MET Laboratories, Inc.
NVLAP Lab Code: 100273-0
Address and Contact Information:
914 W. Patapsco AvenueBaltimore, MD 21230-3432
Contact: Mr. Jonathan Fuhrman
Phone: 410-949-1880
Fax: 410-354-3313
E-Mail: jfuhrman@metlabs.com
Send E-Mail to Laboratory: MET Laboratories, Inc.
URL: http://www.metlabs.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of May 17, 2013. For additional information, contact NVLAP at (301) 975-4016.Send E-Mail to NVLAP at: NVLAP@nist.gov
Electromagnetic Compatibility & Telecommunications
Accreditation Valid From: October 1, 2012 Through: September 30, 2013
- Emissions Test Methods
[12/1399-30] MIL-STD 1399 Section 300A
Interface standard for Shipboard Systems: Electric Power, Alternating Current
[12/60E213] RTCA DO-160E
Section 21.3, RF Emissions, Conducted
[12/60E214] RTCA DO-160E
Section 21.4, RF Emissions, Radiated
[12/ICES003] ICES-003 Issue 4 (2004)
Implementation and Interpretation of the Interference-Causing Equipment Standard for Digital Apparatus. (Industry Canada)
[12/ICES005] ICES-005 Issue 5 (November 1, 1998)
Radio Frequency Lighting Devices.
[12/MIL704f] MIL-STD-704 Revision F (March 12, 2004)
Aircraft, Electric Power Characteristics
- Immunity Test Methods
[12/10605] ISO 10605, First Edition (2001-12-15)
Road vehicles — Test methods for electrical disturbances from electrostatic discharge.
[12/1275D1] MIL-STD-1275D
Characteristics of 28 Volt DC Electrical Systems in Military Vehicles (Sections 5.3.2.2, 5.3.2.3, 5.3.2.4, 5.3.2.5)
[12/160D16] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input
[12/160D17] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike
[12/160D18] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Susceptibility - Power Inputs
[12/160D19] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility
[12/160D20] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)
[12/160D22] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility
[12/160D25] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)
[12/160F15] RTCA/DO 160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect
[12/160F16] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input
[12/160F17] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike
[12/160F18] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Suspceptibility - Power Inputs
[12/160F19] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility
[12/160F20] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)
[12/160F22] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility
[12/160F25] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)
[12/60E15] RTCA DO 160E
Section 15, Magnetic Effects
[12/60E16] RTCA DO160E
Section 16, Power Input
[12/60E17] RTCA DO-160E
Section 17, Voltage Spikes
[12/60E18] RTCA DO-160E
Section 18, Audio Frequency Conducted Susceptibility
[12/60E19] RTCA DO-160E
Section 19, Induced Signal Susceptibility
[12/60E204] RTCA DO-160E
Section 20.4, RF Susceptibility, Conducted
[12/60E205] RTCA DO-160E
Section 20.5, RF Susceptibility, Radiated
[12/60E22] RTCA DO-160E
Section 22, Lightning Induced Transient Susceptibility
[12/60E25] RTCA DO-160E
Section 25, Electrostatic Discharge (ESD)
- MIL-STD Test Methods
[12/1399a] MIL-STD1399 Section 070
Interface standard for shipboard systems, Section 070 - Part 1- DC Magnetic Field Environment
- MIL-STD-462 : Conducted Emissions
[12/A01]
MIL-STD-462 Method CE01
[12/A04]
MIL-STD-462 Method CE02
[12/A06]
MIL-STD-462 Method CE03
[12/A08]
MIL-STD-462 Method CE04
[12/A10]
MIL-STD-462 Method CE06
[12/A12]
MIL-STD-462 Method CE07
[12/A13]
MIL-STD-462 Version D Method CE101
[12/A14]
MIL-STD-462 Version D Method CE102
[12/A15]
MIL-STD-462 Version D Method CE106
[12/A16]
MIL-STD-461 Version E Method CE101
[12/A17]
MIL-STD-461 Version E Method CE102
[12/A18]
MIL-STD-461 Version E Method CE106
[12/A19]
MIL-STD-461 Version F Method CE101
[12/A20]
MIL-STD-461 Version F Method CE102
[12/A21]
MIL-STD-461 Version F Method CE106
- MIL-STD-462 : Conducted Susceptibility
[12/B01]
MIL-STD-462 Method CS01
[12/B02]
MIL-STD-462 Method CS02
[12/B04]
MIL-STD-462 Method CS03/CS04/CS05
[12/B05]
MIL-STD-462 Method CS06
[12/B06]
MIL-STD-462 Method CS07
[12/B07]
MIL-STD-462 Method CS09
[12/B08]
MIL-STD-462 Method CS10
[12/B09]
MIL-STD-462 Method CS11
[12/B10]
MIL-STD-462 Method CS12
[12/B11]
MIL-STD-462 Method CS13
[12/B12]
MIL-STD-462 Version D Method CS101
[12/B13]
MIL-STD-462 Version D Method CS103
[12/B14]
MIL-STD-462 Version D Method CS104
[12/B15]
MIL-STD-462 Version D Method CS105
[12/B16]
MIL-STD-462 Version D Method CS109
[12/B17]
MIL-STD-462 Version D Method CS114
[12/B18]
MIL-STD-462 Version D Method CS115
[12/B19]
MIL-STD-462 Version D Method CS116
[12/B20]
MIL-STD-461 Version E Method CS101
[12/B21]
MIL-STD-461 Version E Method CS103
[12/B22]
MIL-STD-461 Version E Method CS104
[12/B23]
MIL-STD-461 Version E Method CS105
[12/B24]
MIL-STD-461 Version E Method CS109
[12/B25]
MIL-STD-461 Version E Method CS114
[12/B26]
MIL-STD-461 Version E Method CS115
[12/B27]
MIL-STD-461 Version E Method CS116
[12/B28]
MIL-STD-461 Version F Method CS101
[12/B29]
MIL-STD-461 Version F Method CS103
[12/B30]
MIL-STD-461 Version F Method CS104
[12/B31]
MIL-STD-461 Version F Method CS105
[12/B32]
MIL-STD-461 Version F Method CS106
[12/B33]
MIL-STD-461 Version F Method CS109
[12/B34]
MIL-STD-461 Version F Method CS114
[12/B35]
MIL-STD-461 Version F Method CS115
[12/B36]
MIL-STD-461 Version F Method CS116
- MIL-STD-462 : Radiated Emissions
[12/D01]
MIL-STD-462 Method RE01
[12/D02]
MIL-STD-462 Method RE02
[12/D03]
MIL-STD-462 Method RE03
[12/D04]
MIL-STD-462 Version D Method RE101
[12/D05]
MIL-STD-462 Version D Method RE102
[12/D06]
MIL-STD-462 Version D Method RE103
[12/D07]
MIL-STD-461 Version E Method RE101
[12/D08]
MIL-STD-461 Version E Method RE102
[12/D09]
MIL-STD-461 Version E Method RE103
- MIL-STD-462 : Radiated Susceptibility
[12/E01]
MIL-STD-462 Method RS01
[12/E02]
MIL-STD-462 Method RS02
[12/E03]
MIL-STD-462 Method RS03 (Consult laboratory for field strengths available)
[12/E05]
MIL-STD-462 Method RS05
[12/E07]
MIL-STD-462 Method RS06
[12/E08]
MIL-STD-462 Version D Method RS101
[12/E09]
MIL-STD-462 Version D Method RS103
[12/E11]
MIL-STD-461 Version E Method RS101
[12/E12]
MIL-STD-461 Version E Method RS103
[12/E15]
MIL-STD-461 Version F Method RS101
[12/E16]
MIL-STD-461 Version F Method RS103
- Product Safety Test Methods
[12/4117] AS/NZS 4117 (1999)
Surge protective devices for telecommunications applications
- Telecommunications Test Methods
[12/ITUK21] ITU-T K.21 (10/2000) Series K
Protection Against Interference - Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents
[12/K20] ITU-T K.20 (07/2003) Series K
Protection Against Interference - Resistibility of telecommunication equipment installed in a telecommunications centre to overvoltages and overcurrents
[12/T01]
Terminal Equipment Network Protection Standards, FCC/ACTA Method - 47 CFR Part 68 - Analog and Digital
[12/TIA1096] ANSI/TIA-1096 (2006-08)
Telephone Terminal Equipment Connector Requirements for Connection of Terminal Equipment to the Telephone Network
Personal Body Armor Testing
Accreditation Valid From: October 1, 2012 Through: September 30, 2013- Personal Body Armor Testing
[29/B01] NIJ 0101.06, July 2008, Sec. 5
Ballistic Resistance of Body Armor, Section 5, Flexible Armor Conditioning Protocol
[29/B02] NIJ 0101.06, July 2008, Sec. 6
Ballistic Resistance of Body Armor, Section 6, Hard Armor Conditioning Protocol
Return to NVLAP Program Listing