ITC Engineering Services, Inc.
NVLAP Lab Code: 200172-0
Address and Contact Information:
9959 Calaveras RoadP.O. Box 543
Sunol, CA 94586-0543
Contact: Mr. Michael Gbadebo, P.E.
Phone: 925-862-2944
Fax: 925-862-9013
E-Mail: mgbadebo@itcemc.com
Send E-Mail to Laboratory: ITC Engineering Services, Inc.
URL: http://www.itcemc.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.Send E-Mail to NVLAP at: NVLAP@nist.gov
Electromagnetic Compatibility & Telecommunications
Accreditation Valid From: July 1, 2011 Through: June 30, 2012
- Emissions Test Methods
[12/610006c] EN 61000-6-3 (2001) and IEC 61000-6-3 (1996)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
[12/610006d] EN 61000-6-4 (2001) and IEC 61000-6-4 (1997)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
[12/610006m] EN 61000-6-4 (2007)
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments
[12/610006p] IEC 61000-6-3 (2006-06)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
[12/61000g] EN 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments
[12/61326d] IEC 61326-1 (2005-12)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/CIS11]
IEC/CISPR 11 + A1 (1997), EN 55011 (1998), AS/NZS CISPR 11 (2002), and CNS 13803 (1997): Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipment
[12/CIS11ab] CNS 13803 (2003)
Limits and methods of measurement of electromagnetic interference characteristics of industrial, scientific an medical (ISM) radio-frequency equipment
[12/CIS11h] AS/NZS CISPR 11 (2004)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11m] EN 55011 (2007)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11p] IEC/CISPR 11 Ed. 5 (2009-05)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[12/CIS15c] EN 55015 (2000) + A1 (2001)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
[12/CIS15cc] EN 55015 (2006)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
[12/CIS22] IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment
[12/CIS22a] IEC/CISPR 22 (1993) and EN 55022 (1994)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996)
[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
[12/CIS22f] CNS 13438 (2006)
LImits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
[12/CIS22g] IEC/CISPR 22, Edition 5 (2005-04) and EN 55022 (2006)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/CIS22k] IEC/CISPR 22 (2008-09)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/EM02a]
IEC 61000-3-2, Edition 2.1 (2001-10), EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000): Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A)
[12/EM02ee] AS/NZS 61000-3-2 (2007)
Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD)
[12/EM02i] IEC 61000-3-2, Ed. 3.0 (2005-11)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)
[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
[12/EM03b] IEC 61000-3-3, Edition 1.1(2002-03) & EN 61000-3-3, A1(2001)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections
[12/EM11] IEC 61000-3-11, 1st edition (2000-08)
EMC - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems -Equipment with rated current <=75A and subject to conditional connection
[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators
[12/FCC15c] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators
[12/KN11d] KN11 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11
[12/KN15] KN15 with RRL Notice No. 2004-69 (Sept. 22, 2004)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
[12/KN22] KN22 with RRL Notice No. 2005-82 (Sept. 29, 2005)
RRL Notice No. 2005-82: Technical Requirements for Electromagnetic Interference Annex 8 (KN-22), RRL Notice No. 2005-131: Conformity Assessment Procedures for Electromagnetic Interference
[12/KN22d1] KN22 (Annex 8) with RRA Announce 2008-11 (Dec. 16, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)
[12/KN22e] KN22 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22
[12/KNcis11] KN11 with RRL Notice No. 2005-82 (Sept. 29, 2005)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/T51b] AS/NZS CISPR 22, 3rd Edition (2006)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- General MIL Standards (Non 462)
[12/MS810f] MIL-STD-810 ver. F
Methods: 501.4, 502.4, 503.4, 505.4, 506.4, 507.4, 514.5, 515.5, and 516.5
- Immunity Test Methods
[12/610006a] EN 61000-6-1 (2001)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments
[12/610006b] EN 61000-6-2 (2001)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/610006h] IEC 61000-6-1, 2nd edition (2005-03)
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments
[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/ANC63] ANSI C63.16 (1993)
American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment
[12/C62a] IEEE Std C62.38 (1994)
IEEE Guide on Electrostatic Discharge (ESD): ESD Withstand Capability Evasluation Methods (for Electronic Equipment Subassemblies)
[12/CIS24] IEC/CISPR 24 (1997) A2(2002) & EN 55024 (1998) A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/I01] IEC 61000-4-2, Ed. 1.2 (2001); EN 61000-4-2
Electrostatic Discharge Immunity Test
[12/I01f] EN 61000-4-2 (2009-05)
[12/I02] IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002)
Radiated Radio-Frequency Electromagnetic Field Immunity Test
[12/I03] IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I05e1] EN 61000-4-6 (1996) + A1 (2001) + A2 (2006)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I05h] EN 61000-4-6 (2007)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/I07f] EN 61000-4-11 (2004)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/I07g] IEC 61000-4-11 (2004)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/I08] IEC/CISPR 24 (1997), Amd1, A1(2001); EN 55024 (1998)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/KN11] KN 61000-4-11 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/KN11a] KN 61000-4-11 with RRL Notice No. 2005-130 (Dec 27, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/KN11f] KN 61000-4-11 (2008-5); RRL Notice No. 2008-4 (May 20, 2008)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/KN11f1] KN 61000-4-11 (Annex 7) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Voltage Dips, Short Interruptions and Voltage Variations Immunity tests)
[12/KN11g] KN 61000-4-11 with RRL Notice No. 2006-127 (Dec 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference
[12/KN2] KN 61000-4-2 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electrostatic Discharge Immunity Test
[12/KN2a] KN 61000-4-2 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electrostatic Discharge Immunity Test
[12/KN2d1] KN 61000-4-2 (Annex 1); RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Precedure for EMS (Electrostatic Discharge Immunity Test)
[12/KN3] KN 61000-4-3 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Radiated, radio-frequency, electromagnetic field immunity test
[12/KN31] Korea RRL Notice No. 31 (2004)
Conformity Assessment Procedures for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN 61000-4-4, KN 61000-4-5, KN 61000-4-8, KN 61000-4-11, KN 20, KN 41, and KN 50.
[12/KN3a] KN 61000-4-3 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Radiated, radio-frequency, electromagnetic field immunity test
[12/KN3c1] KN 61000-4-3 (Annex 2) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Radiated, radio-frequency, electromagnetic field immunity test)
[12/KN4] KN 61000-4-4 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/KN4a] KN 61000-4-4 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun
[12/KN4c1] KN 61000-4-4 (Annex 3) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Electrical Fast Transient/Burst test)
[12/KN5] KN 61000-4-5 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Surge Immunity Test
[12/KN5a] KN 61000-4-5 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Surge Immunity Test
[12/KN5c1] KN 61000-4-5 (Annex 4) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Surge Immunity Test)
[12/KN6] KN 61000-4-6 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/KN6a] KN 61000-4-6 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances,
[12/KN6c1] KN 61000-4-6 (Annex 5); RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Conducted disturbances, induced by radio-frequency fields test)
[12/KN8] KN 61000-4-8 with RRL Notice No. 2005-83 (Sept. 29, 2005)
Power Frequency Magnetic Field Immunity Test
[12/KN8a] KN 61000-4-8 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Power Frequency Magnetic Field Immunity Test
[12/KN8c1] KN 61000-4-8 (Annex 6) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Power Frequency Magnetic Field Immunity Test)
- MIL-STD-462 : Conducted Emissions
[12/A13]
MIL-STD-462 Version D Method CE101
[12/A14]
MIL-STD-462 Version D Method CE102
[12/A15]
MIL-STD-462 Version D Method CE106
[12/A16]
MIL-STD-461 Version E Method CE101
[12/A17]
MIL-STD-461 Version E Method CE102
[12/A18]
MIL-STD-461 Version E Method CE106
[12/A19]
MIL-STD-461 Version F Method CE101
[12/A20]
MIL-STD-461 Version F Method CE102
[12/A21]
MIL-STD-461 Version F Method CE106
- MIL-STD-462 : Conducted Susceptibility
[12/B12]
MIL-STD-462 Version D Method CS101
[12/B13]
MIL-STD-462 Version D Method CS103
[12/B14]
MIL-STD-462 Version D Method CS104
[12/B15]
MIL-STD-462 Version D Method CS105
[12/B16]
MIL-STD-462 Version D Method CS109
[12/B17]
MIL-STD-462 Version D Method CS114
[12/B18]
MIL-STD-462 Version D Method CS115
[12/B20]
MIL-STD-461 Version E Method CS101
[12/B21]
MIL-STD-461 Version E Method CS103
[12/B22]
MIL-STD-461 Version E Method CS104
[12/B23]
MIL-STD-461 Version E Method CS105
[12/B24]
MIL-STD-461 Version E Method CS109
[12/B25]
MIL-STD-461 Version E Method CS114
[12/B26]
MIL-STD-461 Version E Method CS115
[12/B27]
MIL-STD-461 Version E Method CS116
[12/B28]
MIL-STD-461 Version F Method CS101
[12/B29]
MIL-STD-461 Version F Method CS103
[12/B30]
MIL-STD-461 Version F Method CS104
[12/B31]
MIL-STD-461 Version F Method CS105
[12/B32]
MIL-STD-461 Version F Method CS106
[12/B33]
MIL-STD-461 Version F Method CS109
[12/B34]
MIL-STD-461 Version F Method CS114
[12/B35]
MIL-STD-461 Version F Method CS115
[12/B36]
MIL-STD-461 Version F Method CS116
- MIL-STD-462 : Radiated Emissions
[12/D04]
MIL-STD-462 Version D Method RE101
[12/D05]
MIL-STD-462 Version D Method RE102
[12/D06]
MIL-STD-462 Version D Method RE103
[12/D07]
MIL-STD-461 Version E Method RE101
[12/D08]
MIL-STD-461 Version E Method RE102
[12/D09]
MIL-STD-461 Version E Method RE103
[12/D10]
MIL-STD-461 Version F Method RE101
[12/D11]
MIL-STD-461 Version F Method RE102
[12/D12]
MIL-STD-461 Version F Method RE103
- MIL-STD-462 : Radiated Susceptibility
[12/E08]
MIL-STD-462 Version D Method RS101
[12/E09]
MIL-STD-462 Version D Method RS103
[12/E11]
MIL-STD-461 Version E Method RS101
[12/E12]
MIL-STD-461 Version E Method RS103
[12/E13]
MIL-STD-461 Version E Method RS105
[12/E14]
MIL-STD-461 Version F Method RS01
[12/E15]
MIL-STD-461 Version F Method RS101
[12/E16]
MIL-STD-461 Version F Method RS103
[12/E17]
MIL-STD-461 Version F Method RS105
- Product Safety Test Methods
[12/60204] EN 60204-1:2006
Safety of machinery. Electrical equipment of machines. General requirements
[12/60529c] IEC 60529 Ed. 2.1 (2001)
Degrees of protection provided by enclosures (IP Code)
[12/6060113] IEC 60601-1-3 Ed. 2.0 (2008)
[12/6060114] IEC 60601-1-4 Ed1.1 (2000)
Medical electrical equipment - Part 1-4: General requirements for safety - Collateral Standard: Programmable electrical medical systems
[12/606011a] IEC 60601-1 Ed. 2 (1988) +A1 (1991) +A2 (1995)
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[12/606012] IEC 60601-2-22 ed3.0 (2007)
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
[12/60601aa] IEC 60601-1-2, Ed 2.1 (2004-11) & EN 60601-1-2 (2002)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
[12/60601ab] IEC 60601-1-2, Ed. 3.0 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
[12/60601dd] IEC 60601-2-37, Ed. 2.0 (2007-08)
Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment
[12/60601e] IEC 60601-1-1 (2000-12), 2nd edition
Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems
[12/60601h1] EN 60601-1-2 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: EMC - Requirements and tests
[12/60611] IEC 60601-1, 3rd Ed. (2005)
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[12/60825] EN 60825-1:2007
Safety of laser products - Part 1: Equipment classification and requirements
[12/61010a] IEC 61010-1 (2001-02), 2nd edition
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
[12/61010b] EN 61010-1 (2001)
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
[12/61326b] IEC 61326, Ed. 2 (2002-02)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/KRs1] RRL Notice No. 2004-42 (June 10, 2004)
Conformity Assessment Procedure for Type Approval of Telecommunications Terminal Equipment, Appendix 4: Electrical Safety Test Methods
[12/T41a] AS/NZS 60950 (2000)
Safety of Information Technology Equipment (including Amdt1)
[12/T41d] ANSI/UL 60950-2000 and CAN/CSA-C22.22 No. 60950-00
Safety of Information Technology Equipment
[12/T41g] EN 60950 (2000)
Safety of information technology equipment
[12/T41i] EN 60950-1 (2006), IEC 60950-1 (2005) & UL 60950-1
Information technology equipment - Safety - Part 1: General requirements
[12/T50] AS/NZS 3260 (1993) + Supplement 1 (1996)
Safety of Information Technology Equipment Including Electrical Business Equipment
- Radio Test Methods
[12/300220a] EN 300 220-1 V1.3.1 (2000-09)
Electromagnetic compatibility and Radio spectrum Matters; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods
[12/300328b] ETSI EN 300 328-2 v1.2.1 (2001-12)
Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
[12/300328c] ETSI EN 300 328-2 V1.1.1 (2000-07)
Wideband Transmission systems: Data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
[12/300328d] ETS EN 300 328, Second Edition (November 1996)
Radio Equipment and Systems (RES); Wideband transmission systems; Technical characteristics and test conditions for data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques
[12/300440a] ETSI EN 300 440-1 v1.3.1 (2001-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods
[12/300440f] ETSI EN 300 440-1 v1.5.1 (2009-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods
[12/RSS135] RSS-135, Issue 1 (October 26, 1996)
Digital Scanner Receivers
[12/RSS135a] RSS-135, Issue 2 (June 2009)
[12/RSS210] RSS-210, Issue 6 (Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment
[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment
[12/RSS215] RSS-215, Issue 1 (November 6, 1999)
Analogue Scanner Receivers
[12/RSS215a] RSS-215, Issue 2 (June 2009)
Analogue Scanner Receivers
[12/RSS310] RSS-310, Issue 1 ( Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment
[12/RSS310a] RSS-310, Issue 2 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment
[12/RSSG2] RSS-Gen, Issue 2 (June 2007)
General Requirements and Information for the Certification of Radiocommunication Equipment
[12/RSSgen] RSS-Gen, Issue 1 (Sept. 2005)
General Requirements and Information for the Certification of Radiocommunication Equipment
- Telecommunications Test Methods
[12/300386a] EN 300 386 V1.2.1 (2000-03)
Electromagnetic compatibility and radio spectrum matter (ERM); Telecommunication network equipment; Electromagnetic Compatibility (EMC) requirements
[12/300386g] ETSI EN 300 386 V1.4.1 (2008-02)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
[12/CS03a] Industry Canada CS-03, Issue 9, Amendment 1 (2005)
Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility (Sections I, II, V only)
[12/CS03d] Industry Canada CS-03, Issue 9 Amendment 4 (2009)
Compliance Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements and Hearing Aids Compatibility
[12/FCC2a] TIA/EIA 603-C (2004) with 47 CFR Part 2
Personal Mobile Radio Services in 47 CFR Parts 22 (cellular), 24, 25, 26, and 27
[12/FCC2b] TIA/EIA 603-C (2004) with 47 CFR Part 2
General Mobile Radio Services in 47 CFR Parts 22 (non-cellular), 74, 90, 95, and 97
[12/FCC2c] TIA/EIA 603-C (2004) with 47 CFR Part 2
Maritime and Aviation Radio Services in 47 CFR Parts 80 and 87
[12/FCC2d] TIA/EIA 603-C (2004) with 47 CFR Part 2
Microwave Radio Services in 47 CFR Parts 27, 74, and 101
[12/IE269] IEEE Std 269 (2002)
IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets
[12/KR15] MIC Notice No. 2004-15 (March 18, 2004)
Technical Requirements for Telecommunications Terminal Equipment
[12/KR15a] RRL Notice No. 2005-96 (October 26, 2005)
Technical Requirements for Telecommunications Terminal Equipment
[12/T01]
Terminal Equipment Network Protection Standards, FCC/ACTA Method - 47 CFR Part 68 - Analog and Digital
[12/T01a]
68.302 (Par. c,d,e,f) Environmental simulation; 68.304 Leakage current limit.; 68.306 Hazardous voltage limit.; 68.308 Signal power limit.; 68.310 Longitudinal balance limit.; 68.312 On-hook impedance limit.; 68.314 Billing protection
[12/T01b]
68.316 and 68.317 Hearing Aid Compatibility: technical standards
[12/T01c]
68.302 Environmental simulation (Par. a,b)
[12/T42] AS/ACIF S002 (2001) + Amendment 1
Analogue Interworking and Non-Interference Requirements for Customer Equipment Connected to the Public Switched Telephone Network
[12/T42a] AS/ACIF S002:2005
Analogue Interworking and Non-Interference Requirements for Customer Equipment Connected to the Public Switched Telephone Network
[12/T43] AS/ACIF S003:2001
Customer Switching Systems Connected to the Public Switched Telephone Network
[12/T43b] AS/ACIF S003:2006
Customer Switching Systems Connected to the Public Switched Telephone Network
[12/TIA968] ANSI/TIA-968-A (2003)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network
[12/TIA968a] ANSI/TIA-968-A-1 (2003)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 1
[12/TIA968b] ANSI/TIA-968-A-2 (2004)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 2
[12/TIA968c] ANSI/TIA-968-A-3 (2005)
Telephone Terminal Equipment, Technical Requirements for Connection of Terminal Equipment to the Telephone Network - Addendum 3
Return to NVLAP Program Listing