Professional Testing (EMI), Inc.
NVLAP Lab Code: 200062-0
Address and Contact Information:
1601 N. A.W. Grimes Blvd.Suite B
Round Rock, TX 78665
Contact: Mr. Robert McCollough
Phone: 512-244-3371
Fax: 512-244-1846
E-Mail: rmccollough@ptitest.com
Send E-Mail to Laboratory: Professional Testing (EMI), Inc.
URL: http://www.ptitest.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.Send E-Mail to NVLAP at: NVLAP@nist.gov
Electromagnetic Compatibility & Telecommunications
Accreditation Valid From: January 1, 2012 Through: December 31, 2012
[12/C01]
MIL-STD-462 Version C Method CE01
- Emissions Test Methods
[12/100063c] IEC 61000-6-3 (1996), EN 61000-6-3 (2001), A1 (2004)
Electromagnetic Compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial, and light-industrial environments.
[12/11451b] ISO 11451-2 (2005)
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources
[12/11451d] ISO 11451-4 (2006)
Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI)
[12/1399-30] MIL-STD 1399 Section 300A
Interface standard for Shipboard Systems: Electric Power, Alternating Current
[12/160D21] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emission of Radio Frequency Energy
[12/160F21] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emissions of Radio Frequency Energy
[12/50121cc] EN 50121-3-2 (2006)
Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus
[12/55103a] EN 55103-1 (1996)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
[12/55103c] BS EN 55103-1 (1997)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1. Emission
[12/55103f] EN 55103-1 (2009)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
[12/60533] IEC 60533 Ed. 2.0 (1999-11)
Electrical and electronic installations in ships - Electromagnetic compatibility
[12/60E213] RTCA DO-160E
Section 21.3, RF Emissions, Conducted
[12/60E214] RTCA DO-160E
Section 21.4, RF Emissions, Radiated
[12/610006c] EN 61000-6-3 (2001) and IEC 61000-6-3 (1996)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
[12/610006d] EN 61000-6-4 (2001) and IEC 61000-6-4 (1997)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
[12/610006m] EN 61000-6-4 (2007)
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments
[12/610006p] IEC 61000-6-3 (2006-06)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
[12/61000g] EN 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments
[12/61000h] AS/NZS 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Generic standards - Emission standard for residential, commercial and light-industrial environments
[12/61326d] IEC 61326-1 (2005-12)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/61326n] EN 61326-2-6 (2006) and IEC 61326-2-6 (2005)
Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipment
[12/61967a] IEC 61967-4 (2002) + A1 (2006)
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions
[12/61967b] IEC 61967-2 (2005-09)
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 2: Measurement of radiated emissions - TEM cell and wideband TEM cell method
[12/7637-1] ISO 7637-1, First edition (1990)
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical transient conduction along supply lines only
[12/7637-2] ISO 7637-2, First edition (1990)
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only
[12/7637-2a] ISO 7637-2, Second edition (2004) + A1 (2008)
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
[12/7637-3] ISO 7637-3, 1st Edition (1995-07-15)
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
[12/7637a] ISO 7637-1, 2nd Edition (2002-03-15)
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations
[12/7637aa] ISO 7637-1 (2002) +A1 (2008)
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations
[12/7637b] ISO 7637-2, Second edition (2004)
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only
[12/7637c] ISO 7637-3 (1995) Technical Corrigendum 1
Road vehicles - Electrical distrubance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
[12/7637d] ISO 7637-3 (2007)
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
[12/CIS11d] EN 55011 (1998), A1 (1999), A2 (2002)
Industrial, Scientific and Medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11f] AS/NZS CISPR 11 (2002)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11g] IEC/CISPR 11, Ed. 4.1 (2004-06)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurements
[12/CIS11h] AS/NZS CISPR 11 (2004)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11h1] AS/NZS CISPR 22:2006
Information technology equipment-Radio disturbance characteristics-Limits and methods of measurement
[12/CIS11i] IEC/CISPR 11, Ed. 4.1 (2004-06) + A1(2004)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11j] EN 55011 (1998) + A1(1999), A2(2002)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11k] IEC/CISPR 11 (2003), EN 55011 (1998), A2(2002)
Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipment
[12/CIS11p] IEC/CISPR 11 Ed. 5 (2009-05)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[12/CIS11pp] IEC/CISPR 11 Ed 5 (2009-05) + A1 (2010)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[12/CIS13c] CISPR 13 (2003) + Amdt 1(2003) & AS/NZS CISPR 13 (2004)
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS14a4] EN 55014-1 (2006)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14b1] AS/NZS CISPR 14-1 (2003)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14x] IEC/CISPR 14-1, Ed. 4 (2003)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14x1] IEC/CISPR 14-1, Ed. 5.0 (2005)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission
[12/CIS14x2] IEC/CISPR 14-1, Ed. 5.1 (2009)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission
[12/CIS22] IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment
[12/CIS22a] IEC/CISPR 22 (1993) and EN 55022 (1994)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996)
[12/CIS22a1] IEC/CISPR 22 (1997) A1(2002); EN55022(1998)A1(2000),A2(2003)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment
[12/CIS22a2] IEC/CISPR 22 (1997), A1(2000), A1(2002)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/CIS22a3] EN 55022 (1998), A1(2000), A2(2003)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/CIS22a4] IEC/CISPR 22 (1993) & EN 55022 (1994)+A1(1995), A2(1997)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment
[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
[12/CIS22c1] IEC/CISPR 22, Edition 5 (2005) and EN 55022 (1998)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22c3] IEC/CISPR 22, Edition 5 (2005) + A1(2005)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22c4] EN 55022 (1998) + A1(2000) + A2(2003)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22g] IEC/CISPR 22, Edition 5 (2005-04) and EN 55022 (2006)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/CIS22i] IEC/CISPR 22, Edition 5.2 (2006-03)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/CIS22j1] EN 55022 (2006) + A1 (2007)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22k] IEC/CISPR 22 (2008-09)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/CIS25b] IEC/CISPR 25, 2nd ed. (2002-08)
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices – Limits and methods of measurement: Sections 6.2, 6.3, 6.4, & 6.5
[12/CIS25c] IEC/CISPR 25, Ed. 3.0 (2008-03)
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices – Limits and methods of measurement
[12/DS59411] Defense Standard 59-411 Part 3 Issue 1:2007 + Amdt 1
Electromagnetic Compatibility Test Methods and Limits for Equipment and Sub Systems
[12/EM02d] IEC 61000-3-2, Edition 2.2 (2004-11)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
[12/EM02ee] AS/NZS 61000-3-2 (2007)
Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input current (16 A per phase) (IEC 61000-3-2, Ed. 3.0 (2005) MOD)
[12/EM02i] IEC 61000-3-2, Ed. 3.0 (2005-11)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)
[12/EM02ii] IEC 61000-3-2, Ed. 3.0 (2005) +A1 (2008) +A2 (2009)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)
[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
[12/EM03b] IEC 61000-3-3, Edition 1.1(2002-03) & EN 61000-3-3, A1(2001)
EMC - Part 3-3: Limits - Limitations of voltage changes, voltage flucuations and flicker, in public low-voltage supply-systems, for equipment with rated current <=16 A per phase and not subject to conditional connections
[12/EM03g] IEC 61000-3-3, Edition 1.1 (2003) +A2 (2005)
EMC Part 3-3: Limits - Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connections
[12/EM03m] EN 61000-3-3, Ed. 2.0 (2008-09)
EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
[12/EM03n] IEC 61000-3-3 Ed. 2.0 (2008)
EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current =16 A per phase and not subject to conditional connection
[12/F18] FCC OST/MP-5 (1986)
FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment)
[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators
[12/FCC15bb] ANSI C63.4 (2009) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators
[12/FCC15c] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators
[12/FCC15c1] ANSI C63.4 (2003) and Millimeter Wave Test Procedures
IDB 20040420-001 with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators
[12/FCC15c2] DA 00-705 - March 30, 2000 and KDB Pub. No. 558074
with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators - (Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems - and - New Guidance on Measurements for Digital Transmission Systems in Section 15.247)
[12/FCC15c3] KDB Pub. No. 200433 Millimeter Wave Test Procedures
with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators
[12/FCC15cc] ANSI C63.4 (2009) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators
[12/FCC15e] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Service Devices
[12/FCC15e1] ANSI C63.4 (2003) and DA 02-2138
with FCC Method - CFR Part 15, Subpart E: Unlicensed National Information Infrastructure Service Devices - and - Measurement Procedure Update for Peak Transmit Power
[12/FCC15e3] ANSI C63.4 (2009) and DA 02-2138
with FCC Method - CFR Part 15, Subpart E: Unlicensed National Information Infrastructure Service Devices - and - Measurement Procedure Update for Peak Transmit Power
[12/FCC15ee] ANSI C63.4 (2009) with FCC Method 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Service Devices
[12/ICES003] ICES-003 Issue 4 (2004)
Implementation and Interpretation of the Interference-Causing Equipment Standard for Digital Apparatus. (Industry Canada)
[12/ICES1a] ICES-001 Issue 4 (2006)
Industrial, Scientific and Medical (ISM) Radio Frequency Generators
[12/IEE299c] IEEE Std 299 (2006)
Measuring the Effectiveness of Electromagnetic Shielding Enclosures
[12/KN22d1] KN22 (Annex 8) with RRA Announce 2008-11 (Dec. 16, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)
[12/KN22d2] KN22 (Annex 8) with RRA Announce 2009-9 (Dec. 21, 2009)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)
[12/KN30] Korea RRL Notice 30 (2004)
Conformity Assessment Procedures for Electromagnetic Interference using KN 16-1, KN 16-2, KN 11, KN 13, KN 14-1, KN 15, KN 19, KN 22, KN 41, and KN 50.
