IAPMO R&T Lab

NVLAP Lab Code: 200460-0

Address and Contact Information:

NVLAP Accreditation Information

Send E-Mail to NVLAP at: NVLAP@nist.gov

Commercial Products Testing

• Paints and Related Coatings and Materials

[09/A20] ASTM D2244
Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates

[09/D01] ASTM B117
Operating Salt Spray (Fog) Testing Apparatus

[09/D15] ASTM G155
Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials

• Plastics

[15/A18] ASTM D2565
Operating Xenon Arc-Type Light-Exposure Apparatus With and Without Water for Exposure of Plastics

• Plumbing

[19/C01] CSA B64.0 (Sec. 6, except 6.11)
Test Methods for Vacuum Breakers and Backflow Preventers

[19/C02] CSA B64.1.1 (Sec. 2.2 and 3.)
Vacuum Breakers, Atmospheric Type (AVB)

[19/C03] CSA B64.1.2 (Sec. 2.2 and 3.)
Vacuum Breakers, Pressure Type (PVB)

[19/C04] CSA B64.2 (Sec. 3)
Vacuum Breakers, Hose Connection Type (HCVB)

[19/C05] CSA B64.2.1 (Sec. 3)
Vacuum Breakers, Hose Connection Type (HCVB) with Manual Draining Feature

[19/C06] CSA B64.2.1.1 (Sec. 3.1, 3.2, 4.1 to 4.4)
Vacuum Breakers, Hose Connection Dual Check Type (HCDVB)

[19/C07] CSA B64.2.2 (Sec. 3)
Vacuum Breakers, Hose Connection Type (HCVB) with Automatic Draining Feature

[19/C08] CSA B64.3 (Sec. 2.2, 3)
Backflow Preventers, Dual Check Valve Type with Atmospheric Port (DCAP)

[19/C09] CSA B64.3.1 (Sec. 3)
Backflow Preventers, Dual Check Valve Type with Atmospheric Port for Carbonators (DCAPC)

[19/C10] CSA B64.4 (Sec. 2.2, 3)
Backflow Preventers, Reduced Pressure Principle Type (RP)

[19/C11] CSA B64.4.1 (Sec. 2.2, 3)
Backflow Preventers, Reduced Pressure Principle Type for Fire Systems (RPF)

[19/C12] CSA B64.5 (Sec. 2, 3)
Backflow Preventers, Double Check Valve Type (DCVA)

[19/C13] CSA B64.5.1 (Sec. 2.2, 3.1, 3.2)
Backflow Preventers, Double Check Valve Type for Fire Systems (DCVAF)

[19/C14] CSA B64.6 (Sec. 2.2, 3)
Backflow Preventers, Dual Check Valve Type (DuC)

[19/C15] CSA B64.6.1 (Sec. 2.2, 3)
Backflow Preventers, Dual Check Valve Type for Fire Systems (DuCF)

[19/C16] CSA B64.7 (Sec. 2.2, 2.3, 2.4, 2.5)
Vacuum Breakers, Laboratory Faucet Type (LFVB)

[19/C17] CSA B64.8 (Sec. 2.2, 2.3, 2.4, 3.2, 3.3, 3.4)
Backflow Preventers, Dual Check Valve Type with Intermediate Vent (DuCV)

[19/C18] CSA B64.9 (Sec. 3)
Backflow Preventers, Single Check Valve Type for Fire Systems (SCVAF)

[19/C19] CSA B45.0 (Sec. 15, except 15.8.9)
General Requirements for Plumbing Fixtures

[19/C20] CSA B45.1 (Sec. 3.1, 3.5, 7)
Ceramic Plumbing Fixtures

[19/C21] CSA B45.2 (Sec. 2.1, 2.4)
Enamelled Cast-Iron Plumbing Fixtures

[19/C22] CSA B45.3 (Sec. 3.3)
Porcelain-Enamelled Steel Plumbing Fixtures

[19/C23] CSA B45.4 (Sec. 3.1, 3.2, 3.5, 5)
Stainless Steel Plumbing Fixtures

[19/C24] CSA B45.5 (Sec. 5, except 5.17)
Plastic Plumbing Fixtures

[19/C25] CSA B45.6 (Sec. 4)
Nonrecirculating Toilets and Waste-Holding Tanks for Use in Recreational Vehicles

[19/C26] CSA B45.7 (Sec. 4)
Self-Contained, Recirculating, Chemically Controlled Toilets for Use in Recreational Vehicles

[19/C27] CSA B45.8 (Sec. 3)
Terrazzo Plumbing Fixtures

[19/C28] CSA B45.9 (Sec. 3, except 3.1)
Macerating Systems and Related Components

[19/C29] CSA B125 (Sec. 6, 7)
Plumbing Fittings

[19/F01] ASME A112.18.1M (Sec. 4.2)
Plumbing Fixture Fittings (Coatings, Electrodeposited and Organic Tests)

[19/F02] ASME A112.18.1M (Sec. 4.14) (ASSE 1016)
Plumbing Fixture Fittings (Temperature and Pressure Compensating Mixing Valves)

[19/F03] ASME A112.18.1M (Sec. 5.2)
Plumbing Fixture Fittings (Strength Tests; Burst, Bending, Thread Torque, and Spout)

[19/F04] ASME A112.18.1M (Sec. 5.4)
Plumbing Fixture Fittings (Valve Closure Test)

[19/F05] ASME A112.18.1M (Sec. 5.5)
Plumbing Fixture Fittings (Flow Capacity)

[19/F06] ASME A112.18.1M (Sec. 5.6)
Plumbing Fixture Fittings (Life Test)

[19/F07] ASME A112.18.1M (Sec. 5.7)
Plumbing Fixture Fittings (High Temperature Extreme)

[19/F08] ASME A112.18.1M (Sec. 5.8)
Plumbing Fixture Fittings (Intermittent Shock)

[19/F10] ASME A112.18.1M (Sec. 5.3)
Plumbing Fixture Fittings (Handle Security Test)

[19/F14] ASME A112.18.6
Flexible Water Connectors

[19/F15] ASME A112.18.1 (Sec. 2.2)
Coatings

[19/F16] ASME A112.18.1 (Sec. 2.14)(ASSE 1016)
Temperature and Pressure Compensating Shower Mixing Valves

[19/F17] ASME A112.18.1 (Sec. 3.2)
Strength Test

[19/F18] ASME A112.18.1 (Sec. 3.3)
Handle Security Test

[19/F19] ASME A112.18.1 (Sec. 3.4)
Valve Operating Test

[19/F20] ASME A112.18.1 (Sec. 3.5)
Flow Capacity Test Procedure

[19/F21] ASME A112.18.1 (Sec. 3.6)
Life Test

[19/F22] ASME A112.18.1 (Sec. 3.7)
High Temperature Extreme Test

[19/F23] ASME A112.18.1 (Sec. 3.8)
Intermittent Shock Test

[19/M01] ICC/ANSI A117.1 (Sec. 609, 610)
Buildings and Facilities Providing Accessibility and Usability for Physically Handicapped People

[19/M02] ASME/ANSI A112.19.7M (Sec. 5, 7)
Whirlpool Bathtub Appliances

[19/M03] ASME/ANSI A112.19.8M (Sec. 4, 5)
Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances

[19/M03a] ASME A112.19.8 - 2007 (Sec. 4, 5)
Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances

[19/M04] ASTM F446
Standard Consumer Safety Specification for Grab Bars and Accessories Installed in Bathing Area

[19/M05] ASTM F462
Consumer Safety Specification for Slip-Resistant Bathing Facilities

[19/M06] ASTM F1807
Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing

[19/M07] ASTM F1974
Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

[19/M08] ASTM B456
Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

[19/M11] ASTM B571
Practice for Qualitative Adhesion Testing of Metallic Coatings

[19/M12] ASTM B604
Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics

[19/M14] ASTM C282
Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)

[19/M15] ASTM C297/C297M
Flatwise Tensile Strength of Sandwich Constructions

[19/M16] ASTM C346
45-deg Specular Gloss of Ceramic Materials

[19/M17] ASTM D570
Water Absorption of Plastics

[19/M19] ASTM D1186
Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base

[19/M20] ASTM D1598
Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

[19/M22] ASTM D2122
Determining Dimensions of Thermoplastic Pipe and Fittings

[19/M23] ASTM D2444
Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

[19/M25] ASTM E805
Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials

[19/M27] ASTM E1347
Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry

[19/M28] ASTM G85
Practice for Modified Salt Spray (Fog) Testing

[19/M29] ASTM G151
Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

[19/M30] ASTM B368
Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

[19/M32] ASTM D3359
Measuring Adhesion by Tape Test

[19/P01] ANSI Z124.1 (Sec. 4, 5, 6)
Plastic Bathtub Units (Structural Integrity, Physical Characteristics and Material Tests)

[19/P02] ANSI Z124.2 (Sec. 4, 5, 6)
Plastic Shower Receptors-Stalls (Structural Integrity, Physical Characteristics and Materials Tests)

[19/P03] ANSI Z124.3 (Sec. 4, 5, 6)
Plastic Lavatories (Structural Integrity, Physical Characteristics and Materials Tests)

[19/P03a] ANSI/ICPA-SS-1 (Sec. 4, 5, 6)
Performance Standard for Solid Surface Materials (Structural Integrity, Physical Characteristics and Materials Tests)

[19/P04] ANSI Z124.4 (Sec. 4, 5)
Plastic Water Closet Bowls and Tanks (Structural Integrity and Physical Characteristics)

[19/P05] ANSI Z124.4 (Sec. 2.11) per ASME A112.19.6M (Sec. 7.1)
Plastic Water Closet Bowls and Tanks (Sanitary and Hydraulic Performance of Water Closet Tanks and Bowls)

[19/P06] ANSI/IAPMO Z124.6 (Sec. 4, 5, 6)
Plastic Sinks

[19/P07] ANSI/IAPMO Z124.8 (Sec. 4, 5)
Plastic Bathtub Liners

[19/P08] ANSI Z124.5
American National Standard for Plastic Toilet (Water Closet) Seats

[19/P09] ANSI Z124.7 (Sec. 4, 5, 6, 8)
American National Standard for Prefabricated Plastic Spa Shells

[19/P10] ANSI Z124.9
American National Standard for Plastic Urinal Fixtures

[19/U01a] ASME A112.18.3 (Sec. 11.1)
Check Valves (New and After Durability Tests)

[19/U01b] ASME A112.18.3 (Sec. 11.2)
Vacuum Breakers, Automatic Diverters, and Vents

[19/U01c] ASME A112.18.3 (Sec. 12)
Functional Test of Backflow Prevention Systems

[19/U01d] ASME A112.18.3 (Sec. 14)
Leakage of Protection Systems With Atmospheric Vents

[19/U01f] ASME A112.18.3 (Sec. 16)
Verification of Critical Level (Hose Connected Movable Outlet Faucets with Atmospheric Vents)

[19/U02] ASSE 1001
Pipe Applied Atmospheric Type Vacuum Breakers

[19/U03] ASSE 1002
Anti-siphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tanks

[19/U04] ASSE 1003
Water Pressure Reducing Valves

[19/U05] ASSE 1011
Hose Connection Vacuum Breakers

[19/U06] ASSE 1012
Backflow Preventer with Intermediate Atmospheric Vent

[19/U07] ASSE 1014
Hand-Held Showers

[19/U08] ASSE 1016
Individual Thermostatic, Pressure Balancing, and Combination Pressure Balancing and Thermostatic Control Valves for Individual Fixture Fittings

[19/U09] ASSE 1017
Temperature Actuated Mixing Valves for Hot Water Distribution Systems

[19/U10] ASSE 1019
Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type

[19/U11] ASSE 1021
Drain Air Gaps for Domestic Dishwasher Applications

[19/U12] ASSE 1025
Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications

[19/U13] ASSE 1035
Laboratory Faucet Backflow Preventers

[19/U14] ASSE 1037
Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures

[19/U15] ASSE 1066
Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings

[19/V01] ASME A112.19.2M (Sec. 8.1)
Vitreous China Plumbing Fixtures (Absorption - Boiling)

[19/V02] ASME A112.19.2M (Sec. 8.2)
Vitreous China Plumbing Fixtures (Crazing)

[19/V03] ASME A112.19.2M (Sec. 8.3)
Vitreous China Plumbing Fixtures (Warpage)

[19/V04] ASME A112.19.2M (Sec. 8.7)
Vitreous China Plumbing Fixtures (Load Tests-Wall Hung Products)

