Test-Con Incorporated

NVLAP Lab Code: 200018-0

Address and Contact Information:

16 East Franklin Street
P.O. Box 3116
Danbury, CT 06813-3116
Contact: Mr. Chin Okwuka
Phone: 203-748-3012
Fax: 203-778-0633
E-Mail: chin@test-con.com
Send E-Mail to Laboratory: Test-Con Incorporated
URL: http://www.test-con.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of February 10, 2012. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

Construction Materials Testing

Accreditation Valid From: October 1, 2011 Through: September 30, 2012

Aggregates

[02/A03] ASTM C29
Unit Weight and Voids in Aggregates

[02/A04] ASTM C40
Organic Impurities in Fine Aggregate

[02/A06] ASTM C88
Soundness of Aggregates by Use of Sodium Sulfate

[02/A07] ASTM C117
Materials Finer than No. 200 Sieve in Mineral Aggregates by Washing

[02/A09] ASTM C127
Specific Gravity and Absorption of Coarse Aggregate

[02/A10] ASTM C128
Specific Gravity and Absorption of Fine Aggregate

[02/A11] ASTM C131
Resistance to Degradation of Small-Size Coarse Aggregate in the Los Angeles Machine

[02/A12] ASTM C136
Sieve Analysis of Fine and Coarse Aggregates

[02/A15] ASTM D75
Practice for Sampling Aggregates

[02/A44] ASTM C566
Total Moisture Content of Aggregate by Drying

Cement

[02/A17] ASTM C109
Compressive Strength of Hydraulic Cement

[02/A51] ASTM C780 (Annex A7)
Compressive Strength of Molded Masonry Mortar Cylinders and Cubes

[02/A52] ASTM C1019
Sampling and Testing Grout

Concrete

[02/A01] ASTM C39
Compressive Strength of Cylindrical Specimens

[02/A02] ASTM C617
Capping Cylindrical Specimens

[02/A41] ASTM C192
Making and Curing Concrete Specimens in the Laboratory (requires C173, C231, C138, C143, C136, C127, C128, C566, C1064, C29, C40, C117)

[02/A43] ASTM C1064
Temperature of Freshly Mixed Portland Cement Concrete

[02/A45] ASTM C42
Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

[02/A53] ASTM C1231
Determination of Compressive Strength of Hardened Concrete Using Unbonded Caps

[02/G01] ASTM C31/C172/C143/C138/C231
Making and Curing Test Specimens/Sampling Freshly Mixed Concrete/Slump of Portland Cement Concrete/Unit Weight, Yield and Air Content/Air Content-Pressure Method

[02/G02] ASTM C173
Air Content-Volumetric Method

Road and Paving Materials

[02/M03] ASTM D140
Sampling Bituminous Materials

[02/M11] ASTM D1188
Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens

[02/M25] ASTM D2726
Bulk Density of Cores (SSD)

Soil and Rock

[02/L02] ASTM D422
Particle Size Analysis of Soils

[02/L04] ASTM D698
Moisture Density Relations of Soils and Soil-Aggregate Mixtures Using 5.5-lb Rammer and 12-inch Drop

[02/L05] ASTM D854
Specific Gravity of Soils

[02/L06] ASTM D1140
Amount of Material in Soils Finer Than the #200 Sieve

[02/L07] ASTM D1556
Density of Soil by the Sand Cone Method

[02/L08] ASTM D1557
Moisture Density Relations of Soils and Soil-Aggregate Mixtures Using 10-lb Rammer and 18-inch Drop

[02/L16] ASTM D2487
Classification of Soils for Engr. Purposes

[02/L17] ASTM D2488
Description and Identification of Soils (Visual-Manual)

[02/L20] ASTM D4318
Liquid Limit, Plastic Limit, and Plasticity Index of Soils

[02/L24] ASTM D2974
Moisture, Ash, and Organic Matter of Peat Material

[02/L26] ASTM D4221
Dispersive Characteristics of Clay Soil by Double Hydrometer

[02/L31] ASTM D2167
Density of Soil in Place by the Rubber Balloon Method

[02/L60] ASTM D6938
In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

Standard Practices and Specifications

[02/A38] ASTM E329
Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction

[02/A39] ASTM C1077
Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation (requires ASTM C31, C39, C40, C117, C127, C128, C136, C138, C143, C172, C173)

[02/A50] ASTM C1093
Standard Practice for the Accreditation of Testing Agencies for Unit Masonry

[02/L32] ASTM D3740
Standard Practice for Minimum Requirement for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

[02/M28] ASTM E1816
Standard Practice for Ultrasonic Examinations using Electromagnetic Acoustic Transducer (EMAT) Techniques

[02/S07] ASTM E709
Standard Recommended Practice for Magnetic Particle Examination

[02/S08] ASTM E165
Standard Recommended Practice for Liquid Penetrant Inspection Method

Return to NVLAP Program Listing