers
[12/C121a] ANSI C12.1 (2001); (Section 4.7.3.12.1 only)
Electric Meters Code for Electricity Metering
[12/T41a] AS/NZS 60950 (2000)
Safety of Information Technology Equipment (including Amdt1)
[12/T41b] IEC 60950 (1994-04), 3rd edition
Safety of information technology equipment
[12/T41c] EN 60950 (1992) and BS 7002 (1992)
Safety of information technology equipment, including electrical business equipment
[12/T41d] ANSI/UL 60950-2000 and CAN/CSA-C22.22 No. 60950-00
Safety of Information Technology Equipment
[12/T41e] EN 60950-1, IEC 60950-1 & UL 60950-1 (1st edition): (2001)
Information technology equipment - Safety - Part 1: General requirements
[12/T41f] ANSI/UL 60950-1 (2003) and CAN/CSA 22.2 No. 60950-1
Safety of Information Technology Equipment
[12/T41g] EN 60950 (2000)
Safety of information technology equipment
[12/T41h] UL 60950-1 (2003)
Safety- Part 1- General Requirements For Information Technology Equipment
[12/T41i] EN 60950-1 (2006), IEC 60950-1 (2005) & UL 60950-1
Information technology equipment - Safety - Part 1: General requirements
[12/T50] AS/NZS 3260 (1993) + Supplement 1 (1996)
Safety of Information Technology Equipment Including Electrical Business Equipment
[12/T50a] AS/NZ 60950 (2000)
Safety of information technology equipment
[12/T50b] AS/NZS 60950.1 (2003)
Information technology equipment - Safety - Part 1: General requirements (IEC 60950-1: 2001, MOD)
[12/T50c] AS/NZS 60950.1 (2003) + A1 (2006)
Information technology equipment - Safety - Part 1: General Requirements
- Radio Test Methods
[12/300220c] EN 300 220-3 V1.1.1 (2000-09)
ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
[12/300330d] ETSI EN 300 330-2 V1.3.1 (2006-04)
ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive
[12/300440c] ETSI EN 300 440-2 v1.1.2 (2004-07)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
[12/301489b] ETSI EN 301 489-3 v1.4.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz
[12/301489m] ETSI EN 301 489-17 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
[12/301489z] ETSI EN 301 489-1 v1.6.1 (2005-09)
ERM; ElectroMagnetic Compatability (EMC) Standard for Radio Equipment and Services; Common Technical Requirements
[12/AS4268c] AS/NZS 4268 (2003) + A1 (2005)
Radio Equipment and Systems - Short Range Devices - Limits and Methods of Measurement
[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment
Return to NVLAP Program Listing