Northwest EMC- Minnesota Lab
NVLAP Lab Code: 200881-0
Address and Contact Information:
9349 W. Broadway AvenueBrooklyn Park, MN 55445
Contact: Ms. Vicki Albertson
Phone: 503-844-4066
Fax: 503-844-3826
E-Mail: valbertson@nwemc.com
Send E-Mail to Laboratory: Northwest EMC, Inc.
URL: http://www.nwemc.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.Send E-Mail to NVLAP at: NVLAP@nist.gov
Electromagnetic Compatibility & Telecommunications
Accreditation Valid From: October 1, 2011 Through: September 30, 2012
- Emissions Test Methods
[12/55012a] EN 55012 :2007
Vehicles, boats and internal combustion engines ? Radio disturbance characteristics ? Limits and methods of measurement for the protection of off-board receivers
[12/55103a] EN 55103-1 (1996)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
[12/55103f] EN 55103-1 (2009)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
[12/610006m] EN 61000-6-4 (2007)
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments
[12/610006p] IEC 61000-6-3 (2006-06)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
[12/61000g] EN 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments
[12/61326a5] BS EN 61326-2-2 (2006-06)
EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
[12/61326a6] EN 61326-2-1 (2006-05)
EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for EMC unprotected applications
[12/61326a7] EN 61326-2-3 (2006-08)
EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
[12/C6310] ANSI C63.10-2009
American National Standard for Testing Unlicensed Wireless Devices
[12/CIS11ii] IEC/CISPR 11, Ed. 4.1 (2004-06) + A2 (2006)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11jj] EN 55011 (2007) + A2 (2007)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11m1] EN 55011:2009
[12/CIS11p] IEC/CISPR 11 Ed. 5 (2009-05)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[12/CIS11pp] IEC/CISPR 11 Ed 5 (2009-05) + A1 (2010)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[12/CIS12d] CISPR 12 (2007)
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics
[12/CIS14a4] EN 55014-1 (2006)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14x1] IEC/CISPR 14-1, Ed. 5.0 (2005)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission
[12/CIS22L] EN 55022 (2006) + A1 (2007)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22c4] EN 55022 (1998) + A1(2000) + A2(2003)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22c5] IEC/CISPR 22, Edition 5 (2005) + A1(2005) + A2 (2006)
Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement
[12/CIS22f] CNS 13438 (2006) (up to 6GHz)
LImits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
[12/CIS22k] IEC/CISPR 22 (2008-09)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/EM02i] IEC 61000-3-2, Ed. 3.0 (2005-11)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)
[12/EM02ii] IEC 61000-3-2, Ed. 3.0 (2005) +A1 (2008) +A2 (2009)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)
[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
[12/EM03h] IEC/EN 61000-3-3 (1995) + A1 (2001) + A2 (2005)
Conducted Emissions, Voltage Flicker
[12/EM03n] IEC 61000-3-3 Ed. 2.0 (2008)
EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current =16 A per phase and not subject to conditional connection
[12/F18] FCC OST/MP-5 (1986)
FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment)
[12/FCC11a] ANSI C63.4 (2009) with FCC Method - 47 Part 11.
Emergency Alert System (EAS)
[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators
[12/FCC15bb] ANSI C63.4 (2009) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators
[12/FCC15c] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators
[12/FCC15cc] ANSI C63.4 (2009) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators
[12/FCC15cz] SS - MP with FCC Method - 15 CFR Part 15, Subpart C
Intentional Radiators
[12/FCC15e] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Service Devices
[12/FCC15ee] ANSI C63.4 (2009) with FCC Method 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Service Devices
[12/FCC15ez] UNII - MP with FCC Method - 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Services Devices
[12/ICES001] ICES-001
Industrial, Scientific and Medical (ISM) Radio Frequency Generators
[12/ICES003] ICES-003 Issue 4 (2004)
Implementation and Interpretation of the Interference-Causing Equipment Standard for Digital Apparatus. (Industry Canada)
[12/ICES05a] ICES-005 Issue 3 (May 2009)
Radio Frequency Lighting Devices
[12/ICES06a] ICES-006 Issue 2 (2009)
[12/KCC0839] KCC Notice 2008-39
Korea Technical Requirements Electromagnetic Interference (EMI)
[12/KN11d1] KN11 (Annex 3) with RRA Announce 2008-11 (Dec. 16, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3)
[12/KN11d2] KN11 (Annex 3) with RRA Announce 2010-05 (Dec. 24, 2010)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3)
[12/KN14d] KN 14-1 (2008-5) with RRL Notice No. 2010-05 (Dec 24, 2010)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Emission
[12/KN16] Korea RRA Notice No. 2008-11 (Dec. 16, 2008)
Conformity Assessment Procedures for Electromagnetic Interference using KN 16-1-1, KN 16-1-2, KN 16-1-3, KN 16-1-4, KN 16-1-5, KN 16-2-1, KN 16-2-2, KN 16-2-3, KN 16-2-4 (2008-05)
[12/KN16a] RRA Notification 2010-05, K only (Dec. 24, 2010)
Conformity Assessment Procedures for Electromagnetic Interference using KN 16-1-1, KN 16-1-2, KN 16-1-3, KN 16-1-4, KN 16-1-5, KN 16-2-1, KN 16-2-2, KN 16-2-3, KN 16-2-4 (2008-05)
[12/KN22d1] KN22 (Annex 8) with RRA Announce 2008-11 (Dec. 16, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)
[12/KN22d2] KN22 (Annex 8) with RRA Announce 2009-9 (Dec. 21, 2009)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)
[12/RRA1118] RRA Public Notification 2011-18, K only (July 5, 2011)
Technical Requirements for Electromagnetic Interference (K only)
[12/T51b] AS/NZS CISPR 22, 3rd Edition (2006)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/T51b1] AS/NZS CISPR 22 (2009)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/VCCIg] Agreement of VCCI V-3 (2011.04)
Agreement of VCCI Council - Technical Requirements: V-3/2011.04 (including radiated disturbance above 1 GHz)
- Immunity Test Methods
[12/501304a] EN 50130-4 (1995) + A1(1998) & A2(2003)
Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
[12/55103b] EN 55103-2 (1996)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity
[12/55103e] EN 55103-2 (2009)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity
[12/60601ad] KN 60601-1-2 (Annex 12) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Medical Electrical Equipment)
[12/60601ae] KN 60601-1-2 (Annex 2), RRA 2010-6, K only (Dec 24, 2010)
Conformity Assessment Procedure for Electromagnetic Susceptibility
[12/610006i] IEC 61000-6-2, Edition 2.0 (2005-01)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/610006j] EN 61000-6-2 (2005)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/61000k] EN 61000-6-1 (2007)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments
[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/CIS14j] IEC/CISPR 14-2 (2001) Ed. 4 and EN 55014-2
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
[12/CIS20c] EN 55020 (2007-01)
Sound and television broadcast receivers and associated equipment - immunity characteristics - Limits and methods of measurement
[12/CIS20e] IEC/CISPR 20 (2006)
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
[12/CIS24e] IEC/CISPR 24 (1997) and EN 55024 (1998) + A1(2001), A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/I01d] IEC 61000-4-2, Ed. 2.0 (2008-12)
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
[12/I02ggg] IEC 61000-4-3, Ed. 3.0 (2006-02) + A1 (2007) + A2 (2010)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I02i] IEC 61000-4-3, Ed. 3.1 (2008-04)
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I03g] IEC 61000-4-4, Ed. 2.0 + A1 (2010)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/I04c] IEC 61000-4-5, Ed 1.1 (2005-11)
EMC - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I05f1] IEC 61000-4-6 Ed. 3.0 (2008)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[12/I06e] IEC 61000-4-8 (2009)
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[12/I07c] IEC 61000-4-11, Ed. 2 (2004-03) & EN 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
[12/KCC0838] KCC Notice 2008-38
Korea Technical Requirements for Electromagnetic Susceptability (EMS)
[12/KN11f1] KN 61000-4-11 (Annex 7) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Voltage Dips, Short Interruptions and Voltage Variations Immunity tests)
[12/KN11h] KN 61000-4-11 (Annex 1-7) RRA Announce 2010-6 (Dec.24, 2010)
Conformity Assessment Procedure for EMS (Voltage Dips, Short Interruptions and Voltage Variations Immunity tests)
[12/KN24d1] KN 24 (Annex 11) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Information technology equipment ? Immunity characteristics ? Limits and methods of measurement)
[12/KN24e] KN 24 (Annex 5) with RRA Announce 2010-6 (Dec. 24, 2010)
Conformity Assessment Procedure for EMS (Information technology equipment – Immunity characteristics – Limits and methods of measurement)
[12/KN2d1] KN 61000-4-2 (Annex 1); RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Precedure for EMS (Electrostatic Discharge Immunity Test)
[12/KN2e] KN 61000-4-2 (Annex 1-1) RRA Announce 2010-6 (Dec. 24, 2010)
Conformity Assessment Procedure for EMS (Electrostatic Discharge Immunity Test)
[12/KN3c1] KN 61000-4-3 (Annex 2) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Radiated, radio-frequency, electromagnetic field immunity test)
[12/KN3e] KN 61000-4-3 (Annex 1-2) RRA Announce 2010-6 (Dec. 24, 2010)
Radiated, radio-frequency, electromagnetic field immunity test
[12/KN4] KN 61000-4-4 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/KN4c1] KN 61000-4-4 (Annex 3) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Electrical Fast Transient/Burst test)
[12/KN4e] KN 61000-4-4 (Annex 1-3) RRA Announce 2010-6 (Dec. 24, 2010)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/KN5c1] KN 61000-4-5 (Annex 4) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Surge Immunity Test)
[12/KN5e] KN 61000-4-5 (Annex 1-4) RRA Announce 2010-6 (Dec. 24, 2010)
Conformity Assessment Procedure for EMS (Surge Immunity Test)
[12/KN6c1] KN 61000-4-6 (Annex 5); RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Conducted disturbances, induced by radio-frequency fields test)
[12/KN6e] KN 61000-4-6 (Annex 1-5) RRA Announce 2010-6 (Dec. 24, 2010)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/KN8c1] KN 61000-4-8 (Annex 6) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Power Frequency Magnetic Field Immunity Test)
[12/KN8e] KN 61000-4-8 (Annex 1-6) RRA Announce 2010-6 (Dec. 24, 2010)
Conformity Assessment Procedure for EMS (Power Frequency Magnetic Field Immunity Test)
[12/RRA0812] RRA Notice 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for Electronic Susceptibility (K only)
[12/RRA1117] RRA Public Notification 2011-17, K only (July 5, 2011)
Technical Requirements for Electromagnetic Susceptibility, K only
- Product Safety Test Methods
[12/60601ab] IEC 60601-1-2, Ed. 3.0 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
[12/60601y] IEC 60601-2-26 (2003); EN 60601-2-26 (2003)
Medical Electrical Equipment Part 2-26: Particular Requirements for the Safety of Electroencephalographs
[12/60601yy] IEC 60601-2-26, Ed. 2.0 (2002-11)
Medical Electrical Equipment Part 2-26: Particular Requirements for the Safety of Electroencephalographs
- RF Exposure Test Methods
[12/RRA0110] KCC Public Notification 2011-10, K only (Jan. 26, 2011)
Equipment to be subject of Test Procedure for Electromagnetic Field Strength and Specific Absorption Rate (SAR)
- Radio Test Methods
[12/300220h] ETSI EN 300 220-2 V2.3.1 (2010-02)
ERM; Short Range Devices (SRD), Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW, Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
[12/300220i] ETSI EN 300 220-1 V2.3.1 (2010-02)
Electromagnetic Compatibility Radio Spectrum Matters; Short Range Devices; Radio Equipment to be used in the 25 MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 500mW; Part 1: Technical Characteristics and Test Methods
[12/300328g] ETSI EN 300 328 V1.7.1 (2006-10)
ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
[12/300330c] ETSI EN 300 330-1 V1.5.1 (2006-04)
ERM; Short Range Devices; Radio Equipment in the Frequency Range 9kHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9kHz to 30 MHz; Part 1: Technical Characteristics and Test Methods
[12/300330d] ETSI EN 300 330-2 V1.3.1 (2006-04)
ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive
[12/300330e] ETSI EN 300 330-2 V1.5.1 (2010-02)
ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive
[12/300330f] ETSI EN 300 330-1 V1.7.1 (2010-02)
ERM; Short Range Devices; Radio Equipment in the Frequency Range 9kHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9kHz to 30 MHz; Part 1: Technical Characteristics and Test Methods
[12/300440f] ETSI EN 300 440-1 v1.5.1 (2009-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods
[12/300440h] ETSI EN 300 440-1 V1.6.1 (2010-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods
[12/300440i] ETSI EN 300 440-2 v1.4.1 (2010-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
[12/301166d] ETSI EN 301 166-1 V1.3.2 (2009-11)
ERM; Land Mobile Service: Radio equipment for analogue and/or digital communication and operating on narrow band channels and having an antenna connector; Part 1: Technical characteristics and methods of measurement
[12/301166f] ETSI EN 301 166-2 V1.2.3
ERM; Land Mobile Service; Radio equipment of the analogue and/or digital communication and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&T
[12/301357d] ETSI EN 301 357-2 v1.4.1 (2007-12)
ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz. Part 2: Harmonized EN covering essential requirements of 3.2 of the R&TTE Directive
[12/301357e] ETSI EN 301 357-1 V1.4.1 (2008-11)
ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz; Part 1: Technical Characteristics and Test Methods
[12/3014899] ETSI EN 301 489-9 v1.4.1 (2007-11)
ERM; EMC standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices
[12/301489b] ETSI EN 301 489-3 v1.4.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz
[12/301489d] ETSI EN 301 489-5 v1.3.1 (2002-08)
Electromagnetic compatibility & Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)
[12/301489g] ETSI EN 301 489-8 v1.2.1 (2002-08)
ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations
[12/301502a] ETSI EN 301 502 v9.2.1 (2010-10)
Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive
[12/301511] EN 301 511 V9.0.2 (2003-03)
Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1,800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC)
[12/301839c] ETSI EN 301 839-1, v1.2.1 (2007-07)
ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 1: Technical characteristics, including electromagnetic compatibility requirements, and test methods
[12/301839d] ETSI EN 301 839-2, v1.2.1 (2007-07)
ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
[12/301839e] ETSI EN 301 839-1 V1.3.1 (2009-10)
ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
[12/301839f] ETSI EN 301 839-2 v1.3.1
ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
[12/301893c] ETSI EN 301 893 V1.4.1 (2007-12)
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
[12/301908p] ETSI EN 301 908-2, v4.2.1 (2010-03)
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
[12/302195] ETSI EN 302 195-2 V1.1.1 (2004-03)
(ERM); Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
[12/31489ac] ETSI EN 301 489-1 V1.8.1 (2008-04)
ERM; ElectroMagnetic Compatibilty (EMC); Standard for Radio Equipment and Services; Part 1: Common Technical Requirements
[12/31489fa] ETSI EN 301 489-7 v1.3.1 (2005-11)
ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for moble and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)
[12/31489m] ETSI EN 301 489-17 v1.3.2 (2008-04)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
[12/31489m1] ETSI EN 301 489-17 V2.1.1:2009
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems
[12/31489n] ETSI EN 301 489-31 V1.1.1 (2005)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9kHz to 315kHz band for Ultra Low Pwer Active
[12/31489rc] ETSI EN 301 489-24 v1.5.1 (2010-10)
(ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment
[12/321951] EN 302 195-1 V1.1.1 (2004-03)
ERM; Radio equipment in the frequency range 9kHz to 315kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 1: Technical characteristics and test methods
[12/322081b] ETSI EN 302 208-1 V1.2.1 (2008-04)
ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement
[12/322081c] ETSI EN 302 208-1 V1.3.1 (2010-02)
ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement
[12/322082b] ETSI EN 302 208-2 v1.3.1 (2010-02)
ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive
[12/322911] EN 302 291-1 V. 1.1.1
Electromagnetic compatibility and Radio spectrum Matters (ERM);Short Range Devices (SRD);Close Range Inductive Data Communication equipment operating at 13,56 MHz;Part 1: Technical characteristics and test methods
[12/322912] EN 302 291-2, v1.1.1
ERM; Short Range Devices; Close Range Inductive Data Communication equipment operating at 13,56 MHz - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive
[12/48927] ETSI EN 301 489-27 V1.1.1 (2004-06)
ERM; EMC standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheal devices (ULP-AMI-P)
[12/908b] ETSI EN 301 908-1 V4.2.1 (2010-03)
Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive
[12/AS4268e] AS/NZS 4268 (2008)
Radio equipment and systems - Short range devices - Limits and methods of measurement
[12/AS4268f] AS/NZS 4268 (2008) + A1 (2010)
Radio equipment and systems - Short range devices - Limits and methods of measurement
[12/AS4771] AS/NZS 4771 (2000) + Amendment No. 1
Technical characteristics and test conditions for data transmission equipment operating in the 900 MHz, 2.4 GHz and 5.8 GHz bands and using spread spectrum modulation techniques
[12/KCC1013] KCC Public Notification 2010-13, K only (Jul. 6, 2010)
Technical Requirements for Unlicensed Radio Equipment Established Without Notice
[12/KCC1131] KCC Public Notification 2011-31, K only (May 12, 2011)
Technical Requirements for Radio Equipment including other Technical Requirments
[12/KCC138] KCC Notice 2008-138, K only (Dec. 31, 2008)
Technical Requirements for unlicensed radio equipment
[12/KN48924] KN 301 489-24 (2008-5)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 24: Specific Conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and Portable (UE) Radio and Ancillary Equipment
[12/KN4897] KN 301 489-7 (2008-5)
ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for moble and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)
[12/KN489a] KN 301 489-1 (2008-5); RRL Notice No. 2008-4 (May 20, 2008)
(ERM); (EMC) standard for radio equipment and services; Part 1
[12/KN489q] KN 301 489-17 (2008-5); RRL Notice No. 2008-5 (May 20, 2008)
ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
[12/RRA0111] RRA Notice 2011-10, K only (Feb. 1, 2011)
Conformity Assessment Procedure of Radio Equipment
[12/RRA0817] RRA Notice 2008-17, K only (Jun. 2, 2008)
Technical Requirements for Measurement of Electromagnetic Field Strength
[12/RRA0818] RRA Notice 2008-18, K only (Jun. 2, 2008)
Conformity Assessment Procedure for Electromagnetic Field Strength and Specific Absorption Rate (SAR)
[12/RRA082] RRA Notice 2008-2, K only (May 23,2008)
Conformity Assessment Procedure for Type Official Approval and Type Registration of Radio Equipment
[12/RRA1046] RRA Public Notification 2010-46, K only (Dec. 29, 2010)
Technical Requirements for Measurement of Electromagnetic Field Strength
[12/RSS119c] RSS-119, Issue 10 (April 2010)
Land Mobile and Fixed Radio Transmitters and Receivers Operating in the Frequency Range 27.41-960 MHz
[12/RSS129a] RSS-129, Issue 2 (September 25, 1999)
800 MHz Dual-Mode CDMA Cellular Telephones - (limited to TX conducted and radiated power and RX - TX radiated spurious emissions)
[12/RSS131] RSS-131, Issue 2 (July 2003)
Zone Enhancers for the Land Mobile Service
[12/RSS132] RSS-132, Issue 2 (September 2005)
Cellular Telephones Employing New Technologies Operating in the Bands 824 - 849 MHz and 869 - 894 MHz
[12/RSS133d] RSS-133, Issue 5 (February 2009)
2GHz Personal Communications Services
[12/RSS139a] RSS-139, Isssue 2 (February 2009)
Advanced Wireless Services Equipment Operating in the Bands 1710-1755 MHz and 2110-2155 MHz
[12/RSS142b] RSS-142, Issue 4 (July 2010)
Narrowband Multipoint Communication Systems in the 1,427 - 1,430 MHz and 1,493.5 - 1,496.5 MHz Bands
[12/RSS193] RSS-193, Issue 1 (July 2003)
Multipoint and Point-to-Point Communication Systems (MCS) in the Fixed Service Operating in the 2,150 - 2,160 MHz, 2,500 - 2,596 MHz and 2,686 - 2,690 MHz Bands
[12/RSS194] RSS-194, Issue 1 (October 2007)
Fixed Wireless Access Equipment Operating in the Band 953-960 MHz
[12/RSS195] RSS-195, Issue 1 (January 2004)
Wireless Communications Service Equipment Operating in the Bands 2305 - 2320 MHz and 2345-2360 MHz
[12/RSS196] RSS-196, Issue 1 (March 2010)
Point-to-Multipoint Broadband Equipment Operating in the Bands 512-608 MHz and 614-698 MHz for Rural Remote Broadband Systems (RRBS) (TV Channels 21 to 51)
[12/RSS197] RSS-197, Issue 1 (February 2010)
Wireless Broadband Access Equipment Operating in the Band 3650-3700 MHz
[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment
[12/RSS210b] RSS-210, Issue 8 (December 2010)
Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment
[12/RSS243] RSS-243, Issue 2 (November 12, 2005)
Active Medical Implant Communications System Devices in the 402 - 405 MHz Band
[12/RSS243b] RSS-243, Issue 3, (February 2010)
Medical Devices Operating in the 401-406 MHz Frequency Band
[12/RSS310b] RSS-310, Issue 3 (December 2010)
Licence-exempt Radio Apparatus (All Frequency Bands): Category II Equipment
[12/RSSG2] RSS-Gen, Issue 2 (June 2007)
General Requirements and Information for the Certification of Radiocommunication Equipment
[12/RSSG3] RSS-Gen, Issue 3 (December 2010)
General Requirements and Information for the Certification of Radio Apparatus
- Telecommunications Test Methods
[12/300386h] ETSI EN 300 386 V1.5.1 (2010-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
Return to NVLAP Program Listing