Technology Services, National Voluntary Laboratory Accreditation Program, NIST Go to Technology Services Home Page Go to NIST Home Page Go to National Voluntary Laboratory Accreditation Program Home Page Go to Directory of Accredited Laboratories Go to Fields of Accreditation Go to Publications/Applications Go to Mutual Recognition Arrangements Go to Assessor Resources Contact National Voluntary Laboratory Accreditation Program

Nemko USA, Inc. - San Diego EMC Division

NVLAP Lab Code: 200116-0


Address and Contact Information:

11696 Sorrento Valley Road, Suite F
San Diego, CA 92121
Contact: Mr. Grant Schmidbauer
Phone: 858-755-5525 x203
Fax: 858-259-7170
E-Mail: Grant.Schmidbauer@nemko.com
Send E-Mail to Laboratory: Nemko USA, Inc. - San Diego EMC Division
URL: http://www.nemko.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of November 1, 2009. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov


Electromagnetic Compatibility & Telecommunications

Accreditation Valid From: January 1, 2009 Through: December 31, 2009

  • Emissions Test Methods

[12/100063c] IEC 61000-6-3 (1996), EN 61000-6-3 (2001), A1 (2004)
Electromagnetic Compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial, and light-industrial environments.

[12/50121cc] 0EN 50121-3-2 (2006)
Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus

[12/50121e] EN 50121-2 (2006)
Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside world

[12/50121f] EN 50121-3-1 (2006)
Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle

[12/50121g] EN 50121-4 (2006)
Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus

[12/60E213] RTCA DO-160E
Section 21.3, RF Emissions, Conducted

[12/60E214] RTCA DO-160E
Section 21.4, RF Emissions, Radiated

[12/60F214] RTCA DO-160F
Section 21.4, RF Emissions, Conducted

[12/60F215] RTCA DO-160F
Section 21.5, RF Emissions, Radiated

[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

[12/61000f] EN 61000-6-3 (2001) + A1 (2004)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments

[12/61000g] EN 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments

[12/61326d] IEC 61326-1 (2005-12)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/CIS11aa]
IEC/CISPR 11 (2003), EN 55011 (1998) + A1 (1999), AS/NZS CISPR 11 (2002), and CNS 13803 (2003): Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipmen

[12/CIS11f] AS/NZS CISPR 11 (2002)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11g] IEC/CISPR 11, Ed. 4.1 (2004-06)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurements

[12/CIS11h] AS/NZS CISPR 11 (2004)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11i] IEC/CISPR 11, Ed. 4.1 (2004-06) + A1(2004)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11j] EN 55011 (1998) + A1(1999), A2(2002)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11k] IEC/CISPR 11 (2003), EN 55011 (1998), A2(2002)
Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipment

[12/CIS11l] IEC/CISPR 11 (2003), + A1 (2004)
Industrial, scientific, and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS14] CISPR 14-1 (March 30, 2000)
Limits and Methods of Measurement of Radio interference Characteristics of Household Electrical Appliances, Portable Tools and Similiar Electrical Apparatus - Part 1: Emissions

[12/CIS14a] EN 55014-1 (1993), A1 (1997), A2 (1999)

[12/CIS14b] AS/NZS 1044 (1995)

[12/CIS14b1] AS/NZS CISPR 14-1 (2003)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14c] CNS 13783-1
Electromagnetic Compatibility Requirements for household appliances, electric tools and similar apparatus - Part 1: Emissions

[12/CIS14gg] CNS 13783-1 (2004)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14x] IEC/CISPR 14-1, Ed. 4 (2003)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14x1] IEC/CISPR 14-1, Ed. 5.0 (2005)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission

[12/CIS22] IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment

[12/CIS22a] IEC/CISPR 22 (1993) and EN 55022 (1994)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996)

[12/CIS22a4] IEC/CISPR 22 (1993) & EN 55022 (1994)+A1(1995), A2(1997)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment

[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment

[12/CIS22c1] IEC/CISPR 22, Edition 5 (2005) and EN 55022 (1998)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS22c3] IEC/CISPR 22, Edition 5 (2005) + A1(2005)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS22c4] EN 55022 (1998) + A1(2000) + A2(2003)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS22c5] IEC/CISPR 22, Edition 5 (2005) + A1(2005) + A2 (2006)
Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement

[12/CIS22g] IEC/CISPR 22, Edition 5 (2005-04) and EN 55022 (2006)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

[12/CIS22h] IEC/CISPR 22 (2005) + A2 (2006)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

[12/CIS22i] IEC/CISPR 22, Edition 5.2 (2006-03)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

[12/CIS22j] EN 55022 (2006)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS25b] IEC/CISPR 25, 2nd ed. (2002-08)
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices ? Limits and methods of measurement: Sections 6.2, 6.3, 6.4, & 6.5

[12/EM02a]
IEC 61000-3-2, Edition 2.1 (2001-10), EN 61000-3-2 (2000), and AS/NZS 2279.1 (2000): Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A)

[12/EM02aa] EN 61000-3-2 (2000) + A2 (2005)
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2. Limits for harmonic current emissions (equipment input current <= 16A per phase)

[12/EM02d] IEC 61000-3-2, Edition 2.2 (2004-11)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)

[12/EM02i] IEC 61000-3-2, Ed. 3.0 (2005-11)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)

[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)

[12/EM03b] IEC 61000-3-3, Edition 1.1(2002-03) & EN 61000-3-3, A1(2001)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections

[12/EM03g] IEC 61000-3-3, Edition 1.1 (2003) +A2 (2005)
EMC Part 3-3: Limits - Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connections

[12/EM03h] IEC/EN 61000-3-3 (1995) + A1 (2001) + A2 (2005)
Conducted Emissions, Voltage Flicker

[12/EM03i] IEC 61000-3-3 (2005), EN 61000-3-3 (1995) + A2 (2005)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections

[12/EM03ii] IEC 61000-3-3, Edition 1.2 (2005-10)
EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

[12/EM11en] EN 61000-3-11, 1st Ed (2000-08)
EMC - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems -Equipment with rated current <=75A and subject to conditional connection

[12/EM12] IEC 61000-3-12, Rev 04, November 2004
Electromagnetic Compatibility (EMC) - PART 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A

[12/EM12a] IEC 61000-3-12 (2004) & EN 61000-3-12 (2005)
Electromagnetic Compatibility (EMC) - PART 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than or equal to 75 A

[12/EM12b] AS/NZS 61000-3-12 (2006)
Electromagnetic compatibility (EMC) - Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase

[12/EN11] EN 61000-3-11, Rev 01, Feb 2001
Electromagnetic Compatibility (EMC) Limits, Limitation of Voltage Changes, Voltage Fluctuations and Flicker in public low-voltage supply systems - Equipment with rated voltage current < 75 A and subject to conditional connection

[12/F18] FCC OST/MP-5 (1986)
FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment)

[12/FCC11] ANSI C63.4 (2003) with FCC Method - 47 CFR Part 11
Emergency Alert System (EAS)

[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators

[12/FCC15c1] ANSI C63.4 (2003) and Millimeter Wave Test Procedures
IDB 20040420-001 with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators

[12/FCC15c2] DA 00-705 - March 30, 2000 and KDB Pub. No. 558074
with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators - (Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems - and - New Guidance on Measurements for Digital Transmission Systems in Section 15.247)

[12/FCC15c3] KDB Pub. No. 200433 Millimeter Wave Test Procedures
with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators

[12/FCC15d] ANSI C63.17(1998) and ANSI C63.4 (2003)
with FCC Method - 47 CFR Part 15, Subpart D: Unlicensed Personal Communications Service Devices

[12/FCC15e] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Service Devices

[12/FCC15e1] ANSI C63.4 (2003) and DA 02-2138
with FCC Method - CFR Part 15, Subpart E: Unlicensed National Information Infrastructure Service Devices - and - Measurement Procedure Update for Peak Transmit Power

[12/FCC15f] FCC Report and Order ET Docket 98-153 (FCC 02-48)
and procedures in IDB 20021108-001 with FCC Method 47 CFR Part 15, Subpart F: Ultra-Wideband Operation

[12/FCC15g] FCC Part 15.G using FCC Order 04-425
FCC Part 15 Subpart G Access Broadband Over Power Line (Access BPL) using FCC Order, ET Docket No. 04-37, FCC 04-245, Measurement Guidelines for Access Broadband over Power Line (BPL) Systems.

