Technology Services, National Voluntary Laboratory Accreditation Program, NIST Go to Technology Services Home Page Go to NIST Home Page Go to National Voluntary Laboratory Accreditation Program Home Page Go to Directory of Accredited Laboratories Go to Fields of Accreditation Go to Publications/Applications Go to Mutual Recognition Arrangements Go to Assessor Resources Contact National Voluntary Laboratory Accreditation Program

Test Site Services, Inc.

NVLAP Lab Code: 100419-0

Address and Contact Information:

P.O. Box 766
Marlboro, MA 01752
Contact: Mr. Richard L. Wiedeman
Phone: 508-962-1662
Fax: 508-634-0388
E-Mail: slp5@verizon.net
Send E-Mail to Laboratory: Test Site Services, Inc.
URL: http://www.testsiteservices.com

NVLAP Accreditation Information

Listed below is the scope of accreditation for this laboratory as of November 1, 2009. For additional information, contact NVLAP at (301) 975-4016.

Send E-Mail to NVLAP at: NVLAP@nist.gov

Electromagnetic Compatibility & Telecommunications

Accreditation Valid From: October 1, 2009 Through: September 30, 2010

  • Emissions Test Methods

[12/12184] BS EN 12184 (1999) + Corrigendum No. 1
Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods

[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments

[12/610006m] EN 61000-6-4 (2007)
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments

[12/610006p] IEC 61000-6-3 (2006-06)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments

[12/61000g] EN 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments

[12/61326d] IEC 61326-1 (2005-12)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/CIS11]
IEC/CISPR 11 + A1 (1997), EN 55011 (1998), AS/NZS CISPR 11 (2002), and CNS 13803 (1997): Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical Radio-Frequency Equipment

[12/CIS11ab] CNS 13803 (2003)
Limits and methods of measurement of electromagnetic interference characteristics of industrial, scientific an medical (ISM) radio-frequency equipment

[12/CIS11e] IEC/CISPR 11 (1990), A1(1999), A2(2002) & EN 55011 (1998)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11h] AS/NZS CISPR 11 (2004)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS11jj] EN 55011 (2007) + A2 (2007)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement

[12/CIS13]
IEC/CISPR 13 (2001-04), EN 55013 (2001), AS/NZS CISPR 13 (2003), and CNS 13439 (2001): Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS13bb] EN 55013 (2001) + A1 (2003) + A2 (2006)
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/CIS14a4] EN 55014-1 (2006)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

[12/CIS14x1] IEC/CISPR 14-1, Ed. 5.0 (2005)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission

[12/CIS15] IEC/CISPR 15 (2000) + A1 (2001)
Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment

[12/CIS15a] AS/NZS CISPR 15 (2002)
Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment

[12/CIS15aa] CISPR 15 (2005-11)
Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment

[12/CIS15bb] CNS 13439 (2006)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

[12/CIS15cc] EN 55015 (2006)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

[12/CIS22] IEC/CISPR 22 (1997) & EN 55022 (1998) + A1(2000)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment

[12/CIS22a] IEC/CISPR 22 (1993) and EN 55022 (1994)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment, Amendment 1 (1995) and Amendment 2 (1996)

[12/CIS22b] CNS 13438 (1997)
Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment

[12/CIS22f] CNS 13438 (2006)
LImits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment

[12/CIS22g] IEC/CISPR 22, Edition 5 (2005-04) and EN 55022 (2006)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment

[12/CIS22j] EN 55022 (2006)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/EM01] EN 50081-1 (1992)
Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry

[12/EM02] EN 61000-3-2(1995), A1 & A2 (1998), A14(2000)
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2. Limits for harmonic current emissions (equipment input current <= 16A per phase)

[12/EM02e] AS/NZS 61000.3.2 (2003)
Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment current <= 16 A per phase)

[12/EM02i] IEC 61000-3-2, Ed. 3.0 (2005-11)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)

[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)

[12/EM03] IEC 61000-3-3(1995); EN 61000-3-3(1995); AS/NZS 2279.3(1995)
EMC - Part 3: Limits - Section 3. Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current up to 16A

[12/EM03e] BS EN 61000-3-3 (1995) & IEC 61000-3-3 (1994)+A1 & A2
EMC - Part 3: Limits - Section 3: Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

[12/EM03f] AS/NZS 61000.3.3 (2003)
Electromagnetic compatibility - Limits - Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current <= 16 A per phase and not subject to conditional connections

[12/EM03h] IEC/EN 61000-3-3 (1995) + A1 (2001) + A2 (2005)
Conducted Emissions, Voltage Flicker

[12/EN81b] EN 50081-2 (1994)
Electromagnetic compatibility - Generic emission standard - Part 2. Industrial environment

[12/F18] FCC OST/MP-5 (1986)
FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment)

[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators

[12/FCC15c] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators

[12/FCC15d] ANSI C63.17(1998) and ANSI C63.4 (2003)
with FCC Method - 47 CFR Part 15, Subpart D: Unlicensed Personal Communications Service Devices

[12/FCC15e] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart E
Unlicensed National Information Infrastructure Service Devices

[12/FCC15f] FCC Report and Order ET Docket 98-153 (FCC 02-48)
and procedures in IDB 20021108-001 with FCC Method 47 CFR Part 15, Subpart F: Ultra-Wideband Operation

[12/ICES001] ICES-001
Industrial, Scientific and Medical (ISM) Radio Frequency Generators

[12/ICES003] ICES-003 Issue 4 (2004)
Implementation and Interpretation of the Interference-Causing Equipment Standard for Digital Apparatus. (Industry Canada)

[12/ICES005] ICES-005 Issue 5 (November 1, 1998)
Radio Frequency Lighting Devices.

[12/KN11d] KN11 (2008-5) with RRL Notice No. 2008-3 (May 20, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 11

[12/KN22d] KN22 (Annex 8) with RRL Notice No. 2008-04 (Feb. 11, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)

[12/T51a] AS/NZS CISPR 22 (2004)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

[12/VCCId] Agreement of VCCI V-3 (2008.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2008.04

[12/WC01] ANSI/RESNA WC/Vol. 2-1998
American National Standard for Wheelchairs - Volume 2: Additional Requirements for Wheelchairs (Including Scooters) with Electrical Systems

  • Immunity Test Methods

[12/50199] EN 50199 (1996)
Electromagnetic compatibility (EMC) - Product standard for arc welding equipment

[12/60945] EN 60945 (1997) and IEC 945 (1996)
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements

[12/CIS14i] EN 55014-2 (1997) and IEC/CISPR 14-2 (1997)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard

[12/CIS14i2] EN 55014-2 (1997) + A1 (2001)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard

[12/EN82b] EN 50082-2 (March 1995)
Electromagnetic compatibility - Generic immunity standard - Part 2: Industrial environment

[12/F42600] SEMI F42-0600
Test method for semiconductor processing equipment voltage sag immunity

[12/F47200] SEMI F47-0200
Specification for semiconductor processing equipment voltage sag immunity

[12/I01] IEC 61000-4-2, Ed. 1.2 (2001); EN 61000-4-2
Electrostatic Discharge Immunity Test

[12/I01b] IEC 61000-4-2 (2001); EN 61000-4-2 (2001), A2 (2001)
Electrostatic Discharge Immunity Test

[12/I02g] IEC 61000-4-3, Ed. 3.0 (2006-02)
Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

[12/I02h] EN 61000-4-3 (2006)
Radiated, radio-frequency, electromagnetic field immunity test

[12/I03] IEC 61000-4-4(1995), A1(2000), A2(2001); EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/I03b] EN 61000-4-4 (1995), A1(2001), A2(2001)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/I03d] IEC 61000-4-4, Ed. 2.0; Corr1:2006
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

[12/I04] IEC 61000-4-5, Ed. 1.1 (2001-04); EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I04c] IEC 61000-4-5, Ed 1.1 (2005-11)
EMC - Part 4-5: Testing and measurement techniques - Surge immunity test

[12/I04d] BS EN 61000-4-5 (2006)
Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test

[12/I05] IEC 61000-4-6, Ed. 2.0 (2003-05); EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I05f] IEC 61000-4-6, Ed 2.0 (2006-05)
EMC - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/I05g] EN 61000-4-6 (2006)
Immunity to Conducted Disturbances, Induced by Radio Frequency Fields

[12/I07] IEC 61000-4-11, Ed. 1.1 (2001-03); EN 61000-4-11
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/I07c] IEC 61000-4-11, Ed. 2 (2004-03) & EN 61000-4-11
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

[12/I07g] IEC 61000-4-11 (2004)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests

[12/I08] IEC/CISPR 24 (1997), Amd1, A1(2001); EN 55024 (1998)
Information technology equipment - Immunity characteristics - Limits and methods of measurement

[12/I09] EN 50082-1 (1998)
Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry

[12/KN11f1] KN 61000-4-11 (Annex 7) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Voltage Dips, Short Interruptions and Voltage Variations Immunity tests)

[12/KN24d] KN 24 (2008-5) with RRL Notice No. 2008-4 (May 20, 2008)
Information Technology Equipment - immunity charateristics - limits and methods of measurements

[12/KN2c] KN 61000-4-2 (2008-5); RRL Notice No. 2008-4 (May 20, 2008)
Electrostatic Discharge Immunity Test

[12/KN3c] KN 61000-4-3 (2008-5); RRL Notice No. 2008-4 (May 20, 2008)
Radiated, radio-frequency, electromagnetic field immunity test

[12/KN4c] KN 61000-4-4 (2008-5); RRL Notice No. 2008-5 (May 20, 2008)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test

[12/KN5c] KN 61000-4-5 (2008-5); RRL Notice No. 2008-4 (May 20, 2008)
Surge Immunity Test

[12/KN6c] KN 61000-4-6 (2008-5); RRL Notice No. 2008-4 (May 20, 2008)
Electromagnetic compatibility (EMC): Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

[12/KN8c] KN 61000-4-8 (2008-5); RRL Notice No. 2008-4 (May 20, 2008)
Power Frequency Magnetic Field Immunity Test

  • Product Safety Test Methods

[12/60601aa] IEC 60601-1-2, Ed 2.1 (2004-11) & EN 60601-1-2 (2002)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests

[12/60601ab] IEC 60601-1-2, Ed. 3.0 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests

[12/60601bb] IEC 60601-2-2 Ed. 4.0 (2006)
Medical electrical equipment - Part 2-2, Particular requirements for the safety of high frequency surgical equipment

[12/60601d] IEC 60601-2-37, Ed. 1 (2001)
Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment

[12/60601i] IEC 60601-2-4:2005; EN 60601-2-4:2003
Particular requirments for the safety of cardiac defribrillators

[12/60601w] EN 60601-2-2 (2001)
Medical electrical equipment - Part 2-2, Particular requirements for the safety of high frequency surgical equipment

[12/61326] IEC 61326 (1997) + Amendment A1 (1998)
Electrical equipment for measurement, control and laboratory use - EMC requirements

  • Radio Test Methods

[12/300220a] EN 300 220-1 V1.3.1 (2000-09)
Electromagnetic compatibility and Radio spectrum Matters; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods

[12/300220c] EN 300 220-3 V1.1.1 (2000-09)
ERM; Short Range Devices; Radio equipment to be used in the 25 MHz to 1,000 MHz frequency range with power levels ranging up to 500 mW; Part 3: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300220d] ETSI EN 300 220-1 V2.1.1 (2006-04)
Electromagnetic Compatibility Radio Spectrum Matters; Short Range Devices; Radio Equipment to be used in the 25 MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 500mW; Part 1: Technical Characteristics and Test Methods

[12/300328g] ETSI EN 300 328 V1.7.1 (2006-10)
ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

[12/300330] ETSI EN 300 330 v1.2.2 (1999-05)
ERM; Short Range Devices (SRD); Technical characteristics and test methods for radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9kHz to 30 MHz

[12/300330d] ETSI EN 300 330-2 V1.3.1 (2006-04)
ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive

[12/300339] EN 300 339 v1.1.1 (1998-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM); General ElectroMagnetic Compatibility (EMC) for radio communications equipment

[12/300385] EN 300 385 V1.2.1 (1999-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for fixed radio links and ancillary equipment

[12/301489a] ETSI EN 301 489-1 v1.5.1 (2004-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

[12/301489m] ETSI EN 301 489-17 v1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment

[12/301489z] ETSI EN 301 489-1 v1.6.1 (2005-09)
ERM; ElectroMagnetic Compatability (EMC) Standard for Radio Equipment and Services; Common Technical Requirements

[12/RSS210] RSS-210, Issue 6 (Sept. 2005)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment

[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment

  • Telecommunications Test Methods

[12/1089g] GR-1089-CORE, Issue 4 (June 2006)
Electromagnetic Compatibility and Electrical Safety - General Criteria for Network Telecommunications Equipment

[12/300386c] EN 300 386 V1.3.2 (2003-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/300386f] ETSI EN 300 386 V1.3.3 (2005-04)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/300386g] ETSI EN 300 386 V1.4.1 (2008-02)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

[12/GR1089] GR-1089-CORE, Issue 3 (October 2002)
Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment

[12/IETS01] I-ETS 300 489-1 (October 1996)
Terminal Equipment (TE); Conformance testing for file transfer over the Integrated Services Digital Network (ISDN); Part 1: Profile Test Specification Summary (PTS-Summary) for the FTAM profile (ETS 300 388)

Return to NVLAP Program Listing


Return to top of page NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP Return to top of page

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: November 1, 2009

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA