Inland Foundation Engineering, Inc.NVLAP Lab Code: 100406-0
Address and Contact Information:
P.O. Box 937
San Jacinto, CA 92581
Contact: Mr. Mark D. Strahm
Phone: 951-654-1555
Fax: 951-654-0551
E-Mail: mstrahm@inlandfoundation.com
Send E-Mail to Laboratory: Inland Foundation Engineering, Inc.
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of November 1, 2009. For additional information, contact NVLAP at (301) 975-4016.
Send E-Mail to NVLAP at: NVLAP@nist.gov
Construction Materials Testing
Accreditation Valid From: April 1, 2009 Through: March 31, 2010
[02/A04] ASTM C40
Organic Impurities in Fine Aggregate
[02/A07] ASTM C117
Materials Finer than No. 200 Sieve in Mineral Aggregates by Washing
[02/A09] ASTM C127
Specific Gravity and Absorption of Coarse Aggregate
[02/A10] ASTM C128
Specific Gravity and Absorption of Fine Aggregate
[02/A11] ASTM C131
Resistance to Degradation of Small-Size Coarse Aggregate in the Los Angeles Machine
[02/A12] ASTM C136
Sieve Analysis of Fine and Coarse Aggregates
[02/A13] ASTM C142
Clay Lumps and Friable Particles in Aggregates
[02/A15] ASTM D75
Practice for Sampling Aggregates
[02/A16] ASTM D2419
Sand Equivalent Value of Soils and Fine Aggregate
[02/A44] ASTM C566
Total Moisture Content of Aggregate by Drying
[02/A46] ASTM C535
Resistance to Degradation of Large-Size Coarse Aggregate in the Los Angeles Machine
[02/A01] ASTM C39
Compressive Strength of Cylindrical Specimens
[02/A02] ASTM C617
Capping Cylindrical Specimens
[02/A43] ASTM C1064
Temperature of Freshly Mixed Portland Cement Concrete
[02/A45] ASTM C42
Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
[02/A53] ASTM C1231
Determination of Compressive Strength of Hardened Concrete Using Unbonded Caps
[02/G01] ASTM C31/C172/C143/C138/C231
Making and Curing Test Specimens/Sampling Freshly Mixed Concrete/Slump of Portland Cement Concrete/Unit Weight, Yield and Air Content/Air Content-Pressure Method
[02/G02] ASTM C173
Air Content-Volumetric Method
- Road and Paving Materials
[02/M03] ASTM D140
Sampling Bituminous Materials
[02/M07] ASTM D546
Sieve Analysis of Mineral Filler
[02/M08] ASTM D979
Sampling Bituminous Paving Mixtures
[02/M11] ASTM D1188
Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
[02/M14] ASTM D1561
Preparation of Specimens - California Kneading Compactor
[02/M27] ASTM D6307
Asphalt Content of Hot-Mix Asphalt by Ignition Method
[02/L01] ASTM D4220
Preserving and Transporting Soil Samples
[02/L02] ASTM D422
Particle Size Analysis of Soils
[02/L04] ASTM D698
Moisture Density Relations of Soils and Soil-Aggregate Mixtures Using 5.5-lb Rammer and 12-inch Drop
[02/L05] ASTM D854
Specific Gravity of Soils
[02/L06] ASTM D1140
Amount of Material in Soils Finer Than the #200 Sieve
[02/L07] ASTM D1556
Density of Soil by the Sand Cone Method
[02/L08] ASTM D1557
Moisture Density Relations of Soils and Soil-Aggregate Mixtures Using 10-lb Rammer and 18-inch Drop
[02/L13] ASTM D2216
Determination of Water (Moisture) Content of Soil, Rock, and Soil-Aggregate Mixtures
[02/L15] ASTM D2435
One-Dimensional Consolidation Properties of Soils
[02/L16] ASTM D2487
Classification of Soils for Engr. Purposes
[02/L17] ASTM D2488
Description and Identification of Soils (Visual-Manual)
[02/L18] ASTM D3080
Direct Shear Tests of Soils Under Consolidated Drained Conditions
[02/L20] ASTM D4318
Liquid Limit, Plastic Limit, and Plasticity Index of Soils
[02/L21] ASTM D2434
Permeability of Granular Soils (Constant Head)
[02/L23] ASTM D2922
Density of Soil and Soil-Aggregate in Place by Nuclear Methods (Shallow Depth)
[02/L25] ASTM D3017
Moisture Content of Soil-Aggregate in Place by Nuclear Method (Shallow Depth)
[02/L47] ASTM D2844
Resistance R-Value and Expansion Pressure of Compacted Soils
[02/A38] ASTM E329
Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
[02/A39] ASTM C1077
Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation (requires ASTM C31, C39, C40, C117, C127, C128, C136, C138, C143, C172, C173)
[02/L32] ASTM D3740
Standard Practice for Minimum Requirement for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Return to NVLAP Program Listing
NVLAP Home |
Accredited Laboratories |
Fields of Accreditation |
Publications/Applications |
Mutual Recognition Arrangements |
Assessor Resources |
Contact NVLAP 
For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:
National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov
Date created: July 26, 2002
Last Updated: November 1, 2009
Privacy
Statement / Security Notice / Accessibility Statement | Disclaimer
| FOIA
|