[12/KN11b] KN11 (Annex 3) with RRL Notice No. 2006-126 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Interference; With KN 11 (Annex 3)

[12/KN11c] KN11 (Annex 3) with RRL Notice No. 2006-128 (Dec. 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11 (Annex 3)

[12/KN22] KN22 with RRL Notice No. 2005-82 (Sept. 29, 2005)
RRL Notice No. 2005-82: Technical Requirements for Electromagnetic Interference Annex 8 (KN-22), RRL Notice No. 2005-131: Conformity Assessment Procedures for Electromagnetic Interference

[12/KN22a] KN22 (Annex 8) with RRL Notice No. 2006-128 (Dec. 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)

[12/KN22b] KN22 (Annex 8) with RRL Notice No. 2006-126 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Interference; With KN22 (Annex 8)

[12/KN30] Korea RRL Notice 30 (2004)
Conformity Assessment Procedures for Electromagnetic Interference using KN 16-1, KN 16-2, KN 11, KN 13, KN 14-1, KN 15, KN 19, KN 22, KN 41, and KN 50.

[12/KNcis11] KN11 with RRL Notice No. 2005-82 (Sept. 29, 2005)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/KR126] RRL Notice No. 2006-126 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Interference

[12/KR127a] RRL Notice No. 2006-127 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Susceptibility

[12/KR128] RRL Notice No. 2006-128 (Dec. 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference

[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/VCCIb] Agreement of VCCI V-3 (2006.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2006.04

[12/VCCIc] Agreement of VCCI V-3 (2007.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2007.04

  • Immunity Test Methods

[12/160D20b] RTCA/DO-160 (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20.6: Radio Frequency Susceptibility (Radiated Mode Tuned)

[12/50091c] EN 50091-2: 1999
Uninterruptible power systems (UPS) - Part 2: EMC Requirements

[12/5832] EN 50083-2:2001 + Ammendment 1:2005
Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment

[12/60E15] RTCA DO 160E
Section 15, Magnetic Effects

[12/60E16] RTCA DO160E
Section 16, Power Input

[12/60E17] RTCA DO-160E
Section 17, Voltage Spikes

[12/60E18] RTCA DO-160E
Section 18, Audio Frequency Conducted Susceptibility

[12/60E19] RTCA DO-160E
Section 19, Induced Signal Susceptibility

[12/60E204] RTCA DO-160E
Section 20.4, RF Susceptibility, Conducted

[12/60E205] RTCA DO-160E
Section 20.5, RF Susceptibility, Radiated

[12/60E206] RTCA DO-160E
Section 20.6: RF Susceptability (Radiated Mode Tuned)

[12/60E22] RTCA DO-160E
Section 22, Lightning Induced Transient Susceptibility

[12/60E25] RTCA DO-160E
Section 25, Electrostatic Discharge (ESD)

[12/610006g] IEC 61000-6-2, 1st edition (1999-01)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/610006h] IEC 61000-6-1, 2nd edition (2005-03)
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments

[12/610006i] IEC 61000-6-2, Edition 2.0 (2005-01)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/610006j] EN 61000-6-2 (2005)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments

[12/61000k] EN 61000-6-1 (2007)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments

[12/61326a3] EN 61326 (1998)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/61326f] BS EN 61326-1 (2006)
Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements

[12/61326j] IEC 61326-2-6, Ed. 1.0 (2005-12)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

[12/CIS24a] EN 55024 and CISPR 24 (1997, modified)
Information technology equipment - Immunity characteristics - Limits and methods of measurements

[12/CIS24b] AS/NZS CISPR 24 (2002)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/CIS24c] EN 55024 (1998) and A1 (2001)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/I01] IEC 61000-4-2, Ed. 1.2 (2001); EN 61000-4-2
Electrostatic Discharge Immunity Test

[12/I01b] IEC 61000-4-2 (2001); EN 61000-4-2 (2001), A2 (2001)
Electrostatic Discharge Immunity Test

[12/I01c] EN 61000-4-2 +A1(1998) +A2(2001)
Electrostatic Discharge Immunity Test

[12/I02] IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002)
Radiated Radio-Frequency Electromagnetic Field Immunity Test