[12/KR126] RRL Notice No. 2006-126 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Interference
[12/KR127a] RRL Notice No. 2006-127 (Dec. 29, 2006)
Technical Requirements for Electromagnetic Susceptibility
[12/KR128] RRL Notice No. 2006-128 (Dec. 29, 2006)
Conformity Assessment Procedure for Electromagnetic Interference
[12/KR129] RRL Notice No. 2006-129 (Dec. 29, 2006)
Conformity Assessment Procedure for Electronic Susceptibility
[12/MIL704] MIL-STD-704 (1959)
Aircraft Electrical Power Characteristics
[12/MIL704a] MIL-STD-704, Revision A (August 9, 1996)
Aircraft Electrical Power Characteristics
[12/MIL704b] MIL-STD-704, Revision B (November 17,1975)
Aircraft Electrical Power Characteristics
[12/MIL704c] MIL-STD-704, Revision C (December 30, 1977
Aircraft Electrical Power Characteristics
[12/MIL704d] MIL-STD-704 Revision D (September 30, 1980)
Aircraft Electrical Power Characteristics
[12/MIL704e] MIL-STD-704, Revision E (May 1, 1992)
Aircraft Electrical Power Characteristics
[12/MIL704f] MIL-STD-704 Revision F (March 12, 2004)
Aircraft, Electric Power Characteristics
[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/T51b1] AS/NZS CISPR 22 (2009)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/TCVN] TCVN 7189:2002 (CISPR 22:1997)
Information Technology Equipment-Radio disturbance characteristics-Limits and methods of measurement
[12/VCCIa] VCCI
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2005.04
[12/VCCIb] Agreement of VCCI V-3 (2006.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2006.04
[12/VCCIc] Agreement of VCCI V-3 (2007.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2007.04
[12/VCCId] Agreement of VCCI V-3 (2008.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2008.04
[12/VCCIe] Agreement of VCCI V-3 (2009.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2009.04 (radiated disturbance above 1 GHz)
[12/VCCIf] Agreement of VCCI V-3 (2010.04)
Agreement of VCCI Council - Technical Requirements: V-3/2010.04 (including radiated disturbance above 1 GHz)
[12/VCCIg] Agreement of VCCI V-3 (2011.04)
Agreement of VCCI Council - Technical Requirements: V-3/2011.04 (including radiated disturbance above 1 GHz)
- General MIL Standards (Non 462)
[12/MS167] MIL-STD-167 rev. 74 (June 19, 1987)
[12/MS202] MIL-STD-202 rev. G (July 18, 2003)
Sections 103B, 107G, 201A, 213B, and 214A
- Immunity Test Methods
[12/06IACS] IACS Req. 2006 Clause 13, 14, 15, 16, 17, 18, 19
International Association of Classification Societies-concerning Electrical Installations-E10: Test Specification for Type Approval
[12/11452a] ISO 11452-1 (2005)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology
[12/11452b] ISO 11452-2 (2004)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure
[12/11452c] ISO 11452-3 (2001)
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell
[12/11452d] ISO 11452-4 (2001)
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)
[12/11452f] ISO 11452-4 (2005)
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)
[12/1275C] MIL-STD-1275C
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
[12/160D05] RTCA/DO-160D (19997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 5: Temperature
[12/160D06] RTCA/DO 160-D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 6: Humidity
[12/160D15] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect
[12/160D16] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input
[12/160D17] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike
[12/160D18] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Susceptibility - Power Inputs
[12/160D19] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility
[12/160D20] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)
[12/160D20b] RTCA/DO-160 (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20.6: Radio Frequency Susceptibility (Radiated Mode Tuned)
[12/160D22] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility
[12/160D25] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)
[12/160F15] RTCA/DO 160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect
[12/160F16] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input
[12/160F17] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike
[12/160F18] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Suspceptibility - Power Inputs
[12/160F19] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility
[12/160F20] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)
[12/160F22] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility
[12/160F25] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)
[12/55103b] EN 55103-2 (1996)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity
[12/55103d] BS EN 55103-2 (1997)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2. Immunity
[12/55103e] EN 55103-2 (2009)
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity
[12/60945a] EN 60945 (2002)
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
[12/60E15] RTCA DO 160E
Section 15, Magnetic Effects
[12/60E16] RTCA DO160E
Section 16, Power Input
[12/60E17] RTCA DO-160E
Section 17, Voltage Spikes
[12/60E18] RTCA DO-160E
Section 18, Audio Frequency Conducted Susceptibility
[12/60E19] RTCA DO-160E
Section 19, Induced Signal Susceptibility
[12/60E204] RTCA DO-160E
Section 20.4, RF Susceptibility, Conducted
[12/60E205] RTCA DO-160E
Section 20.5, RF Susceptibility, Radiated
[12/60E22] RTCA DO-160E
Section 22, Lightning Induced Transient Susceptibility
[12/60E25] RTCA DO-160E
Section 25, Electrostatic Discharge (ESD)
[12/610006a] EN 61000-6-1 (2001)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments
[12/610006b] EN 61000-6-2 (2001)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/610006h] IEC 61000-6-1, 2nd edition (2005-03)
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments
[12/610006i] IEC 61000-6-2, Edition 2.0 (2005-01)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/610006j] EN 61000-6-2 (2005)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/61000k] EN 61000-6-1 (2007)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments
[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/CIS16b3] CISPR 16-2-3 (2006) Ed. 2
Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods-Part 2-3: Methods of measurement of disturbance and immunity-Radiated disturbance measurement
[12/CIS16b4] CISPR 16-2-4 (2003)
Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods - Part 2-4: Methods of measurement of disturbance and immunity-Immunity measurements
[12/CIS16c1] CISPR 16-2-1 Ed. 2.0 (2008)
Specification for Radio Disturbance and Immunity Measuring Apparatus and Methods-Part 2-1: Methods of measurement of disturbance and immunity -Conducted disturbance measurements
[12/CIS16c2] CISPR 16-2-2 Ed. 1.2 (2005)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
[12/CIS24] IEC/CISPR 24 (1997) A2(2002) & EN 55024 (1998) A2(2003)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/CIS24b] AS/NZS CISPR 24 (2002)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/DO160E] RTCA DO-160E (December 9, 2004)
Environmental Conditions and Test Procedures for Airborne Equipment
[12/I01] IEC 61000-4-2, Ed. 1.2 (2001); EN 61000-4-2
Electrostatic Discharge Immunity Test
[12/I01b] IEC 61000-4-2 (2001); EN 61000-4-2 (2001), A2 (2001)
Electrostatic Discharge Immunity Test
[12/I01c] EN 61000-4-2 +A1(1998) +A2(2001)
Electrostatic Discharge Immunity Test
[12/I01d] IEC 61000-4-2, Ed. 2.0 (2008-12)
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
[12/I01f] EN 61000-4-2 (2009-05)
Electromagnetic compatibility (EMC) — Part 4-2 : Testing and measurement techniques — Electrostatic discharge immunity test
[12/I02] IEC 61000-4-3, Ed. 2.0 (2002-03); EN 61000-4-3 (2002)
Radiated Radio-Frequency Electromagnetic Field Immunity Test
[12/I02b] IEC/EN 61000-4-3, Ed. 2.1 (2002), A1 (2002); EN 61000-4-3
Radiated, radio-frequency, electromagnetic field immunity test
[12/I02e] EN 61000-4-3 (2002) + A1(2002) + IS1(2004)
Radiated, radio-frequency, electromagnetic field immunity test
[12/I02f] EN 61000-4-3 (2002) + A1(2002)
Radiated, radio-frequency, electromagnetic field immunity test
[12/I02ggg] IEC 61000-4-3, Ed. 3.0 (2006-02) + A1 (2007) + A2 (2010)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I02hh] EN 61000-4-3 (2006) +A1 (2008)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio- Frequency, electromagnetic field immunity test
[12/I02i] IEC 61000-4-3, Ed. 3.1 (2008-04)
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I03] IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I03e1] EN 61000-4-4:2004+A1:2010
Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test
[12/I03g] IEC 61000-4-4, Ed. 2.0 + A1 (2010)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I04aa] IEC 61000-4-5, Ed. 2.0 (2005-11); EN 61000-4-5
Electromagnetic Compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I04b] IEC 61000-4-5 (2001), A1(2000); EN 61000-4-5(2001), A1(2000)
Surge Immunity Test
[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I05d] IEC 61000-4-6, Ed. 2.1 (2004); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I05e] EN 61000-4-6 (1996) + A1 (2001)
Immunity to Conducted Disturbances, Induced by Radio Frequency Fields
[12/I05f1] IEC 61000-4-6 Ed. 3.0 (2008)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I05j] EN 61000-4-6 (2009)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[12/I06b] IEC 61000-4-8 (2001), A1(2000); EN 61000-4-8 (2001),A1(2000)
Power Frequency Magnetic Field Immunity Test
[12/I06c] EN 61000-4-8 (1993) + A1 (2001)
Power Frequency Magnetic Field Immunity Test
[12/I06e] IEC 61000-4-8 (2009)
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[12/I06f] EN 61000-4-8:2010
Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test
[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/I07c] IEC 61000-4-11, Ed. 2 (2004-03) & EN 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
[12/I07e] EN 61000-4-11 (1994), A1 (2001)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/I07f] EN 61000-4-11 (2004)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/I08] IEC/CISPR 24 (1997), Amd1, A1(2001); EN 55024 (1998)
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/I08a] EN 55024 (1998) + A1 (2001) + A2 (2003)
Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement
[12/IEC416] IEC 61000-4-16, Edition 1.1 (2002-07)
EMC - Part 4-16: Testing and Measurement Techniques - Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz
[12/IEC417] IEC 61000-4-17, Edition 1.1 (2002-07)
EMC - Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input Power Port Immunity Test
[12/IEC421] IEC 61000-4-21, 1st Edition (2003-08)
EMC-Part 4-21: Testing and measurement techniques Reverberation chamber test methods
[12/J111301] SAE J1113/1 (2006-10)
Procedures and Limits for Components of Vehicles, Boats, and Machines (except Aircraft)
[12/J111304] SAE J1113-4 (2004-08)
Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method
[12/J111312] SAE J1113-12 (2006-08)
Electrical Interference by Conduction and Coupling
[12/J111313] SAE J1113-13 (2004-11)
Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 - Immunity to Electrostatic Discharge
[12/J11131a] SAE J1113-11 (2007-06)
Immunity to Conducted Transients on Power Leads
[12/J111326] SAE J1113-26 (2006-05)
Immunity to AC Power Line Electric Fields
[12/J11132a] SAE J1113-2 (2004-07)
Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft)-Conducted Immunity, 15 Hz to 250 kHz-All Leads
[12/J111342] SAE J1113-42 (2006-10)
EMT-Component Test Procedure - Part 42- Conducted Transient Emission
[12/J1113a] SAE J1113-21 (2005-10)
Immunity to Electromagnetic Fields, Absorber Lined Chamber
[12/KN11a] KN 61000-4-11 with RRL Notice No. 2005-130 (Dec 27, 2005)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/KN11e] KN 61000-4-11 (Annex 7); RRL No. 2007-101 (Dec. 26, 2007)
Conformity Assessment Procedure for Electromagnetic Interference
[12/KN11f1] KN 61000-4-11 (Annex 7) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Voltage Dips, Short Interruptions and Voltage Variations Immunity tests)
[12/KN132] Korea RRL Notice 132 (october 2005)
Conformity Assessment Procedure for Electromagnetic Susceptibility
[12/KN150] EMS RRL Notice No. 2005-130: 2005.12.27
RRL Notice No. 2005-130: Technical Requirements for Electromagnetic Susceptibility Annex 1-7 (KN61000-4-2, -3, -4, -5, -6, -8, -11), RRL Notice No. 2005-132: Conformity Assessment Procedures for Electromagnetic Susceptibility
[12/KN24] KN24 (December 2005) with RRL Notice No. 2005-83
Information Technology Equipment - immunity charateristics - limits and methods of measurements
[12/KN24d1] KN 24 (Annex 11) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Information technology equipment – Immunity characteristics – Limits and methods of measurement)
[12/KN24d2] KN 24 (Annex 11) RRA Announce 2009-10 (Dec. 21, 2009)
Conformity Assessment Procedure for EMS (Information technology equipment – Immunity characteristics – Limits and methods of measurement)
[12/KN2a] KN 61000-4-2 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electrostatic Discharge Immunity Test
[12/KN2b] KN 61000-4-2 (Annex 1);RRL Notice No. 2007-101(Dec. 26 2007)
Electrostatic Discharge Immunity Test
[12/KN2d1] KN 61000-4-2 (Annex 1); RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Precedure for EMS (Electrostatic Discharge Immunity Test)
[12/KN31] Korea RRL Notice No. 31 (2004)
Conformity Assessment Procedures for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN 61000-4-4, KN 61000-4-5, KN 61000-4-8, KN 61000-4-11, KN 20, KN 41, and KN 50.
[12/KN3a] KN 61000-4-3 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Radiated, radio-frequency, electromagnetic field immunity test
[12/KN3b] KN 61000-4-3 (Annex 2); RRL Notice No. 2007-101(Dec.26,2007)
Radiated, radio-frequency, electromagnetic field immunity test
[12/KN3c1] KN 61000-4-3 (Annex 2) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Radiated, radio-frequency, electromagnetic field immunity test)
[12/KN4a] KN 61000-4-4 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immun
[12/KN4b] KN 61000-4-4 (Annex 3); RRL No. 2007-101 (Dec. 26, 2007)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test
[12/KN4c1] KN 61000-4-4 (Annex 3) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Electrical Fast Transient/Burst test)
[12/KN5a] KN 61000-4-5 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Surge Immunity Test
[12/KN5b] KN 61000-4-5 (Annex 4); RRL No. 2007-101 (Dec. 26, 2007)
Surge Immunity Test
[12/KN5c1] KN 61000-4-5 (Annex 4) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Surge Immunity Test)
[12/KN6a] KN 61000-4-6 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances,
[12/KN6b] KN 61000-4-6 (Annex 5); RRL No. 2007-101 (Dec. 26, 2007)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/KN6c1] KN 61000-4-6 (Annex 5); RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Conducted disturbances, induced by radio-frequency fields test)
[12/KN70] Korea RRL Notice 70 (2004)
Technical Requirements for Electromagnetic Susceptibility using KN 61000-4-2, KN 61000-4-3, KN61000-4-4, KN 61000-4-5, KN 61000-4-6, KN 61000-4-8, KN 20, KN 41, and KN 51
[12/KN8a] KN 61000-4-8 with RRL Notice No. 2005-130 (Dec. 27, 2005)
Power Frequency Magnetic Field Immunity Test
[12/KN8b] KN 61000-4-8 (Annex 6); RRL No. 2007-101 (Dec. 26, 2007)
Power Frequency Magnetic Field Immunity Test
[12/KN8c1] KN 61000-4-8 (Annex 6) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Power Frequency Magnetic Field Immunity Test)
[12/M1275A] MIL-STD-1275A
Characteristics of 28 Volts DC Electrical Systems in Military Vehicles
[12/M1275A1] MIL-STD-1275A Notice 1
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
[12/M1275A2] MIL-STD-1275A Notice 2
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
[12/M1275B1] MIL-STD-1275B Notice 1
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
[12/M1275D] MIL-STD-1275D
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
[12/M1275b] MIL-STD-1275B (November 20, 1997)
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles
[Z200062-1] Exclusions
12/I02i: IEC 61000-4-3 Ed. 3.1 (2008-04) - uniform field analysis up to 3GHz.
- MIL-STD Test Methods
[12/1399a] MIL-STD1399 Section 070
Interface standard for shipboard systems, Section 070 - Part 1- DC Magnetic Field Environment
[12/C03]
MIL-STD-462 Version C Method CE03
[12/C06]
MIL-STD-462 Version C Method CE06
[12/C07]
MIL-STD-462 Version C Method CE07
[12/C10]
MIL-STD-462 Version C Method CS01
[12/C11]
MIL-STD-462 Version C Method CS02
[12/C12]
MIL-STD-462 Version C Method CS03
[12/C13]
MIL-STD-462 Version C Method CS04
[12/C14]
MIL-STD-462 Version C Method CS05
[12/C15]
MIL-STD-462 Version C Method CS06
[12/C16]
MIL-STD-462 Version C Method CS09
[12/C17]
MIL-STD-462 Version C Method CS10
[12/C18]
MIL-STD-462 Version C Method CS11
[12/C21]
MIL-STD-462 Version C Method CS14
[12/MS461A] MIL-STD-461A
Electromagnetic Interference Characteristics Requirements for Equipment (CE03, CE04, RE02, RS03)
[12/MS810fa] MIL-STD-810 ver. F
Methods: 500.4, 501.4, 502.4, 503.4, 504.4, 506.4, 507.4, 509.4, 510.4, 512.4, 514.5 and 516.5
[12/RE01]
MIL-STD-462 Version C Method RE01
[12/RE02]
MIL-STD-462 Version C Method RE02
[12/RE03]
MIL-STD-462 Version C Method RE03
[12/RS01]
MIL-STD-462 Version C Method RS01
[12/RS02]
MIL-STD-462 Version C Method RS02
[12/RS03]
MIL-STD-462 Version C Method RS03
- MIL-STD-462 : Conducted Emissions
[12/A01]
MIL-STD-462 Method CE01
[12/A04]
MIL-STD-462 Method CE02
[12/A06]
MIL-STD-462 Method CE03
[12/A08]
MIL-STD-462 Method CE04
[12/A10]
MIL-STD-462 Method CE06
[12/A12]
MIL-STD-462 Method CE07
[12/A13]
MIL-STD-462 Version D Method CE101
[12/A14]
MIL-STD-462 Version D Method CE102
[12/A15]
MIL-STD-462 Version D Method CE106
[12/A16]
MIL-STD-461 Version E Method CE101
[12/A17]
MIL-STD-461 Version E Method CE102
[12/A18]
MIL-STD-461 Version E Method CE106
[12/A19]
MIL-STD-461 Version F Method CE101
[12/A20]
MIL-STD-461 Version F Method CE102
[12/A21]
MIL-STD-461 Version F Method CE106
- MIL-STD-462 : Conducted Susceptibility
[12/B01]
MIL-STD-462 Method CS01
[12/B02]
MIL-STD-462 Method CS02
[12/B04]
MIL-STD-462 Method CS03/CS04/CS05
[12/B05]
MIL-STD-462 Method CS06
[12/B06]
MIL-STD-462 Method CS07
[12/B07]
MIL-STD-462 Method CS09
[12/B08]
MIL-STD-462 Method CS10
[12/B09]
MIL-STD-462 Method CS11
[12/B10]
MIL-STD-462 Method CS12
[12/B11]
MIL-STD-462 Method CS13
[12/B12]
MIL-STD-462 Version D Method CS101
[12/B13]
MIL-STD-462 Version D Method CS103
[12/B14]
MIL-STD-462 Version D Method CS104
[12/B15]
MIL-STD-462 Version D Method CS105
[12/B16]
MIL-STD-462 Version D Method CS109
[12/B17]
MIL-STD-462 Version D Method CS114
[12/B18]
MIL-STD-462 Version D Method CS115
[12/B19]
MIL-STD-462 Version D Method CS116
[12/B20]
MIL-STD-461 Version E Method CS101
[12/B21]
MIL-STD-461 Version E Method CS103
[12/B22]
MIL-STD-461 Version E Method CS104
[12/B23]
MIL-STD-461 Version E Method CS105
[12/B24]
MIL-STD-461 Version E Method CS109
[12/B25]
MIL-STD-461 Version E Method CS114
[12/B26]
MIL-STD-461 Version E Method CS115
[12/B27]
MIL-STD-461 Version E Method CS116
[12/B28]
MIL-STD-461 Version F Method CS101
[12/B29]
MIL-STD-461 Version F Method CS103
[12/B30]
MIL-STD-461 Version F Method CS104
[12/B31]
MIL-STD-461 Version F Method CS105
[12/B32]
MIL-STD-461 Version F Method CS106
[12/B33]
MIL-STD-461 Version F Method CS109
[12/B34]
MIL-STD-461 Version F Method CS114
[12/B35]
MIL-STD-461 Version F Method CS115
[12/B36]
MIL-STD-461 Version F Method CS116
- MIL-STD-462 : Radiated Emissions
[12/D01]
MIL-STD-462 Method RE01
[12/D02]
MIL-STD-462 Method RE02
[12/D03]
MIL-STD-462 Method RE03
[12/D04]
MIL-STD-462 Version D Method RE101
[12/D05]
MIL-STD-462 Version D Method RE102
[12/D06]
MIL-STD-462 Version D Method RE103
[12/D07]
MIL-STD-461 Version E Method RE101
[12/D08]
MIL-STD-461 Version E Method RE102
[12/D09]
MIL-STD-461 Version E Method RE103
[12/D10]
MIL-STD-461 Version F Method RE101
[12/D11]
MIL-STD-461 Version F Method RE102
[12/D12]
MIL-STD-461 Version F Method RE103
- MIL-STD-462 : Radiated Susceptibility
[12/E01]
MIL-STD-462 Method RS01
[12/E02]
MIL-STD-462 Method RS02
[12/E03]
MIL-STD-462 Method RS03 (Consult laboratory for field strengths available)
[12/E07]
MIL-STD-462 Method RS06
[12/E08]
MIL-STD-462 Version D Method RS101
[12/E09]
MIL-STD-462 Version D Method RS103
[12/E11]
MIL-STD-461 Version E Method RS101
[12/E12]
MIL-STD-461 Version E Method RS103
[12/E15]
MIL-STD-461 Version F Method RS101
[12/E16]
MIL-STD-461 Version F Method RS103
- Product Safety Test Methods
[12/60529a] IEC 60529, Edition 2.1
IEC 60529:1989+A1:1999, Edition 2 with Amendment 1. Degrees of Protection by enclosures (IP code) Accreditation applies only to specific test methods (refer to IEC 60950-1 note in product safety field)
[12/606011a] IEC 60601-1 Ed. 2 (1988) +A1 (1991) +A2 (1995)
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[12/60601ab] IEC 60601-1-2, Ed. 3.0 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
[12/60601h1] EN 60601-1-2 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: EMC - Requirements and tests
[12/60611] IEC 60601-1, 3rd Ed. (2005)
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[12/61010a] IEC 61010-1 (2001-02), 2nd edition
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
[12/61010b] EN 61010-1 (2001)
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
[12/T41i] EN 60950-1 (2006), IEC 60950-1 (2005) & UL 60950-1
Information technology equipment - Safety - Part 1: General requirements
- Radio Test Methods
[12/300220d] ETSI EN 300 220-1 V2.1.1 (2006-04)
Electromagnetic Compatibility Radio Spectrum Matters; Short Range Devices; Radio Equipment to be used in the 25 MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 500mW; Part 1: Technical Characteristics and Test Methods
[12/300220e] ETSI EN 300 220-2 V2.1.1 (2006-04)
ERM; Short Range Devices; Radio Equipment to be used in the 25MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 550 mW; Part 2: Supplementary Parameters Not Intended for Conformity Purposes
[12/300328g] ETSI EN 300 328 V1.7.1 (2006-10)
ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
[12/RSS210] RSS-210, Issue 6 (Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment
[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment
[12/RSS220] RSS-220, Issue 1 (March 2009)
Devices using Ultra-Wideband (UWB) Technology
[12/RSS310] RSS-310, Issue 1 ( Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment
[12/RSS310a] RSS-310, Issue 2 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment
[12/RSSG2] RSS-Gen, Issue 2 (June 2007)
General Requirements and Information for the Certification of Radiocommunication Equipment
[12/RSSgen] RSS-Gen, Issue 1 (Sept. 2005)
General Requirements and Information for the Certification of Radiocommunication Equipment
- Telecommunications Test Methods
[12/FCC2b1] TIA/EIA 603-C (2004) with 47 CFR Part 2
General Mobile Radio Services in 47 CFR Part 90
Return to NVLAP Program Listing