DL Labs, Inc.NVLAP Lab Code: 100252-0
Address and Contact Information:
74 Kent Street
Brooklyn, NY 11222-1517
Contact: Mr. Thomas J. Sliva
Phone: 718-383-5080
Fax: 718-383-7445
E-Mail: dllabs@aol.com
Send E-Mail to Laboratory: DL Labs, Inc.
URL: http://www.dllabs.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of October 8, 2008. For additional information, contact NVLAP at (301) 975-4016.
Send E-Mail to NVLAP at: NVLAP@nist.gov
Commercial Products Testing
Accreditation Valid From: January 1, 2008 Through: December 31, 2008
- Building Seals and Sealants
[13/O01] ASTM C510
Staining and Color Change of Single- or Multicomponent Joint Sealants
[13/O03] ASTM C639
Rheological (Flow) Properties of Elastomeric Sealants
[13/O04a] ASTM C661
Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
[13/O05a] ASTM C679
Tack-Free Time of Elastomeric Sealants
[13/O11a] ASTM C719
Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
[13/O12] ASTM C731
Extrudability, After Package Aging, of Latex Sealants
[13/O13] ASTM C732
Aging Effects of Artificial Weathering on Latex Sealing Compounds
[13/O15] ASTM C734
Low-Temperature Flexibility of Latex Sealing Compounds After Artificial Weathering
[13/O16] ASTM C736
Extension-Recovery and Adhesion of Latex Sealants
[13/O20] ASTM C793
Effects of Accelerated Weathering on Elastomeric Joint Sealants
[13/O21] ASTM C794
Adhesion-in-Peel of Elastomeric Joint Sealants
[13/O23] ASTM D2202
Slump of Sealants
[13/O24] ASTM D2203
Staining from Sealants
[13/O26] ASTM D2377
Tack-Free Time of Caulking Compounds and Sealants
[13/O37] ASTM C920
Specification for Elastomeric Joint Sealants
[13/O38] ASTM C1241
Volume Shrinkage of Latex Sealants During Cure
[13/O39] ASTM C1183
Extrusion Rate of Elastomeric Sealants
[13/O40] ASTM C1246
Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
[13/O45] ASTM C834
Specification for Latex Sealants
[13/O46] ASTM C1523
Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- Paints and Related Coatings and Materials
[09/A01] ASTM D56
Flash Point by Tag Closed Tester
[09/A02] ASTM D93 (Method A)
Flash Point by Pensky-Martens Closed Tester
[09/A04] ASTM D185
Coarse Particles in Pigments, Pastes and Paints
[09/A05] ASTM D281
Oil Absorption of Pigments by Spatula Rub-Out
[09/A07] ASTM D523
Specular Gloss
[09/A08] ASTM D562
Consistency of Paints Using the Stormer Viscometer
[09/A09] ASTM D1005
Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
[09/A12] ASTM D1210
Fineness of Dispersion of Pigment-Vehicle Systems
[09/A13] ASTM D1212 (Method A)
Wet Film Thickness of Organic Coatings
[09/A15] ASTM D1310
Flash Point and Fire Points of Liquids by Tag Open-Cup Apparatus
[09/A17] ASTM D1475
Density of Paint, Varnish, Lacquer, and Related Products
[09/A21] ASTM D3278
Flash Point of Liquids by Setaflash-Closed-Cup Apparatus
[09/A22] ASTM D3363
Film Hardness by Pencil Test
[09/A23] ASTM D3793
Low-Temperature Coalescence of Latex Paint Films
[09/A25] ASTM D4212
Viscosity by Dip-Type Viscosity Cups
[09/A26] ASTM E1347
Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
[09/A28] ASTM E313
Indexes of Whiteness and Yellowness of Near-White Opaque Materials
[09/A53] ASTM E96
Water Vapor Transmission of Materials
[09/B09] ASTM D711
No-Pick-Up Time of Traffic Paint
[09/B13a] ASTM D968
Abrasion Resistance of Organic Coatings by Falling Abrasive
[09/B19a] ASTM D1308
Effect of Household Chemicals on Clear and Pigmented Organic Finishes
[09/B23] ASTM D1640
Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
[09/B24] ASTM D522
Mandrel Bend Test of Attached Organic Coatings
[09/B25] ASTM D2197
Adhesion of Organic Coatings by Scrape Adhesion
[09/B29] ASTM D2486
Scrub Resistance of Interior Latex Flat Wall Paints
[09/B31] ASTM D2805
Hiding Power of Paints by Reflectometry
[09/B32] ASTM D3273
Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
[09/B33] ASTM D3274
Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
[09/B34] ASTM D3450
Washability Properties of Interior Architectural Coatings
[09/B37] ASTM D4060
Abrasion Resistance of Organic Coatings by the Taber Abraser
[09/B38] ASTM D4062
Leveling of Paints by Draw-Down Method
[09/B43] ASTM D3359
Measuring Adhesion by Tape Test
[09/B44] ASTM D4828
Practical Washability of Organic Coatings
[09/B62] ASTM D1653
Methods for Water Vapor Transmission of Organic Coating Films
[09/B63] ASTM D2134
Determining Hardness of Organic Coatings with a Sward-Type Hardness Rocker
[09/B64] ASTM D2370
Tensile Properties of Organic Coatings
[09/B65] ASTM D3258
Porosity of Paint Films
[09/B66] ASTM D3806
Small-Scale Evaluation of Fire-Retardant Paints (2-ft Tunnel Method)
[09/B67] ASTM D4400
Methods for Sag Resistance of Paints Using a Multinotch Applicator
[09/B68] ASTM D4541
Pull-Off Strength of Coatings Using Portable Adhesion Testers
[09/B69] ASTM D4707
Measurement of Paint Spatter Resistance to Roller Application
[09/B70] ASTM D4946
Blocking Resistance of Architectural Paints
[09/B71] ASTM D2794
Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
[09/C26a] ASTM D2369
Volatile Content of Coatings
[09/C27] ASTM D2371
Pigment Content of Solvent-Reducible Paints
[09/C28] ASTM D2697
Volume Nonvolatile Matter in Clear or Pigmented Coatings
[09/C29] ASTM D2698
Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
[09/C37] ASTM D3723
Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
[09/C39] ASTM D3960
Volatile Organic Compound (VOC) Content of Paints and Related Coatings
[09/C40] ASTM D4017
Water in Paints and Paint Materials by Karl Fischer Method
[09/C44] ASTM D5095
Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
[09/D01] ASTM B117
Operating Salt Spray (Fog) Testing Apparatus
[09/D16a] ASTM G154
Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
[09/D17] ASTM D4446
Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
[09/D19] ASTM D6904
Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
[09/D20] ASTM D7088
Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
[15/A25] ASTM D624
Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
[15/A26] ASTM D2240
Rubber Property - Durometer Hardness
Return to NVLAP Program Listing
NVLAP Home |
Accredited Laboratories |
Fields of Accreditation |
Publications/Applications |
Mutual Recognition Arrangements |
Assessor Resources |
Contact NVLAP 
For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:
National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov
Date created: July 26, 2002
Last Updated: October 8, 2008
Privacy
Statement / Security Notice / Accessibility Statement | Disclaimer
| FOIA
|