[12/I02b] IEC/EN 61000-4-3, Ed. 2.1 (2002), A1 (2002); EN 61000-4-3
Radiated, radio-frequency, electromagnetic field immunity test

[12/I02e] EN 61000-4-3 (2002) + A1(2002) + IS1(2004)
Radiated, radio-frequency, electromagnetic field immunity test

[12/I02f] EN 61000-4-3 (2002) + A1(2002)
Radiated, radio-frequency, electromagnetic field immunity test

[12/I02g] IEC 61000-4-3, Ed. 3.0 (2006-02)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

[12/I03] IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I04aa] IEC 61000-4-5, Ed. 2.0 (2005-11); EN 61000-4-5
Electromagnetic Compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I04b] IEC 61000-4-5 (2001), A1(2000); EN 61000-4-5(2001), A1(2000)
Surge Immunity Test

[12/I04c] IEC 61000-4-5, Ed 1.1 (2005-11)
EMC - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I04d] BS EN 61000-4-5 (2006)

[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I05d] IEC 61000-4-6, Ed. 2.1 (2004); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I05e] EN 61000-4-6 (1996) + A1 (2001)
Immunity to Conducted Disturbances, Induced by Radio Frequency Fields

[12/I05ee] IEC 61000-4-6, Ed. 2.2 (2006-05)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I05f] IEC 61000-4-6, Ed 2.0 (2006-05)
EMC - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

[12/I06b] IEC 61000-4-8 (2001), A1(2000); EN 61000-4-8 (2001),A1(2000)
Power Frequency Magnetic Field Immunity Test

[12/I06c] EN 61000-4-8 (1993) + A1 (2001)
Power Frequency Magnetic Field Immunity Test

[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/I07c] IEC 61000-4-11, Ed. 2 (2004-03) & EN 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

[12/I07e] EN 61000-4-11 (1994), A1 (2001)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/I07f] EN 61000-4-11 (2004)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/I08a] EN 55024 (1998) + A1 (2001) + A2 (2003)
Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement

[12/I12] IEC 61000-4-12 , Edition 1.1 (2001-04)
Testing and Measurement Techniques - Oscillatory Wave Immunity Test

[12/KN11a] KN 61000-4-11 with RRL Notice No. 2005-130 (Dec 27, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/KN132] Korea RRL Notice 132 (october 2005)
Conformity Assessment Procedure for Electromagnetic Susceptibility

[12/KN150] EMS RRL Notice No. 2005-130: 2005.12.27
RRL Notice No. 2005-130: Technical Requirements for Electromagnetic Susceptibility Annex 1-7 (KN61000-4-2, -3, -4, -5, -6, -8, -11), RRL Notice No. 2005-132: Conformity Assessment Procedures for Electromagnetic Susceptibility

[12/KN24] KN24 (December 2005) with RRL Notice No. 2005-83
Information Technology Equipment - immunity charateristics - limits and methods of measurements

[12/KN2a] KN 61000-4-2 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electrostatic Discharge Immunity Test

[12/KN31] Korea RRL Notice No. 31 (2004)
Conformity Assessment Procedures for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN 61000-4-4, KN 61000-4-5, KN 61000-4-8, KN 61000-4-11, KN 20, KN 41, and KN 50.

[12/KN3a] KN 61000-4-3 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Radiated, radio-frequency, electromagnetic field immunity test

[12/KN4a] KN 61000-4-4 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun

[12/KN5a] KN 61000-4-5 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Surge Immunity Test

[12/KN6a] KN 61000-4-6 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances,

[12/KN70] Korea RRL Notice 70 (2004)
Technical Requirements for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN61000-4-4, KN 61000-4-5, KN 61000-4-6, KN 61000-4-8, KN 20, KN 41, and KN 51

[12/KN8a] KN 61000-4-8 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Power Frequency Magnetic Field Immunity Test