[19/V05] ASME A112.19.2M (Sec. 8.6)
Vitreous China Plumbing Fixtures (Insulated Tank)

[19/V06] ASME A112.19.2M (Sec. 8.5)
Vitreous China Plumbing Fixtures (Closet Auger)

[19/V07] ASME A112.19.2 (Sec. 7.1)
Vitreous China Plumbing Fixtures (Absorption - Boiling)

[19/V08] ASME A112.19.2 (Sec. 7.2)
Vitreous China Plumbing Fixtures (Crazing)

[19/V09] ASME A112.19.2 (Sec. 7.3)
Vitreous China Plumbing Fixtures (Warpage)

[19/V10] ASME A112.19.2 (Sec. 7.7)
Vitreous China Plumbing Fixtures (Load Tests - Wall Mounted Fixture Products)

[19/V11] ASME A112.19.2 (Sec. 7.6)
Vitreous China Plumbing Fixtures (Insulated Tanks)

[19/V12] ASME A112.19.2 (Sec. 7.5)
Vitreous China Plumbing Fixtures (Auger Test)

[19/W01] ASME A112.19.6 (Sec. 7.1.2)
Laboratory Tests for Waste Removal and Water Consumption (Test Apparatus and General Instructions)

[19/W02] ASME A112.19.6 (Sec. 7.1.3)
Laboratory Tests for Waste Removal and Water Consumption (Removal of Solids)

[19/W03] ASME A112.19.6 (Sec. 7.1.4)
Laboratory Tests for Waste Removal and Water Consumption (Washing of Flushing Surface-Rim Wash)

[19/W04] ASME A112.19.6 (Sec. 7.1.5)
Laboratory Tests for Waste Removal and Water Consumption (Removal of Waste Liquids-Water Change/Dye Test)

[19/W05] ASME A112.19.6 (Sec. 7.1.6)
Laboratory Tests for Waste Removal and Water Consumption (Water Consumption and Hydraulic Characteristics)

[19/W06] ASME A112.19.6 (Sec. 7.1.7)
Laboratory Tests for Waste Removal and Water Consumption (Drainline Transport Characterization Procedure)

[19/W07] ASME A112.19.6 (Sec. 7.1.8)
Laboratory Tests for Waste Removal and Water Consumption (Water Rise)

[19/W08] ASME A112.19.6 (Sec. 7.1.9)
Laboratory Tests for Waste Removal and Water Consumption (Rim Top and Seat Fouling)

[19/W09] ASME A112.19.1M
Enameled Cast Iron Plumbing Fixtures

[19/W10] ASME A112.19.3
Stainless Steel Plumbing Fixtures (Designed for Residential Use)

[19/W11] ANSI/ASME A112.19.4M
Porcelain Enameled Formed Steel Plumbing Fixtures

[19/W12] ASME A112.19.5
Trim For Water-Closet Bowls, Tanks, and Urinals

[19/W13] ASME A112.19.10
Dual Flush Devices for Water Closets

[19/W15] ASME A112.19.2 (Sec. 8.3)
Trap Seal Restoration

[19/W16] ASME A112.19.2 (Sec. 8.4)
Water Consumption

[19/W17] ASME A112.19.2 (Sec. 8.5)
Granule and Ball Test

[19/W18] ASME A112.19.2 (Sec. 8.6)
Surface Wash Test

[19/W19] ASME A112.19.2 (Sec. 8.7)
Mixed Media with Neutrally Buoyant Wastes

[19/W20] ASME A112.19.2 (Sec. 8.8)
Drainline Transport Characterization Procedure

[19/W21] ASME A112.19.2 (Sec. 10.3)
Trap Seal Depth Determination

[19/W22] ASME A112.19.2 (Sec. 10.4)
Urinals Ink Test

[19/W23] ASME A112.19.2 (Sec. 10.5)
Urinals Dye Test

[19/W24] ASME A112.19.2 (Sec. 10.6)
Urinals Water Consumption

[19/W25] ASME A112.19.2 (Sec. 8.1)
General

[19/W26] ASME A112.19.2 (Sec. 8.2)
Trap Seal Depth Determination

Return to NVLAP Program Listing

NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: August 29, 2008

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA