TUV SUD America Inc.
NVLAP Lab Code: 100268-0
Address and Contact Information:
10040 Mesa Rim RoadSan Diego, CA 92121-1034
Contact: Mr. Stephen Lee
Phone: 978-573-2530
Fax: 978-977-0182
E-Mail: slee@tuvam.com
Send E-Mail to Laboratory: TUV SUD America Inc.
URL: http://www.tuvamerica.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of May 17, 2013. For additional information, contact NVLAP at (301) 975-4016.Send E-Mail to NVLAP at: NVLAP@nist.gov
Electromagnetic Compatibility & Telecommunications
Accreditation Valid From: January 1, 2013 Through: December 31, 2013
- ENERGY STAR
[12/619511] IEC 61951-1 Ed. 2.1 (January 2006)
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium
[12/619512] IEC 61951-2 Ed. 2.0 (April 2003)
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride
[12/61960] IEC 61960 Ed. 1.0 (December 2003)
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
[12/62301] IEC 62301 ed1.0 (2005)
Household electrical appliances - Measurement of standby power
[12/AV1] ENERGY STAR Test Method for Audio/Video Version 2.1
ENERGY STAR Program requirements Product Specification for Audio/Video, Version 2.1 Test Method, Sections 7 through 9 (Aug. 2010)
[12/BAT1] ENERGY STAR Test Method Version 1.1
ENERGY STAR Program Requirements Product Specification for Battery Charging Systems Test Method Version 1.1 Section 6
[12/COMP1] ENERGY STAR Computer Test Method Version 5.2
ENERGY STAR Program Requirements Product Specification for Computers Test Method Version 5.2
[12/ES1a] Power Supply Efficiency
IPS Generalized Internal Power Supply Efficiency Test Protocol Rev. 6.4.2
[12/IMEQ1] ENERGY STAR Imaging Equipment Test Method Version 1.2
ENERGY STAR Program Requirements Product Specification for Imaging Equipment Test Method Version 1.2
[12/SER2] ENERGY STAR Procedure for Computer Servers (Appendix A)
ENERGY STAR Test Procedure for Determining the Power Use of Computer Servers at Idle and Full Load (Appendix A of ENERGY STAR Program Requirements for Computer Servers Version 1.1)
[12/TEL1] ENERGY STAR Test Method for Telephony Version 2.2
ENERGY STAR Program Requirements Product Specifications for Telephony Test Method Version 2.2 Section 4
- Emissions Test Methods
[12/160D21] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emission of Radio Frequency Energy
[12/160F21] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 21 - Emissions of Radio Frequency Energy
[12/60E213] RTCA DO-160E
Section 21.3, RF Emissions, Conducted
[12/60E214] RTCA DO-160E
Section 21.4, RF Emissions, Radiated
[12/610006k] IEC 61000-6-4 (2006-07)
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
[12/610006m] EN 61000-6-4 (2007)
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments
[12/610006p] IEC 61000-6-3 (2006-06)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
[12/61000g] EN 61000-6-3 (2007)
Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments
[12/62040c] EN 62040-2:2006
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
[12/CIS11ab] CNS 13803 (2003)
Limits and methods of measurement of electromagnetic interference characteristics of industrial, scientific an medical (ISM) radio-frequency equipment
[12/CIS11h] AS/NZS CISPR 11 (2004)
Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11jj] EN 55011 (2007) + A2 (2007)
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
[12/CIS11p] IEC/CISPR 11 Ed. 5 (2009-05)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[12/CIS14a4] EN 55014-1 (2006)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14bb] EN 55014-1 (2006) + A1 (2009)
Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
[12/CIS14bc] EN 55014-1 (2006) +A1 (2009) +A2 (2011)
Electromagnetic Compatibility Requirements for household appliances, electric tools and similar apparatus - Part 1: Emissions
[12/CIS14x1] IEC/CISPR 14-1, Ed. 5.0 (2005)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission
[12/CIS14x2] IEC/CISPR 14-1, Ed. 5.1 (2009)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission
[12/CIS14x3] IEC/CISPR 14-1, Ed. 5.0 (2005) + A1 (2008)
Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission
[12/CIS14x4] IEC/CISPR 14-1, Ed. 5.0 (2005) + A1 (2008) + A2 (2011)
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
[12/CIS22a2] IEC/CISPR 22 (1997), A1(2000), A1(2002)
Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment
[12/CIS22a4] IEC/CISPR 22 (1993) & EN 55022 (1994)+A1(1995), A2(1997)
Limits and methods of measurement of radio disturbance characteristics of information technology equipment
[12/CIS22c4] EN 55022 (1998) + A1(2000) + A2(2003)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22f] CNS 13438 (2006) (up to 6GHz)
LImits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
[12/CIS22j] EN 55022 (2006)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS22j1] EN 55022 (2006) + A1 (2007)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/CIS24f] IEC/CISPR 24 (1997), A1 (2001), A2 (2002) and EN 55024 (1998
Information technology equipment - Immunity characteristics - Limits and methods of measurement
[12/EM02i] IEC 61000-3-2, Ed. 3.0 (2005-11)
Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase)
[12/EM02j] EN 61000-3-2 (2006)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
[12/EM03c1] IEC 61000-3-3 (1994) with A1 (2001), A2 (2005)
Electromagnetic compatibility - Limits - Limitations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current <= 16 A per phase and not subject to conditional connections
[12/EM03h] IEC/EN 61000-3-3 (1995) + A1 (2001) + A2 (2005)
Conducted Emissions, Voltage Flicker
[12/F18] FCC OST/MP-5 (1986)
FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical Equipment)
[12/FCC15b] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B
Unintentional Radiators
[12/FCC15c] ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C
Intentional Radiators
[12/FCC15c2] DA 00-705 - March 30, 2000 and KDB Pub. No. 558074
with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators - (Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems - and - New Guidance on Measurements for Digital Transmission Systems in Section 15.247)
[12/ICES003] ICES-003 Issue 4 (2004)
Implementation and Interpretation of the Interference-Causing Equipment Standard for Digital Apparatus. (Industry Canada)
[12/ICES1a] ICES-001 Issue 4 (2006)
Industrial, Scientific and Medical (ISM) Radio Frequency Generators
[12/KCC0839] KCC Notice 2008-39
Korea Technical Requirements Electromagnetic Interference (EMI)
[12/KN22d1] KN22 (Annex 8) with RRA Announce 2008-11 (Dec. 16, 2008)
Conformity Assessment Procedure for Electromagnetic Interference; With KN 22 (Annex 8)
[12/RRA01a] RRA 2011-24 and RRA 2011-30 (Dec. 23, 2011) K only
Technical and Conformity Assessment Procedures for Electromagnetic Interference; K only (See specific Annexes listed on scope)
[12/RRA02a] RRA 2012-13 and RRA 2012-21, June 28, 2012, K only
Technical Requirements and Test Methods for Electromagnetic Interference; K only (See specific Annexes listed on scope)
[12/T51b] AS/NZS CISPR 22, 3rd Edition (2006)
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
[12/TCVNa] TCVN 7189:2009 (CISPR 22:2006)
Information Technology Equipment-Radio disturbance characteristics - Limits and methods of measurement
[12/VCCId] Agreement of VCCI V-3 (2008.04)
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements: V-3/2008.04
[12/VCCIf] Agreement of VCCI V-3 (2010.04)
Agreement of VCCI Council - Technical Requirements: V-3/2010.04 (including radiated disturbance above 1 GHz)
[12/VCCIg] Agreement of VCCI V-3 (2011.04)
Agreement of VCCI Council - Technical Requirements: V-3/2011.04 (including radiated disturbance above 1 GHz)
- Immunity Test Methods
[12/160D15] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect
[12/160D16] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input
[12/160D17] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike
[12/160D18] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Susceptibility - Power Inputs
[12/160D19] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility
[12/160D20] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)
[12/160D22] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility
[12/160D25] RTCA/DO-160D (1997)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)
[12/160F15] RTCA/DO 160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 15 - Magnetic Effect
[12/160F16] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 16 - Power Input
[12/160F17] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 17 - Voltage Spike
[12/160F18] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 18 - Audio Frequency Conducted Suspceptibility - Power Inputs
[12/160F19] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 19 - Induced Signal Susceptibility
[12/160F20] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 20 - Radio Frequency Susceptibility (Radiated and Conducted)
[12/160F22] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 22 - Lightning Induced Transient Susceptibility
[12/160F25] RTCA/DO-160F (2007)
Environmental Conditions and Test Procedures for Airborne Equipment - Section 25 - Electrostatic Discharge (ESD)
[12/60E15] RTCA DO 160E
Section 15, Magnetic Effects
[12/60E16] RTCA DO160E
Section 16, Power Input
[12/60E17] RTCA DO-160E
Section 17, Voltage Spikes
[12/60E18] RTCA DO-160E
Section 18, Audio Frequency Conducted Susceptibility
[12/60E19] RTCA DO-160E
Section 19, Induced Signal Susceptibility
[12/60E204] RTCA DO-160E
Section 20.4, RF Susceptibility, Conducted
[12/60E205] RTCA DO-160E
Section 20.5, RF Susceptibility, Radiated
[12/60E22] RTCA DO-160E
Section 22, Lightning Induced Transient Susceptibility
[12/60E25] RTCA DO-160E
Section 25, Electrostatic Discharge (ESD)
[12/610006h] IEC 61000-6-1, 2nd edition (2005-03)
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments
[12/610006j] EN 61000-6-2 (2005)
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[12/61000k] EN 61000-6-1 (2007)
Electromagnetic compatibility (EMC) - Part 6 - 1: Generic standards - Immunity for residential, commercial and light-industrial environments
[12/61326a4] EN 61326-1(2006)
Electrical equipment for measurement, control and laboratory use - EMC requirements
[12/CIS14i2] EN 55014-2 (1997) + A1 (2001)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2. Immunity - Product family standard
[12/CIS14ic] IEC/CISPR 14-2 Ed. 1.2 (2008)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
[12/I01d] IEC 61000-4-2, Ed. 2.0 (2008-12)
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
[12/I02i] IEC 61000-4-3, Ed. 3.1 (2008-04)
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[12/I03c] IEC 61000-4-4, Ed. 2.0 (2004-07)
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[12/I04c] IEC 61000-4-5, Ed 1.1 (2005-11)
EMC - Part 4-5: Testing and measurement techniques - Surge immunity test
[12/I05f1] IEC 61000-4-6 Ed. 3.0 (2008)
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[12/I06] IEC 61000-4-8, Ed. 1.1 (2001); EN 61000-4-8
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[12/I06c] EN 61000-4-8 (1993) + A1 (2001)
Power Frequency Magnetic Field Immunity Test
[12/I07g] IEC 61000-4-11 (2004)
Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests
[12/I08a] EN 55024 (1998) + A1 (2001) + A2 (2003)
Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement
[12/IEC409] IEC 61000-4-9, Ed 1.1 (2001-03)
EMC - Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test
[12/IEC410] IEC 61000-4-10, Ed 1.1 (2001-03)
EMC - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
[12/IEC413] IEC 61000-4-13 Ed. 1.1 (2002) + A1 (2009)
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
[12/IEC416] IEC 61000-4-16, Edition 1.1 (2002-07)
EMC - Part 4-16: Testing and Measurement Techniques - Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range 0 Hz to 150 kHz
[12/KCC0838] KCC Notice 2008-38
Korea Technical Requirements for Electromagnetic Susceptability (EMS)
[12/KN11f1] KN 61000-4-11 (Annex 7) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Voltage Dips, Short Interruptions and Voltage Variations Immunity tests)
[12/KN2d1] KN 61000-4-2 (Annex 1); RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Precedure for EMS (Electrostatic Discharge Immunity Test)
[12/KN3c1] KN 61000-4-3 (Annex 2) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Radiated, radio-frequency, electromagnetic field immunity test)
[12/KN4c1] KN 61000-4-4 (Annex 3) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Electrical Fast Transient/Burst test)
[12/KN5c1] KN 61000-4-5 (Annex 4) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Surge Immunity Test)
[12/KN6c1] KN 61000-4-6 (Annex 5); RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Conducted disturbances, induced by radio-frequency fields test)
[12/KN8c1] KN 61000-4-8 (Annex 6) RRA Announce 2008-12 (Dec. 16, 2008)
Conformity Assessment Procedure for EMS (Power Frequency Magnetic Field Immunity Test)
[12/PC69a] ANSI/AAMI PC69:2007; (Sections 4.8 and 4.9 only)
Active implantable medical devices - Electromagnetic compatibility: EMC test Protocols for Implatable cardiac pacemakers and implantable cardioverter devibrillators
[12/RRA01b] RRA 2011-25 and RRA 2011-31 (Dec. 23, 2011) K only
Technical and Conformity Assessment Procedures for Electromagnetic Susceptibility; K only (See specific Annexes listed on scope)
[12/RRA02b] RRA 2012-14 and RRA 2012-22 (June 28, 2012) K only
Technical Requirements and Test Methods for Electromagnetic Susceptibility; K only (See specific Annexes listed on scope)
[12/TCVNb] TCVN 7317:2003 (CISPR 24:1997)
ElectroMagnetic Compatibility (EMC) - Telecommunications Terminal Equipment - Electromagnetic immunity Requirements
[Z100268-1] Exclusions
RTCA/DO-160E and RTCA/DO-160F - Single Stroke Waveform only 1,2,3,4,5B
- MIL-STD-462 : Conducted Emissions
[12/A01]
MIL-STD-462 Method CE01
[12/A04]
MIL-STD-462 Method CE02
[12/A06]
MIL-STD-462 Method CE03
[12/A08]
MIL-STD-462 Method CE04
[12/A10]
MIL-STD-462 Method CE06
[12/A12]
MIL-STD-462 Method CE07
[12/A13]
MIL-STD-462 Version D Method CE101
[12/A14]
MIL-STD-462 Version D Method CE102
[12/A15]
MIL-STD-462 Version D Method CE106
[12/A16]
MIL-STD-461 Version E Method CE101
[12/A17]
MIL-STD-461 Version E Method CE102
[12/A18]
MIL-STD-461 Version E Method CE106
[12/A19]
MIL-STD-461 Version F Method CE101
[12/A20]
MIL-STD-461 Version F Method CE102
[12/A21]
MIL-STD-461 Version F Method CE106
- MIL-STD-462 : Conducted Susceptibility
[12/B04]
MIL-STD-462 Method CS03/CS04/CS05
[12/B06]
MIL-STD-462 Method CS07
[12/B10]
MIL-STD-462 Method CS12
[12/B11]
MIL-STD-462 Method CS13
[12/B12]
MIL-STD-462 Version D Method CS101
[12/B13]
MIL-STD-462 Version D Method CS103
[12/B14]
MIL-STD-462 Version D Method CS104
[12/B15]
MIL-STD-462 Version D Method CS105
[12/B16]
MIL-STD-462 Version D Method CS109
[12/B17]
MIL-STD-462 Version D Method CS114
[12/B18]
MIL-STD-462 Version D Method CS115
[12/B19]
MIL-STD-462 Version D Method CS116
[12/B20]
MIL-STD-461 Version E Method CS101
[12/B21]
MIL-STD-461 Version E Method CS103
[12/B22]
MIL-STD-461 Version E Method CS104
[12/B23]
MIL-STD-461 Version E Method CS105
[12/B24]
MIL-STD-461 Version E Method CS109
[12/B25]
MIL-STD-461 Version E Method CS114
[12/B26]
MIL-STD-461 Version E Method CS115
[12/B27]
MIL-STD-461 Version E Method CS116
[12/B28]
MIL-STD-461 Version F Method CS101
[12/B29]
MIL-STD-461 Version F Method CS103
[12/B30]
MIL-STD-461 Version F Method CS104
[12/B31]
MIL-STD-461 Version F Method CS105
[12/B32]
MIL-STD-461 Version F Method CS106
[12/B33]
MIL-STD-461 Version F Method CS109
[12/B34]
MIL-STD-461 Version F Method CS114
[12/B35]
MIL-STD-461 Version F Method CS115
[12/B36]
MIL-STD-461 Version F Method CS116
- MIL-STD-462 : Radiated Emissions
[12/D01]
MIL-STD-462 Method RE01
[12/D02]
MIL-STD-462 Method RE02
[12/D03]
MIL-STD-462 Method RE03
[12/D04]
MIL-STD-462 Version D Method RE101
[12/D05]
MIL-STD-462 Version D Method RE102
[12/D06]
MIL-STD-462 Version D Method RE103
[12/D07]
MIL-STD-461 Version E Method RE101
[12/D08]
MIL-STD-461 Version E Method RE102
[12/D09]
MIL-STD-461 Version E Method RE103
[12/D10]
MIL-STD-461 Version F Method RE101
[12/D11]
MIL-STD-461 Version F Method RE102
[12/D12]
MIL-STD-461 Version F Method RE103
- MIL-STD-462 : Radiated Susceptibility
[12/E01]
MIL-STD-462 Method RS01
[12/E02]
MIL-STD-462 Method RS02
[12/E03]
MIL-STD-462 Method RS03 (Consult laboratory for field strengths available)
[12/E04]
MIL-STD-462 Method RS03 employing RADHAZ procedures for high level testing (Consult laboratory for field strengths available)
[12/E05]
MIL-STD-462 Method RS05
[12/E07]
MIL-STD-462 Method RS06
[12/E08]
MIL-STD-462 Version D Method RS101
[12/E09]
MIL-STD-462 Version D Method RS103
[12/E11]
MIL-STD-461 Version E Method RS101
[12/E12]
MIL-STD-461 Version E Method RS103
[12/E15]
MIL-STD-461 Version F Method RS101
[12/E16]
MIL-STD-461 Version F Method RS103
- Product Safety Test Methods
[12/60065] IEC 60065 (2001-12), 7th edition
Audio, video and similar electronic apparatus - Safety requirements
[12/60335bi] IEC 60335-1 ed. 4 (2001) +A1 (2004) +A2 (2006)
Household and similar electrical appliances - Safety - Part 1: General requirements
[12/606011a] IEC 60601-1 Ed. 2 (1988) +A1 (1991) +A2 (1995)
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[12/60601ab] IEC 60601-1-2, Ed. 3.0 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests
[12/60601e] IEC 60601-1-1 (2000-12), 2nd edition
Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems
[12/60601h1] EN 60601-1-2 (2007)
Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: EMC - Requirements and tests
[12/60601tt] EN 60601-2-24 (1998); (Section 36 only)
Medical electronic equipment Part 2-24: Particular requirements for the safety of infusion pumps and controllers
[12/60611] IEC 60601-1, 3rd Ed. (2005)
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[12/60730a] IEC 60730-1 Ed. 3.2 (2007)
Automatic electrical controls for household and similar use - Part 1: General requirements
[12/60825b] IEC 60825-2 Ed. 3.1 (2007)
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
[12/61010a] IEC 61010-1 (2001-02), 2nd edition
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
[12/62040a] IEC 62040-1-1:2004
Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas
[12/T41b] IEC 60950 (1994-04), 3rd edition
Safety of information technology equipment
[12/T41i2] IEC 60950-1, 1st Ed. (2001)
Information technology equipment - Safety - Part 1: General requirements
[12/T41i4] IEC 60950-1 Ed. 2 (2005)
Information technology equipment - Safety - Part 1: General requirements
[12/T41i6] IEC 60950-1 Ed. 2 (2006) + A1 (2009)
Information technology equipment - Safety - Part 1: General requirements
[12/T41i7] IEC 60950 Ed 2 (2005) +A1+A2+A3+A4+A11
Information technology equipment - Safety - Part 1: General requirements
[12/T50b] AS/NZS 60950.1 (2003)
Information technology equipment - Safety - Part 1: General requirements (IEC 60950-1: 2001, MOD)
[12/T50c] AS/NZS 60950.1 (2003) + A1 (2006)
Information technology equipment - Safety - Part 1: General Requirements
[12/T50d] AS/NZS 60950.1 :2011
Information technology equipment-Safety Part 1: General requirements
[12/T50e] AS/NZS 60950.1 (2003) + A1 (2006) + A2 (2008) + A3 (2008)
Information technology equipment - Safety - Part 1: General Requirements
- Radio Test Methods
[12/300220f] ETSI EN 300 220-2 V2.1.2 (2007-06)
ERM; Short Range Devices; Radio Equipment to be used in the 25MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 550 mW; Part 2: Supplementary Parameters Not Intended for Conformity Purposes
[12/300328g] ETSI EN 300 328 V1.7.1 (2006-10)
ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
[12/300330d] ETSI EN 300 330-2 V1.3.1 (2006-04)
ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive
[12/300440g] ETSI EN 300 440-2 v1.3.1 (2009-03)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
[12/301489a] ETSI EN 301 489-1 v1.5.1 (2004-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
[12/301489b] ETSI EN 301 489-3 v1.4.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz
[12/301511] EN 301 511 V9.0.2 (2003-03)
Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1,800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC)
[12/301839b] ETSI EN 301 839-2, v1.1.1 (2002-06)
ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
[12/302195] ETSI EN 302 195-2 V1.1.1 (2004-03)
(ERM); Radio equipment in the frequency range 9 kHz to 315 kHz for Ultra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
[12/31489ac] ETSI EN 301 489-1 V1.8.1 (2008-04)
ERM; ElectroMagnetic Compatibilty (EMC); Standard for Radio Equipment and Services; Part 1: Common Technical Requirements
[12/31489m] ETSI EN 301 489-17 v1.3.2 (2008-04)
Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment
[12/31489n] ETSI EN 301 489-31 V1.1.1 (2005)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9kHz to 315kHz band for Ultra Low Pwer Active
[12/48927] ETSI EN 301 489-27 V1.1.1 (2004-06)
ERM; EMC standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheal devices (ULP-AMI-P)
[12/ARIBT66] ARIB Standard STD-T66, version 2.1 (March 26, 2003)
Second Generation Low Power Data Communication System / Wireless LAN System
[12/HKTA02a] HKTA 1002 Issue 6 (1/2008)
Performance Specification for Angle-modulated Radio Transmitters and Receivers for use as Base, Repeater, Mobile and Portable Equipment in the Land Mobile Radio Service
[12/HKTA03] HKTA 1003, Issue 4 (February 2003)
Performance Specification for Private Fixed Link Equipment with a Capacity of 12 or 24 FDM-FM Channels in the Frequency Band 1429 - 1530 MHz
[12/HKTA07] HKTA 1007, Issue 4 (February 2003)
Performance Specification for Radio Interference Limits and Methods of Measurements for Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment (Excluding Surgical Diathermy Apparatus and RFExciting Arc-Welding Machines)
[12/HKTA08] HKTA 1008, Issue 3 (February 2003)
Performance Specification for Low-Power Radio Microphones, Including Associated Receiving Equipment
[12/HKTA33b] HKTA 1033, Issue 6 (May 2010)
Performance Specification of the Mobile Station and Portable Equipment for use in the Public Mobile Radiotelephone Service (PMRS) Employing Global System for Mobile Communication (GSM) and/or in the Personal Communication Service (PCS)
[12/HKTA35c] HKTA 1035, Issue 6 (May 2011)
Performance Specification for Radio Equipment Exempted From Licensing
[12/HKTA39b] HKTA 1039, Issue 4 (October 2010)
Performance Specification for Radiocommunications Apparatus Operating in the 2.4 Ghz or 5 Ghz Band and Employing Frequency Hopping or Digital Modulation
[12/HKTA42] HKTA 1042, Issue 2 (February 2003)
Performance Specification for Radio Equipment Operating in the 5 GHz Band for Wireless Access
[12/HKTA43a] HKTA 1043, Issue 4 (June 2008)
Performance Specification for Base Station Equipment for Use in the Third Generation (3G) Mobile Communications Services Employing CDMA Direct Spread (UTRA FDD)
[12/HKTA48] HKTA 1048, Issue 2, June 2008
Performance specification for user equipment for use in the third generation (3G) mobile communications services employing CDMA direct spread (UTRA FDD)
[12/HKTA49] HKTA 1049, Issue 1 (April 2005)
Performance Specification for Radio Frequency Identification (RFID) Equipment Operating in the 865 - 868 MHz and/or 920 - 925 MHz Bands
[12/HKTA51a] HKTA 1051, Issue 2 (May 2010)
Peformance Specification for Radio Frequency Identification (RFID) Equipment Operating in the 433 MHz Band
[12/HKTA52] HKTA 1052, Issue 1, January 2008
Performance specification for medical implant communication systems
[12/HKTA54] HKTA 1054, Issue 1, September 2008
Perforance sepcification for mobile station for use in the third generation (3G) mobile communications services employing CDMA2000 spread spectrum
[12/HKTA57] HKTA 1057, Issue 1 (May 2011)
Performance Specification for User Equipment for Use in Public Mobile Communications Services Based on Evolved Universal Terrestrial Radio Access (E-UTRA) Frequency Division Duplex (FDD)
[12/HKTA61] HKTA 1061, Issue 1 (May 2011)
Performance Specification for Short Range Devices Operating in the 433 MHz Band
[12/IDA01] IDA TS AR, Issue 1 (July 21, 2005)
Technical Specification for Amateur Radio Equipment
[12/IDA02] IDA TS LMR, Issue 1, (July 21, 2005)
Technical Specification for Land Mobile Radio Equipment
[12/IDA03] IDA TS RPG, Issue 1 (July 21, 2005)
Technical Specification for Radio Pagers (for Public Paging Service)
[12/IDA04] IDA TS GSM-BS, Issue 1 (July 21, 2005)
Technical Specification for GSM Base Station and Repeater Equipment
[12/IDA05] IDA TS WBA, Issue 1 (June 2005)
Technical Specification for Wireless Broadband Access (WBA) Equipment
[12/IDA15] IDA TS GMPCS, Issue 1, Rev 2 (July 21, 2005)
Technical Specification for Global Mobile Personal Communication Satellite (GMPCS) Terminal Equipment
[12/IDA16] IDA TS GSM-MT, Issue 1 (July 21, 2005)
Technical Specification for GSM Mobile Terminals
[12/IDA17] IDA TS 3G BS, Issue 1 (June 2005)
Technical Specification for IMT-2000 Third Generation (3G) Cellular Based Station and Repeater Station
[12/IDA18] IDA TS 3G-MT, Issue 1 (July 21, 2005)
Technical Specification for IMT-2000 Third Generation (3G) Cellular Mobile Terminal
[12/IDA25A] IDA TS CT-CTS, Issue 1 (Dec. 2004)
Technical Specification for Cordless Telephones and Cordless Telecommunications Systems
[12/IDA48] IDA TS SRD, Issue 1, Rev. 1 (July 21, 2005)
Technical Specification for Short Range Devices
[12/IDA51] IDA TS CMT Issue 1, June 2011
Technical Specification for Cellular Mobile Terminal
[12/IDAUWB] IDA TS UWB, Issue 1 (December 2007)
Technical Specification for Ultra Wideband (UWB) Devices)
[12/LP0002b] LP0002 (2003)
Low-power Radio-frequency Devices - Technical Regulations
[12/QCVN11] QCVN 11:2010 / BTTTT
PHS Terminal equipment
[12/QCVN12] QCVN 12:2010 / BTTTT
National technical regulation on GSM mobile stations (Phase 2 and 2+)
[12/QCVN13] QCVN 13:2010 / BTTTT
National technical regulation on 800 MHz CDMA 2000-1x mobile station
[12/QCVN15] QCVN 15:2010 / BTTTT
National technical regulation on Mobile Stations for W-CDMA FDD
[12/QCVN18] QCVN 18:2010 / BTTTT
National technical regulation on General ElectroMagnetic Compatibility for Radio Communications Equipment
[12/QCVN54] QCVN 54:2011/BTTTT
Radio equipments operating in the 2.4 GHz band and using spread spectrum modulation techniques - Technical requirements
[12/QCVN55] QCVN 55:2011/BTTTT
Short Range Devices – Radio equipment in the frequency range 9 kHz to 25 MHz
[12/RSS102] RSS-102, Issue 2 (November 12, 2005)
using IEEE 1528 and/or IEEE C95.3 - Evaluation Procedure for Mobile and Portable Radio Transmiters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields
[12/RSS210a] RSS-210, Issue 7 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category 1 Equipment
[12/RSS243] RSS-243, Issue 2 (November 12, 2005)
Active Medical Implant Communications System Devices in the 402 - 405 MHz Band
[12/RSS310a] RSS-310, Issue 2 (June 2007)
Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands): Category II Equipment
[12/RSSG2] RSS-Gen, Issue 2 (June 2007)
General Requirements and Information for the Certification of Radiocommunication Equipment
[12/TW05b] PLMN01 (2007)
GSM900 and DCS1800 Radio Terminal Equipment Technical Specifications
[12/TW09] PLMN08 (2009)
The Third Generation Mobile Telecommunication Terminal Equipment Technical Specifications
[12/TW10b] RTTE01 (2007)
2.4GHz Radio-frequency Telecommunications Terminal Equipment Technical Specification
- Site-Specific Information
[12/100268]
10m Semi-Anechoic Chamber located at 16530 Via Esprillo, MZ: 7135, San Diego, CA 92127
- Telecommunications Test Methods
[12/IDA50] IDA TS WBA, Issue 1 (June 2005)
Technical Specification for Wireless Broadband Access Equipment
Return to NVLAP Program Listing