  • MIL-STD-462 : Conducted Emissions

[12/A01]
MIL-STD-462 Method CE01

[12/A04]
MIL-STD-462 Method CE02

[12/A06]
MIL-STD-462 Method CE03

[12/A08]
MIL-STD-462 Method CE04

[12/A10]
MIL-STD-462 Method CE06

[12/A12]
MIL-STD-462 Method CE07

[12/A13]
MIL-STD-462 Version D Method CE101

[12/A14]
MIL-STD-462 Version D Method CE102

[12/A15]
MIL-STD-462 Version D Method CE106

[12/A16]
MIL-STD-461 Version E Method CE101

[12/A17]
MIL-STD-461 Version E Method CE102

[12/A18]
MIL-STD-461 Version E Method CE106

[12/A19]
MIL-STD-461 Version F Method CE101

[12/A20]
MIL-STD-461 Version F Method CE102

[12/A21]
MIL-STD-461 Version F Method CE106

  • MIL-STD-462 : Conducted Susceptibility

[12/B01]
MIL-STD-462 Method CS01

[12/B02]
MIL-STD-462 Method CS02

[12/B04]
MIL-STD-462 Method CS03/CS04/CS05/CS08

[12/B05]
MIL-STD-462 Method CS06

[12/B06]
MIL-STD-462 Method CS07

[12/B07]
MIL-STD-462 Method CS09

[12/B08]
MIL-STD-462 Method CS10

[12/B09]
MIL-STD-462 Method CS11

[12/B10]
MIL-STD-462 Method CS12

[12/B11]
MIL-STD-462 Method CS13

[12/B12]
MIL-STD-462 Version D Method CS101

[12/B13]
MIL-STD-462 Version D Method CS103

[12/B14]
MIL-STD-462 Version D Method CS104

[12/B15]
MIL-STD-462 Version D Method CS105

[12/B16]
MIL-STD-462 Version D Method CS109

[12/B17]
MIL-STD-462 Version D Method CS114

[12/B18]
MIL-STD-462 Version D Method CS115

[12/B19]
MIL-STD-462 Version D Method CS116

[12/B20]
MIL-STD-461 Version E Method CS101

[12/B21]
MIL-STD-461 Version E Method CS103

[12/B22]
MIL-STD-461 Version E Method CS104

[12/B23]
MIL-STD-461 Version E Method CS105

[12/B24]
MIL-STD-461 Version E Method CS109

[12/B25]
MIL-STD-461 Version E Method CS114

[12/B26]
MIL-STD-461 Version E Method CS115

[12/B27]
MIL-STD-461 Version E Method CS116

[12/B28]
MIL-STD-461 Version F Method CS101

[12/B29]
MIL-STD-461 Version F Method CS103

[12/B30]
MIL-STD-461 Version F Method CS104

[12/B31]
MIL-STD-461 Version F Method CS105

[12/B32]
MIL-STD-461 Version F Method CS106

[12/B33]
MIL-STD-461 Version F Method CS109

[12/B34]
MIL-STD-461 Version F Method CS114

[12/B35]
MIL-STD-461 Version F Method CS115

[12/B36]
MIL-STD-461 Version F Method CS116

  • MIL-STD-462 : Radiated Emissions

[12/D01]
MIL-STD-462 Method RE01

[12/D02]
MIL-STD-462 Method RE02

[12/D03]
MIL-STD-462 Method RE03

[12/D04]
MIL-STD-462 Version D Method RE101

[12/D05]
MIL-STD-462 Version D Method RE102

[12/D06]
MIL-STD-462 Version D Method RE103

[12/D07]
MIL-STD-461 Version E Method RE101

[12/D08]
MIL-STD-461 Version E Method RE102

[12/D09]
MIL-STD-461 Version E Method RE103

[12/D10]
MIL-STD-461 Version F Method RE101

[12/D11]
MIL-STD-461 Version F Method RE102

[12/D12]
MIL-STD-461 Version F Method RE103

  • MIL-STD-462 : Radiated Susceptibility

[12/E01]
MIL-STD-462 Method RS01

[12/E02]
MIL-STD-462 Method RS02

[12/E03]
MIL-STD-462 Method RS03 (Consult laboratory for field strengths available)

[12/E04]
MIL-STD-462 Method RS03 employing RADHAZ procedures for high level testing (Consult laboratory for field strengths available)

[12/E07]
MIL-STD-462 Method RS06

[12/E08]
MIL-STD-462 Version D Method RS101

[12/E09]
MIL-STD-462 Version D Method RS103

[12/E11]
MIL-STD-461 Version E Method RS101

[12/E12]
MIL-STD-461 Version E Method RS103

[12/E14]
MIL-STD-461 Version F Method RS01

[12/E15]
MIL-STD-461 Version F Method RS101

[12/E16]
MIL-STD-461 Version F Method RS103

  • Product Safety Test Methods

[12/60601a] IEC 60601-1-2, Ed1(1993);Ed2(2001-09); JIS T0601-1-2(2002.7)
Medical electrical equipment - Part 1 and Part 1-2: General requirements for safety: Collateral standard: EMC - Requirements and tests

[12/60601h] EN 60601-1-2 (2001)
Medical electrical equipment - Part 1 and Part 1-2: General requirements for safety: Collateral standard: EMC - Requirements and tests

[12/60601hh] EN 60601-1-2 (2001) + A1(2006)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: EMC - Requirements and tests

  • Radio Test Methods

[12/300220d] ETSI EN 300 220-1 V2.1.1 (2006-04)
Electromagnetic Compatibility Radio Spectrum Matters; Short Range Devices; Radio Equipment to be used in the 25 MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 500mW; Part 1: Technical Characteristics and Test Methods

[12/300220f] ETSI EN 300 220-2 V2.1.2 (2007-06)
ERM; Short Range Devices; Radio Equipment to be used in the 25MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 550 mW; Part 2: Supplementary Parameters Not Intended for Conformity Purposes

[12/300328f] ETSI EN 300 328 V1.6.1 (2004-07)
ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300328g] ETSI EN 300 328 V1.7.1 (2006-10)
ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300330c] ETSI EN 300 330-1 V1.5.1 (2006-04)
ERM; Short Range Devices; Radio Equipment in the Frequency Range 9kHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9kHz to 30 MHz; Part 1: Technical Characteristics and Test Methods

[12/300330d] ETSI EN 300 330-2 V1.3.1 (2006-04)
ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive

[12/300440d] ETSI EN 300 440-2 v1.2.1 (2008-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

[12/300440e] ETSI EN 300 440-1 v1.4.1 (2008-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods

[12/300440f] ETSI EN 300 440-1 v1.5.1 (2009-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods

[12/300440g] ETSI EN 300 440-2 v1.2.1 (2009-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive

[12/301489a] ETSI EN 301 489-1 v1.5.1 (2004-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

[12/301489b] ETSI EN 301 489-3 v1.4.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz

[12/301489f] ETSI EN 301 489-7 v1.2.1 (2002-08)
ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)

[12/301489g] ETSI EN 301 489-8 v1.2.1 (2002-08)
ElectroMagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations

[12/301489m] ETSI EN 301 489-17 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

[12/301489p] ETSI EN 301 489-20 v1.2.1 (2002-11)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS)

[12/301489x] ETSI EN 301 489-12 v1.2.1 (2003-05)
ERM; EMC standard for radio equipment and services; Part 12: Specific conditions for Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)

[12/301489z] ETSI EN 301 489-1 v1.6.1 (2005-09)
ERM; ElectroMagnetic Compatability (EMC) Standard for Radio Equipment and Services; Common Technical Requirements

[12/3148928] EN 301 489-28, version 1.1.1 (2004-07)
ERM; EMC Standard for radio equipment and services - Part 28: Specific conditions for wireless digital video links

[12/31489aa] ETSI EN 301 489-1 V1.7.1 (2006-07)
ERM; ElectroMagnetic Compatibilty (EMC); Standard for Radio Equipment and Services; Part 1: Common Technical Requirements

[12/31489ab] ETSI EN 301 489-2 V1.3.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 2: Spesific requirements for radio paging equipment

[12/31489ac] ETSI EN 301 489-1 V1.8.1 (2008-04)
ERM; ElectroMagnetic Compatibilty (EMC); Standard for Radio Equipment and Services; Part 1: Common Technical Requirements

[12/31489fa] ETSI EN 301 489-7 v1.3.1 (2005-11)
ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for moble and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)

[12/31489m] ETSI EN 301 489-17 v1.3.2 (2008-04)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

[12/31489x] ETSI EN 301 489-12 v2.2.2 (2008-09)
ERM; EMC standard for radio equipment and services; Part 12: Specific conditions for Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS)

[12/322081b] ETSI EN 302 208-1 V1.2.1 (2008-04)
ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement

[12/322082] EN 302 208-2 v1.1.1 (2004-09)
ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive

[12/399328f] ETSI EN 300 328 V1.6.1 (2004-07)
ERM; Wideband Transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/48927] ETSI EN 301 489-27 V1.1.1 (2004-06)
ERM; EMC standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheal devices (ULP-AMI-P)

[12/RSS102] RSS-102, Issue 2 (November 12, 2005)
using IEEE 1528 and/or IEEE C95.3 - Evaluation Procedure for Mobile and Portable Radio Transmiters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields

[12/RSS118d] RSS-118, Amendment #2, Issue 2, (August 24 1996)

[12/RSS119a] RSS-119, Issue 8 (September, 2006)
Land Mobile and Fixed Radio Transmitters and Receivers, 27.41 to 960 MHz

[12/RSS123] RSS-123, Issue 1, Rev. 2 (November 6, 1999)
Low Power Licensed Radiocommunication Devices

[12/RSS128] RSS-128 (November 6, 1999)
800 MHz Dual-Mode TDMA Cellular Telephones

[12/RSS129] RSS-129, Issue 2 (September 25, 1999)
800 MHz Dual-Mode CDMA Cellular Telephones

[12/RSS129a] RSS-129, Issue 2 (September 25, 1999)
800 MHz Dual-Mode CDMA Cellular Telephones - (limited to TX conducted and radiated power and RX - TX radiated spurious emissions)

[12/RSS130] RSS-130, Issue 2 (January 23, 1993)
Digital Cordless Telephones in the Band 944 to 948.5 MHz

[12/RSS130a] RSS-130, Annex 1, Issue 2 (January 23, 1993) - CT2Plus Class
Specification for the Canadian Common Air Interface for Digital Cordless Telephony, Including Public Access Services

[12/RSS130b] RSS-130, Attachment 1 (January 23, 1993)
European Telecommunications Standards Institute Interim Standard #1-ETS300131 (April 1992) Radio Equipment and System Common Air Interface Specification to be Used for the Interworking between Cordless Telephone Apparatus 864.1 to 868.1 MHz

[12/RSS132] RSS-132, Issue 2 (September 2005)
Cellular Telephones Employing New Technologies Operating in the Bands 824 - 849 MHz and 869 - 894 MHz

[12/RSS133] RSS-133, Issue 3 (June 2005)
2GHz Personal Communications Services

[12/RSS133a] RSS-133, Issue 2, Rev 1 (November 6, 1999)
2GHz Personal Communications Services - (limited to TX conducted and radiated power and RX - TX radiated spurious emissions)

[12/RSS134] RSS-134, Issue 1, Rev. 1 (March 25, 2000)
900 MHz Narrowband Personal Communication Service

[12/RSS137] RSS-137, Issue 1, Rev. 1 (September 25, 1999)
Location and Monitoring Service (902 - 928 MHz)

[12/RSS139] RSS-139, Isssue 1 (February 5, 2008)

[12/RSS170] RSS-170, Issue 1, Rev. 1 (November 6, 1999)
Satellite Mobile Earth Stations

[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment

[12/RSS212] RSS-212, Issue 1 (February 27, 1999)
Test Facilities and Test Methods for Radio Equipment

[12/RSS213] RSS-213, Issue 1 (April 24, 1999)
2 GHz Licence-Exempt Personal Communications Service Devices (PCS)

[12/RSS243] RSS-243, Issue 2 (November 12, 2005)
Active Medical Implant Communications System Devices in the 402 - 405 MHz Band

[12/RSS310a] RSS-310, Issue 2 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment

[12/RSSG2] RSS-Gen, Issue 2 (June 2007)
General Requirements and Information for the Certification of Radiocommunication Equipment

  • Telecommunications Test Methods

[12/FCC2a1] TIA/EIA 603-C (2004) with 47 CFR Part 2
Personal Mobile Radio Services in 47 CFR Part 22 (cellular) and Part 24 - (limited to TX conducted and radiated power and RX - TX radiated spurious emissions)

[12/FCC2b] TIA/EIA 603-C (2004) with 47 CFR Part 2
General Mobile Radio Services in 47 CFR Parts 22 (non-cellular), 74, 90, 95, and 97

Return to NVLAP Program Listing


Return to top of page NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP
Return to top of page

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: November 1, 2009

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA